<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/arch/arc, branch v5.4.49</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT</title>
<updated>2020-06-07T11:18:50+00:00</updated>
<author>
<name>Vineet Gupta</name>
<email>vgupta@synopsys.com</email>
</author>
<published>2020-04-14T18:41:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=31ca6427f64dd4c05b6725baf2d8c8c445d68b77'/>
<id>31ca6427f64dd4c05b6725baf2d8c8c445d68b77</id>
<content type='text'>
[ Upstream commit 799587d5731db9dcdafaac4002463aa7d9cd6cf7 ]

Elide invalid configuration EZNPS + ARCv2, triggered by a
make allyesconfig build.

Granted the root cause is in source code (asm/barrier.h) where we check
for ARCv2 before PLAT_EZNPS, but it is better to avoid such combinations
at onset rather then baking subtle nuances into code.

Reported-by: kbuild test robot &lt;lkp@intel.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 799587d5731db9dcdafaac4002463aa7d9cd6cf7 ]

Elide invalid configuration EZNPS + ARCv2, triggered by a
make allyesconfig build.

Granted the root cause is in source code (asm/barrier.h) where we check
for ARCv2 before PLAT_EZNPS, but it is better to avoid such combinations
at onset rather then baking subtle nuances into code.

Reported-by: kbuild test robot &lt;lkp@intel.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARC: Fix ICCM &amp; DCCM runtime size checks</title>
<updated>2020-06-07T11:18:50+00:00</updated>
<author>
<name>Eugeniy Paltsev</name>
<email>Eugeniy.Paltsev@synopsys.com</email>
</author>
<published>2020-04-02T17:54:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=935ba01e80d48ef81e5608ef4a7252f138f5a06c'/>
<id>935ba01e80d48ef81e5608ef4a7252f138f5a06c</id>
<content type='text'>
[ Upstream commit 43900edf67d7ef3ac8909854d75b8a1fba2d570c ]

As of today the ICCM and DCCM size checks are incorrectly using
mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ
and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in
runtime and stored in cpu-&gt;dccm.sz and cpu-&gt;iccm.sz is in bytes.

Fix that.

Reported-by: Paul Greco &lt;pmgreco@us.ibm.com&gt;
Signed-off-by: Eugeniy Paltsev &lt;Eugeniy.Paltsev@synopsys.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 43900edf67d7ef3ac8909854d75b8a1fba2d570c ]

As of today the ICCM and DCCM size checks are incorrectly using
mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ
and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in
runtime and stored in cpu-&gt;dccm.sz and cpu-&gt;iccm.sz is in bytes.

Fix that.

Reported-by: Paul Greco &lt;pmgreco@us.ibm.com&gt;
Signed-off-by: Eugeniy Paltsev &lt;Eugeniy.Paltsev@synopsys.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARC: define __ALIGN_STR and __ALIGN symbols for ARC</title>
<updated>2020-03-18T06:17:52+00:00</updated>
<author>
<name>Eugeniy Paltsev</name>
<email>Eugeniy.Paltsev@synopsys.com</email>
</author>
<published>2020-03-11T16:26:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f2947aa48017fdf9812843fee0724dcd72180a03'/>
<id>f2947aa48017fdf9812843fee0724dcd72180a03</id>
<content type='text'>
commit 8d92e992a785f35d23f845206cf8c6cafbc264e0 upstream.

The default defintions use fill pattern 0x90 for padding which for ARC
generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090

So use ".align 4" which insert a "nop_s" instruction instead.

Cc: stable@vger.kernel.org
Acked-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Eugeniy Paltsev &lt;Eugeniy.Paltsev@synopsys.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 8d92e992a785f35d23f845206cf8c6cafbc264e0 upstream.

The default defintions use fill pattern 0x90 for padding which for ARC
generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090

So use ".align 4" which insert a "nop_s" instruction instead.

Cc: stable@vger.kernel.org
Acked-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Eugeniy Paltsev &lt;Eugeniy.Paltsev@synopsys.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node</title>
<updated>2020-02-14T21:34:12+00:00</updated>
<author>
<name>Jose Abreu</name>
<email>Jose.Abreu@synopsys.com</email>
</author>
<published>2020-01-14T16:09:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b09e3d3e79cf9c0cb11768eb60a27e35720d7e26'/>
<id>b09e3d3e79cf9c0cb11768eb60a27e35720d7e26</id>
<content type='text'>
commit 7980dff398f86a618f502378fa27cf7e77449afa upstream.

Add a missing property to GMAC node so that multicast filtering works
correctly.

Fixes: 556cc1c5f528 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)")
Acked-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Signed-off-by: Jose Abreu &lt;Jose.Abreu@synopsys.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 7980dff398f86a618f502378fa27cf7e77449afa upstream.

