linux-stable.git/arch/arc, branch v5.4.71

ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id

2020-09-17T11:47:48+00:00

[ Upstream commit 26907eb605fbc3ba9dbf888f21d9d8d04471271d ]

HSDK board has Micrel KSZ9031, recent commit
bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII
specification it is necessary to have delay on RX (PHY to MAX)
which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.

Also adding name of PHY placed on HSDK board.

Signed-off-by: Evgeniy Didin 
Cc: Eugeniy Paltsev 
Cc: Alexey Brodkin 
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

irqchip/eznps: Fix build error for !ARC700 builds

2020-09-17T11:47:47+00:00

[ Upstream commit 89d29997f103d08264b0685796b420d911658b96 ]

eznps driver is supposed to be platform independent however it ends up
including stuff from inside arch/arc headers leading to rand config
build errors.

The quick hack to fix this (proper fix is too much chrun for non active
user-base) is to add following to nps platform agnostic header.
 - copy AUX_IENABLE from arch/arc header
 - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/**

Reported-by: kernel test robot 
Reported-by: Sebastian Andrzej Siewior 
Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARC: HSDK: wireup perf irq

2020-09-17T11:47:45+00:00

[ Upstream commit fe81d927b78c4f0557836661d32e41ebc957b024 ]

Newer version of HSDK aka HSDK-4xD (with dual issue HS48x4 CPU) wired up
the perf interrupt, so enable that in DT.
This is OK for old HSDK where this irq is ignored because pct irq is not
wired up in hardware.

Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARC: perf: don't bail setup if pct irq missing in device-tree

2020-09-09T17:12:30+00:00

commit feb92d7d3813456c11dce215b3421801a78a8986 upstream.

Current code inadventely bails if hardware supports sampling/overflow
interrupts, but the irq is missing from device tree.

|
| # perf stat -e cycles,instructions,major-faults,minor-faults ../hackbench
| Running with 10 groups 400 process
| Time: 0.921
|
| Performance counter stats for '../hackbench':
|
|         cycles
|         instructions
|                 0      major-faults
|              8679      minor-faults

This need not be as we can still do simple counting based perf stat.
This unborks perf on HSDK-4xD

Cc: 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

ARC: elf: use right ELF_ARCH

2020-07-16T06:16:46+00:00

commit b7faf971081a4e56147f082234bfff55135305cb upstream.

Cc: 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACE

2020-07-16T06:16:46+00:00

commit 00fdec98d9881bf5173af09aebd353ab3b9ac729 upstream.

Trap handler for syscall tracing reads EFA (Exception Fault Address),
in case strace wants PC of trap instruction (EFA is not part of pt_regs
as of current code).

However this EFA read is racy as it happens after dropping to pure
kernel mode (re-enabling interrupts). A taken interrupt could
context-switch, trigger a different task's trap, clobbering EFA for this
execution context.

Fix this by reading EFA early, before re-enabling interrupts. A slight
side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler.
The trap handler is common to both ARCompact and ARCv2 builds too.

This just came out of code rework/review and no real problem was reported
but is clearly a potential problem specially for strace.

Cc: 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT

2020-06-07T11:18:50+00:00

[ Upstream commit 799587d5731db9dcdafaac4002463aa7d9cd6cf7 ]

Elide invalid configuration EZNPS + ARCv2, triggered by a
make allyesconfig build.

Granted the root cause is in source code (asm/barrier.h) where we check
for ARCv2 before PLAT_EZNPS, but it is better to avoid such combinations
at onset rather then baking subtle nuances into code.

Reported-by: kbuild test robot 
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARC: Fix ICCM & DCCM runtime size checks

2020-06-07T11:18:50+00:00

[ Upstream commit 43900edf67d7ef3ac8909854d75b8a1fba2d570c ]

As of today the ICCM and DCCM size checks are incorrectly using
mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ
and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in
runtime and stored in cpu->dccm.sz and cpu->iccm.sz is in bytes.

Fix that.

Reported-by: Paul Greco 
Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARC: define __ALIGN_STR and __ALIGN symbols for ARC

2020-03-18T06:17:52+00:00

commit 8d92e992a785f35d23f845206cf8c6cafbc264e0 upstream.

The default defintions use fill pattern 0x90 for padding which for ARC
generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090

So use ".align 4" which insert a "nop_s" instruction instead.

Cc: stable@vger.kernel.org
Acked-by: Vineet Gupta 
Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node

2020-02-14T21:34:12+00:00

commit 7980dff398f86a618f502378fa27cf7e77449afa upstream.

Add a missing property to GMAC node so that multicast filtering works
correctly.

Fixes: 556cc1c5f528 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)")
Acked-by: Alexey Brodkin 
Signed-off-by: Jose Abreu 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman