linux-stable.git/arch/arc, branch v4.14.331

arc: iounmap() arg is volatile

2022-11-03T14:50:54+00:00

[ Upstream commit c44f15c1c09481d50fd33478ebb5b8284f8f5edb ]

Add 'volatile' to iounmap()'s argument to prevent build warnings.
This make it the same as other major architectures.

Placates these warnings: (12 such warnings)

../drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':
../drivers/video/fbdev/riva/fbdev.c:2067:42: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Werror=discarded-qualifiers]
 2067 |                 iounmap(default_par->riva.PRAMIN);

Fixes: 1162b0701b14b ("ARC: I/O and DMA Mappings")
Signed-off-by: Randy Dunlap 
Cc: Vineet Gupta 
Cc: linux-snps-arc@lists.infradead.org
Cc: Arnd Bergmann 
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARC: entry: fix syscall_trace_exit argument

2022-04-27T11:15:31+00:00

commit b1c6ecfdd06907554518ec384ce8e99889d15193 upstream.

Function syscall_trace_exit expects pointer to pt_regs. However
r0 is also used to keep syscall return value. Restore pointer
to pt_regs before calling syscall_trace_exit.

Cc: 
Signed-off-by: Sergey Matyukevich 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

2021-11-12T13:28:22+00:00

[ Upstream commit cef397038167ac15d085914493d6c86385773709 ]

Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : []    lr : []    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.

I looked up the possible number of bits in source code and
datasheets, here is what I found:

 - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
 - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
   support more than 32 bits, even though supersections in theory allow
   up to 40 bits as well.
 - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
   XPA supports up to 60 bits in theory, but 40 bits are more than
   anyone will ever ship
 - On PowerPC, there are three different implementations of 36 bit
   addressing, but 32-bit is used without CONFIG_PTE_64BIT
 - On RISC-V, the normal page table format can support 34 bit
   addressing. There is no highmem support on RISC-V, so anything
   above 2GB is unused, but it might be useful to eventually support
   CONFIG_ZRAM for high pages.

Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer 
Reviewed-by: Stefan Agner 
Tested-by: Stefan Agner 
Acked-by: Mike Rapoport 
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann 
Signed-off-by: Sasha Levin 
[florian: patch arch/powerpc/include/asm/pte-common.h for 4.14.y
removed arch/riscv/include/asm/pgtable.h which does not exist]
Signed-off-by: Florian Fainelli 
Signed-off-by: Greg Kroah-Hartman

ARC: export clear_user_page() for modules

2021-09-22T09:45:35+00:00

[ Upstream commit 6b5ff0405e4190f23780362ea324b250bc495683 ]

0day bot reports a build error:
  ERROR: modpost: "clear_user_page" [drivers/media/v4l2-core/videobuf-dma-sg.ko] undefined!
so export it in arch/arc/ to fix the build error.

In most ARCHes, clear_user_page() is a macro. OTOH, in a few
ARCHes it is a function and needs to be exported.
PowerPC exported it in 2004. It looks like nds32 and nios2
still need to have it exported.

Fixes: 4102b53392d63 ("ARC: [mm] Aliasing VIPT dcache support 2/4")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Cc: Guenter Roeck 
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARC: Fix CONFIG_STACKDEPOT

2021-09-03T07:56:24+00:00

[ Upstream commit bf79167fd86f3b97390fe2e70231d383526bd9cc ]

Enabling CONFIG_STACKDEPOT results in the following build error.

arc-elf-ld: lib/stackdepot.o: in function `filter_irq_stacks':
stackdepot.c:(.text+0x456): undefined reference to `__irqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x456): undefined reference to `__irqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x476): undefined reference to `__irqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x476): undefined reference to `__irqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x484): undefined reference to `__softirqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x484): undefined reference to `__softirqentry_text_start'
arc-elf-ld: stackdepot.c:(.text+0x48c): undefined reference to `__softirqentry_text_end'
arc-elf-ld: stackdepot.c:(.text+0x48c): undefined reference to `__softirqentry_text_end'

Other architectures address this problem by adding IRQENTRY_TEXT and
SOFTIRQENTRY_TEXT to the text segment, so do the same here.

