linux-stable.git/arch/arm/Kconfig.debug, branch v3.8 Linux kernel stable tree Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2012-12-13T18:57:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-12-13T18:57:16+00:00 b8edf848e9119bab9d999b9ca80d8520641810f2 Pull ARM SoC multiplatform conversion patches from Olof Johansson: "Here are more patches in the progression towards multiplatform, sparse irq conversions in particular. Tegra has a handful of cleanups and general groundwork, but is not quite there yet on full enablement. Platforms that are enabled through this branch are VT8500 and Zynq. Note that i.MX was converted in one of the earlier cleanup branches as well (before we started a separate topic for multiplatform). And both new platforms for this merge window, sunxi and bcm, were merged with multiplatform support enabled." Fix up conflicts mostly as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: zynq: Remove all unused mach headers ARM: zynq: add support for ARCH_MULTIPLATFORM ARM: zynq: make use of debug_ll_io_init() ARM: zynq: remove TTC early mapping ARM: tegra: move debug-macro.S to include/debug ARM: tegra: don't include iomap.h from debug-macro.S ARM: tegra: decouple uncompress.h and debug-macro.S ARM: tegra: simplify DEBUG_LL UART selection options ARM: tegra: select SPARSE_IRQ ARM: tegra: enhance timer.c to get IO address from device tree ARM: tegra: enhance timer.c to get IRQ info from device tree ARM: timer: fix checkpatch warnings ARM: tegra: add TWD to device tree ARM: tegra: define DT bindings for and instantiate RTC ARM: tegra: define DT bindings for and instantiate timer clocksource/mtu-nomadik: use apb_pclk clk: ux500: Register mtu apb_pclocks ARM: plat-nomadik: convert platforms to SPARSE_IRQ mfd/db8500-prcmu: use the irq_domain_add_simple() mfd/ab8500-core: use irq_domain_add_simple() ... 
Pull ARM SoC multiplatform conversion patches from Olof Johansson:
 "Here are more patches in the progression towards multiplatform, sparse
  irq conversions in particular.

  Tegra has a handful of cleanups and general groundwork, but is not
  quite there yet on full enablement.

  Platforms that are enabled through this branch are VT8500 and Zynq.
  Note that i.MX was converted in one of the earlier cleanup branches as
  well (before we started a separate topic for multiplatform).  And both
  new platforms for this merge window, sunxi and bcm, were merged with
  multiplatform support enabled."

Fix up conflicts mostly as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: tegra: move debug-macro.S to include/debug
  ARM: tegra: don't include iomap.h from debug-macro.S
  ARM: tegra: decouple uncompress.h and debug-macro.S
  ARM: tegra: simplify DEBUG_LL UART selection options
  ARM: tegra: select SPARSE_IRQ
  ARM: tegra: enhance timer.c to get IO address from device tree
  ARM: tegra: enhance timer.c to get IRQ info from device tree
  ARM: timer: fix checkpatch warnings
  ARM: tegra: add TWD to device tree
  ARM: tegra: define DT bindings for and instantiate RTC
  ARM: tegra: define DT bindings for and instantiate timer
  clocksource/mtu-nomadik: use apb_pclk
  clk: ux500: Register mtu apb_pclocks
  ARM: plat-nomadik: convert platforms to SPARSE_IRQ
  mfd/db8500-prcmu: use the irq_domain_add_simple()
  mfd/ab8500-core: use irq_domain_add_simple()
  ...
Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2012-12-13T18:39:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-12-13T18:39:26+00:00 db5b0ae00712b5176d7405e7a1dd2bfd6e8f5070 Pull ARM SoC device tree conversions and enablement from Olof Johansson: "Continued device tree conversion and enablement across a number of platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other smaller series as well. ux500 has seen continued conversion for platforms. Several platforms have seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra is adding data for new devices/drivers, and Exynos has a bunch of new bindings and devices added as well. So, pretty much the same progression in the right direction as the last few releases." Fix up conflicts as per Olof. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits) ARM: ux500: Rename dbx500 cpufreq code to be more generic ARM: dts: add missing ux500 device trees ARM: ux500: Stop registering the PCM driver from platform code ARM: ux500: Move board specific GPIO info out to subordinate DTS files ARM: ux500: Disable the MMCI gpio-regulator by default ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ... 
Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...
Merge branch 'next/devel-samsung-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc 2012-11-30T17:32:24+00:00 Olof Johansson olof@lixom.net 2012-11-30T17:31:49+00:00 79870b7bca5a23c4b263b9a3335c67f1a7829f3e From Kukjin Kim: This is including Samsung small updates(developments) for v3.8. Add node PL330 MDMA1 and UART3 for DEBUG_LL and secondary cpu bring-up for exynos4412. * 'next/devel-samsung-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports Signed-off-by: Olof Johansson <olof@lixom.net> 
From Kukjin Kim:

This is including Samsung small updates(developments) for v3.8.

Add node PL330 MDMA1 and UART3 for DEBUG_LL and secondary cpu bring-up
for exynos4412.

* 'next/devel-samsung-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports

Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: EXYNOS: add UART3 to DEBUG_LL ports 2012-11-27T23:04:21+00:00 Olof Johansson olof@lixom.net 2012-11-22T05:24:04+00:00 5fa23dde6e9a20a9c4bb3ff280ed84478829540d Add support for using UART3 for DEBUG_LL on exynos. [dianders: added depend on ARCH_EXYNOS.] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 
Add support for using UART3 for DEBUG_LL on exynos.

[dianders: added depend on ARCH_EXYNOS.]

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Merge branch 'zynq/multiplatform' of git://git.monstr.eu/linux-2.6-microblaze into next/multiplatform 2012-11-21T19:49:45+00:00 Olof Johansson olof@lixom.net 2012-11-21T19:49:45+00:00 3f54db784a6af9a6d53396949cbecf62edbad247 From Michal Simek: This branch depends on arm-soc devel/debug_ll_init branch because we needed Rob's "ARM: implement debug_ll_io_init()" (sha1: afaee03511ba8002b26a9c6b1fe7d6baf33eac86) patch. This branch also depends on zynq/dt branch because of previous major zynq changes. zynq/cleanup branch is subset of zynq/dt. * 'zynq/multiplatform' of git://git.monstr.eu/linux-2.6-microblaze: ARM: zynq: Remove all unused mach headers ARM: zynq: add support for ARCH_MULTIPLATFORM ARM: zynq: make use of debug_ll_io_init() ARM: zynq: remove TTC early mapping ARM: zynq: add clk binding support to the ttc ARM: zynq: use zynq clk bindings clk: Add support for fundamental zynq clks ARM: zynq: dts: split up device tree ARM: zynq: Allow UART1 to be used as DEBUG_LL console. ARM: zynq: dts: add description of the second uart ARM: zynq: move arm-specific sys_timer out of ttc zynq: move static peripheral mappings zynq: remove use of CLKDEV_LOOKUP zynq: use pl310 device tree bindings zynq: use GIC device tree bindings Add/add conflict in arch/arm/Kconfig.debug. Signed-off-by: Olof Johansson <olof@lixom.net> 
From Michal Simek:

This branch depends on arm-soc devel/debug_ll_init branch because
we needed Rob's "ARM: implement debug_ll_io_init()"
(sha1: afaee03511ba8002b26a9c6b1fe7d6baf33eac86)
patch.

This branch also depends on zynq/dt branch because of previous major
zynq changes.
zynq/cleanup branch is subset of zynq/dt.

* 'zynq/multiplatform' of git://git.monstr.eu/linux-2.6-microblaze:
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: zynq: add clk binding support to the ttc
  ARM: zynq: use zynq clk bindings
  clk: Add support for fundamental zynq clks
  ARM: zynq: dts: split up device tree
  ARM: zynq: Allow UART1 to be used as DEBUG_LL console.
  ARM: zynq: dts: add description of the second uart
  ARM: zynq: move arm-specific sys_timer out of ttc
  zynq: move static peripheral mappings
  zynq: remove use of CLKDEV_LOOKUP
  zynq: use pl310 device tree bindings
  zynq: use GIC device tree bindings

Add/add conflict in arch/arm/Kconfig.debug.

Signed-off-by: Olof Johansson <olof@lixom.net>
Merge branch 'sunxi/soc2' into next/soc 2012-11-21T18:52:44+00:00 Olof Johansson olof@lixom.net 2012-11-21T18:52:05+00:00 e9f6d13513ea9fd33b0184db8fc33cf51baa584b From Maxime Ripard: Here is a pull request to add the support for Allwinner A10 SoCs. * sunxi/soc2: ARM: sunxi: Add sunxi restart function via onchip watchdog ARM: sunxi: Add sun4i and cubieboard support ARM: sunxi: Add earlyprintk support for UART0 (sun4i) ARM: sunxi: Restructure sunxi dts/dtsi files Signed-off-by: Olof Johansson <olof@lixom.net> 
From Maxime Ripard:

Here is a pull request to add the support for Allwinner A10 SoCs.

* sunxi/soc2:
  ARM: sunxi: Add sunxi restart function via onchip watchdog
  ARM: sunxi: Add sun4i and cubieboard support
  ARM: sunxi: Add earlyprintk support for UART0 (sun4i)
  ARM: sunxi: Restructure sunxi dts/dtsi files

Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: zynq: make use of debug_ll_io_init() 2012-11-21T09:52:05+00:00 Josh Cartwright josh.cartwright@ni.com 2012-11-19T16:16:01+00:00 385f02b1696004461d89589e69ae7247081a74a2 Convert low-level debugging routines to make use of debug_ll_io_init(). This is part of the preparation for ARCH_MULTIPLATFORM support for Zynq. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com> 
Convert low-level debugging routines to make use of debug_ll_io_init().
This is part of the preparation for ARCH_MULTIPLATFORM support for Zynq.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Merge tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux into next/soc 2012-11-21T06:14:59+00:00 Olof Johansson olof@lixom.net 2012-11-21T06:14:59+00:00 5ffd785402c295328d3866d9f8630152f51d332a From Maxime Ripard: Allwinner SoC support for 3.8 * tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux: ARM: sunxi: Add entry to MAINTAINERS ARM: sunxi: Add device tree for the A13 and the Olinuxino board ARM: sunxi: Add earlyprintk support ARM: sunxi: Add basic support for Allwinner A1x SoCs irqchip: sunxi: Add irq controller driver clocksource: sunxi: Add Allwinner A1X Timer Driver clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs Signed-off-by: Olof Johansson <olof@lixom.net> 
From Maxime Ripard:
Allwinner SoC support for 3.8

* tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux:
  ARM: sunxi: Add entry to MAINTAINERS
  ARM: sunxi: Add device tree for the A13 and the Olinuxino board
  ARM: sunxi: Add earlyprintk support
  ARM: sunxi: Add basic support for Allwinner A1x SoCs
  irqchip: sunxi: Add irq controller driver
  clocksource: sunxi: Add Allwinner A1X Timer Driver
  clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs

Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: sunxi: Add earlyprintk support for UART0 (sun4i) 2012-11-20T14:36:21+00:00 Stefan Roese sr@denx.de 2012-11-19T11:09:41+00:00 aa25115aff14a149a6b611fe54776c142e483781 Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
ARM: sunxi: Add earlyprintk support 2012-11-16T20:56:52+00:00 Maxime Ripard maxime.ripard@free-electrons.com 2012-11-08T11:40:49+00:00 cb84fa18a40fb142d725bf5c7594a0a16cd96289 Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stefan Roese <sr@denx.de> 
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Stefan Roese <sr@denx.de>