Add a missing property to GMAC node so that multicast filtering works
correctly.

Fixes: 556cc1c5f528 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)")
Acked-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Signed-off-by: Jose Abreu &lt;Jose.Abreu@synopsys.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>arc: eznps: fix allmodconfig kconfig warning</title>
<updated>2020-02-01T09:34:40+00:00</updated>
<author>
<name>Randy Dunlap</name>
<email>rdunlap@infradead.org</email>
</author>
<published>2019-11-27T01:54:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ae9484c6fb6024e70eee942cecfea5022ea2b741'/>
<id>ae9484c6fb6024e70eee942cecfea5022ea2b741</id>
<content type='text'>
[ Upstream commit 1928b36cfa4df1aeedf5f2644d0c33f3a1fcfd7b ]

Fix kconfig warning for arch/arc/plat-eznps/Kconfig allmodconfig:

WARNING: unmet direct dependencies detected for CLKSRC_NPS
  Depends on [n]: GENERIC_CLOCKEVENTS [=y] &amp;&amp; !PHYS_ADDR_T_64BIT [=y]
  Selected by [y]:
  - ARC_PLAT_EZNPS [=y]

Signed-off-by: Randy Dunlap &lt;rdunlap@infradead.org&gt;
Cc: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Cc: Ofer Levi &lt;oferle@mellanox.com&gt;
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 1928b36cfa4df1aeedf5f2644d0c33f3a1fcfd7b ]

Fix kconfig warning for arch/arc/plat-eznps/Kconfig allmodconfig:

WARNING: unmet direct dependencies detected for CLKSRC_NPS
  Depends on [n]: GENERIC_CLOCKEVENTS [=y] &amp;&amp; !PHYS_ADDR_T_64BIT [=y]
  Selected by [y]:
  - ARC_PLAT_EZNPS [=y]

Signed-off-by: Randy Dunlap &lt;rdunlap@infradead.org&gt;
Cc: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Cc: Ofer Levi &lt;oferle@mellanox.com&gt;
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARC: perf: Accommodate big-endian CPU</title>
<updated>2019-10-22T16:59:43+00:00</updated>
<author>
<name>Alexey Brodkin</name>
<email>Alexey.Brodkin@synopsys.com</email>
</author>
<published>2019-10-22T14:04:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5effc09c4907901f0e71e68e5f2e14211d9a203f'/>
<id>5effc09c4907901f0e71e68e5f2e14211d9a203f</id>
<content type='text'>
8-letter strings representing ARC perf events are stores in two
32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc.

And the same order of bytes in the word is used regardless CPU endianness.

Which means in case of big-endian CPU core we need to swap bytes to get
the same order as if it was on little-endian CPU.

Otherwise we're seeing the following error message on boot:
-------------------------&gt;8----------------------
ARC perf        : 8 counters (32 bits), 40 conditions, [overflow IRQ support]
sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3
Stack Trace:
  arc_unwind_core+0xd4/0xfc
  dump_stack+0x64/0x80
  sysfs_warn_dup+0x46/0x58
  sysfs_add_file_mode_ns+0xb2/0x168
  create_files+0x70/0x2a0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0
Failed to register pmu: arc_pct, reason -17
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3
Stack Trace:
  arc_unwind_core+0xd4/0xfc
  dump_stack+0x64/0x80
  __warn+0x9c/0xd4
  warn_slowpath_fmt+0x22/0x2c
  perf_event_sysfs_init+0x70/0xa0
---[ end trace a75fb9a9837bd1ec ]---
-------------------------&gt;8----------------------

What happens here we're trying to register more than one raw perf event
with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters
and encoded into two 32-bit words. In this particular case we deal with 2
events:
 * "IJMP____" which counts all jump &amp; branch instructions
 * "IJMPC___" which counts only conditional jumps &amp; branches

Those strings are split in two 32-bit words this way "IJMP" + "____" &amp;
"IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core
being big-endian then we read "PMJI" + "____" &amp; "PMJI" + "___C".

And since we interpret read array of ASCII letters as a null-terminated string
on big-endian CPU we end up with 2 events of the same name "PMJI".

Signed-off-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
8-letter strings representing ARC perf events are stores in two
32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc.

And the same order of bytes in the word is used regardless CPU endianness.

Which means in case of big-endian CPU core we need to swap bytes to get
the same order as if it was on little-endian CPU.

Otherwise we're seeing the following error message on boot:
-------------------------&gt;8----------------------
ARC perf        : 8 counters (32 bits), 40 conditions, [overflow IRQ support]
sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3
Stack Trace:
  arc_unwind_core+0xd4/0xfc
  dump_stack+0x64/0x80
  sysfs_warn_dup+0x46/0x58
  sysfs_add_file_mode_ns+0xb2/0x168
  create_files+0x70/0x2a0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0
Failed to register pmu: arc_pct, reason -17
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3
Stack Trace:
  arc_unwind_core+0xd4/0xfc
  dump_stack+0x64/0x80
  __warn+0x9c/0xd4
  warn_slowpath_fmt+0x22/0x2c
  perf_event_sysfs_init+0x70/0xa0
---[ end trace a75fb9a9837bd1ec ]---
-------------------------&gt;8----------------------

What happens here we're trying to register more than one raw perf event
with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters
and encoded into two 32-bit words. In this particular case we deal with 2
events:
 * "IJMP____" which counts all jump &amp; branch instructions
 * "IJMPC___" which counts only conditional jumps &amp; branches

Those strings are split in two 32-bit words this way "IJMP" + "____" &amp;
"IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core
being big-endian then we read "PMJI" + "____" &amp; "PMJI" + "___C".

And since we interpret read array of ASCII letters as a null-terminated string
on big-endian CPU we end up with 2 events of the same name "PMJI".

Signed-off-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARC: [plat-hsdk]: Enable on-boardi SPI ADC IC</title>
<updated>2019-10-22T16:58:29+00:00</updated>
<author>
<name>Eugeniy Paltsev</name>
<email>Eugeniy.Paltsev@synopsys.com</email>
</author>
<published>2019-10-18T11:11:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ab563bf54a4d08cb59e7d7bcd419f7e8558a4964'/>
<id>ab563bf54a4d08cb59e7d7bcd419f7e8558a4964</id>
<content type='text'>
HSDK board has adc108s102 SPI ADC IC installed, enable it.

Acked-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Signed-off-by: Eugeniy Paltsev &lt;Eugeniy.Paltsev@synopsys.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
HSDK board has adc108s102 SPI ADC IC installed, enable it.

Acked-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Signed-off-by: Eugeniy Paltsev &lt;Eugeniy.Paltsev@synopsys.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARC: [plat-hsdk]: Enable on-board SPI NOR flash IC</title>
<updated>2019-10-22T16:58:29+00:00</updated>
<author>
<name>Eugeniy Paltsev</name>
<email>Eugeniy.Paltsev@synopsys.com</email>
</author>
<published>2019-10-18T11:11:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8ca8fa7f22dcb0a3265490a690b0c3e27de681f9'/>
<id>8ca8fa7f22dcb0a3265490a690b0c3e27de681f9</id>
<content type='text'>
HSDK board has sst26wf016b SPI NOR flash IC installed, enable it.

Acked-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Signed-off-by: Eugeniy Paltsev &lt;Eugeniy.Paltsev@synopsys.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
HSDK board has sst26wf016b SPI NOR flash IC installed, enable it.

Acked-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Signed-off-by: Eugeniy Paltsev &lt;Eugeniy.Paltsev@synopsys.com&gt;
Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: treewide: clarify pgtable_page_{ctor,dtor}() naming</title>
<updated>2019-09-26T17:10:44+00:00</updated>
<author>
<name>Mark Rutland</name>
<email>mark.rutland@arm.com</email>
</author>
<published>2019-09-25T23:49:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b4ed71f557e458257e0f71b11969954acb389240'/>
<id>b4ed71f557e458257e0f71b11969954acb389240</id>
<content type='text'>
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.

To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().

These changes were generated with the following shell script:

----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
    sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
    sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----

... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.

There should be no functional change as a result of this patch.

Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland &lt;mark.rutland@arm.com&gt;
Reviewed-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;	[m68k]
Cc: Anshuman Khandual &lt;anshuman.khandual@arm.com&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Cc: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: Yu Zhao &lt;yuzhao@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.

To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().

These changes were generated with the following shell script:

----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
    sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
    sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----

... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.

There should be no functional change as a result of this patch.

Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland &lt;mark.rutland@arm.com&gt;
Reviewed-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;	[m68k]
Cc: Anshuman Khandual &lt;anshuman.khandual@arm.com&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Cc: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: Yu Zhao &lt;yuzhao@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: consolidate pgtable_cache_init() and pgd_cache_init()</title>
<updated>2019-09-24T22:54:09+00:00</updated>
<author>
<name>Mike Rapoport</name>
<email>rppt@linux.ibm.com</email>
</author>
<published>2019-09-23T22:35:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=782de70c42930baae55234f3df0dc90774924447'/>
<id>782de70c42930baae55234f3df0dc90774924447</id>
<content type='text'>
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.

Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init().  Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.

Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().

Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Acked-by: Will Deacon &lt;will@kernel.org&gt;		[arm64]
Acked-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;	[x86]
Cc: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.

Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init().  Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.

Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().

Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Acked-by: Will Deacon &lt;will@kernel.org&gt;		[arm64]
Acked-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;	[x86]
Cc: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