Signed-off-by: Guenter Roeck 
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARCv2: save ABI registers across signal handling

2021-06-30T12:48:54+00:00

commit 96f1b00138cb8f04c742c82d0a7c460b2202e887 upstream.

ARCv2 has some configuration dependent registers (r30, r58, r59) which
could be targetted by the compiler. To keep the ABI stable, these were
unconditionally part of the glibc ABI
(sysdeps/unix/sysv/linux/arc/sys/ucontext.h:mcontext_t) however we
missed populating them (by saving/restoring them across signal
handling).

This patch fixes the issue by
 - adding arcv2 ABI regs to kernel struct sigcontext
 - populating them during signal handling

Change to struct sigcontext might seem like a glibc ABI change (although
it primarily uses ucontext_t:mcontext_t) but the fact is
 - it has only been extended (existing fields are not touched)
 - the old sigcontext was ABI incomplete to begin with anyways

Fixes: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/53
Cc: 
Tested-by: kernel test robot 
Reported-by: Vladimir Isaev 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

ARC: entry: fix off-by-one error in syscall number validation

2021-05-22T08:57:39+00:00

commit 3433adc8bd09fc9f29b8baddf33b4ecd1ecd2cdc upstream.

We have NR_syscall syscalls from [0 .. NR_syscall-1].
However the check for invalid syscall number is "> NR_syscall" as
opposed to >=. This off-by-one error erronesously allows "NR_syscall"
to be treated as valid syscall causeing out-of-bounds access into
syscall-call table ensuing a crash (holes within syscall table have a
invalid-entry handler but this is beyond the array implementing the
table).

This problem showed up on v5.6 kernel when testing glibc 2.33 (v5.10
kernel capable, includng faccessat2 syscall 439). The v5.6 kernel has
NR_syscalls=439 (0 to 438). Due to the bug, 439 passed by glibc was
not handled as -ENOSYS but processed leading to a crash.

Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/48
Reported-by: Shahab Vahedi 
Cc: 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

arc: kernel: Return -EFAULT if copy_to_user() fails

2021-04-28T10:08:40+00:00

[ Upstream commit 46e152186cd89d940b26726fff11eb3f4935b45a ]

The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return -EFAULT if the copy doesn't complete.

Signed-off-by: Wang Qing 
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

arch/arc: add copy_user_page() to to fix build error on ARC

2021-01-23T14:48:42+00:00

[ Upstream commit 8a48c0a3360bf2bf4f40c980d0ec216e770e58ee ]

fs/dax.c uses copy_user_page() but ARC does not provide that interface,
resulting in a build error.

Provide copy_user_page() in .

../fs/dax.c: In function 'copy_cow_page_dax':
../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration]

Reported-by: kernel test robot 
Signed-off-by: Randy Dunlap 
Cc: Vineet Gupta 
Cc: linux-snps-arc@lists.infradead.org
Cc: Dan Williams 
#Acked-by: Vineet Gupta  # v1
Cc: Andrew Morton 
Cc: Matthew Wilcox 
Cc: Jan Kara 
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
#Reviewed-by: Ira Weiny  # v2
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARC: build: add boot_targets to PHONY

2021-01-23T14:48:41+00:00

[ Upstream commit 0cfccb3c04934cdef42ae26042139f16e805b5f7 ]

The top-level boot_targets (uImage and uImage.*) should be phony
targets. They just let Kbuild descend into arch/arc/boot/ and create
files there.

If a file exists in the top directory with the same name, the boot
image will not be created.

You can confirm it by the following steps:

  $ export CROSS_COMPILE=
  $ make -s ARCH=arc defconfig all   # vmlinux will be built
  $ touch uImage.gz
  $ make ARCH=arc uImage.gz
  CALL    scripts/atomic/check-atomics.sh
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  # arch/arc/boot/uImage.gz is not created

Specify the targets as PHONY to fix this.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin