commit feb92d7d3813456c11dce215b3421801a78a8986 upstream. Current code inadventely bails if hardware supports sampling/overflow interrupts, but the irq is missing from device tree. | | # perf stat -e cycles,instructions,major-faults,minor-faults ../hackbench | Running with 10 groups 400 process | Time: 0.921 | | Performance counter stats for '../hackbench': | | <not supported> cycles | <not supported> instructions | 0 major-faults | 8679 minor-faults This need not be as we can still do simple counting based perf stat. This unborks perf on HSDK-4xD Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00fdec98d9881bf5173af09aebd353ab3b9ac729 upstream. Trap handler for syscall tracing reads EFA (Exception Fault Address), in case strace wants PC of trap instruction (EFA is not part of pt_regs as of current code). However this EFA read is racy as it happens after dropping to pure kernel mode (re-enabling interrupts). A taken interrupt could context-switch, trigger a different task's trap, clobbering EFA for this execution context. Fix this by reading EFA early, before re-enabling interrupts. A slight side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler. The trap handler is common to both ARCompact and ARCv2 builds too. This just came out of code rework/review and no real problem was reported but is clearly a potential problem specially for strace. Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 43900edf67d7ef3ac8909854d75b8a1fba2d570c ] As of today the ICCM and DCCM size checks are incorrectly using mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in runtime and stored in cpu->dccm.sz and cpu->iccm.sz is in bytes. Fix that. Reported-by: Paul Greco <pmgreco@us.ibm.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
8-letter strings representing ARC perf events are stores in two 32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc. And the same order of bytes in the word is used regardless CPU endianness. Which means in case of big-endian CPU core we need to swap bytes to get the same order as if it was on little-endian CPU. Otherwise we're seeing the following error message on boot: ------------------------->8---------------------- ARC perf : 8 counters (32 bits), 40 conditions, [overflow IRQ support] sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 sysfs_warn_dup+0x46/0x58 sysfs_add_file_mode_ns+0xb2/0x168 create_files+0x70/0x2a0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0 Failed to register pmu: arc_pct, reason -17 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 __warn+0x9c/0xd4 warn_slowpath_fmt+0x22/0x2c perf_event_sysfs_init+0x70/0xa0 ---[ end trace a75fb9a9837bd1ec ]--- ------------------------->8---------------------- What happens here we're trying to register more than one raw perf event with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters and encoded into two 32-bit words. In this particular case we deal with 2 events: * "IJMP____" which counts all jump & branch instructions * "IJMPC___" which counts only conditional jumps & branches Those strings are split in two 32-bit words this way "IJMP" + "____" & "IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core being big-endian then we read "PMJI" + "____" & "PMJI" + "___C". And since we interpret read array of ASCII letters as a null-terminated string on big-endian CPU we end up with 2 events of the same name "PMJI". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Pull fallthrough fixes from Gustavo A. R. Silva: "Fix fall-through warnings on arc and nds32 for multiple configurations" * tag 'Wimplicit-fallthrough-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: nds32: Mark expected switch fall-throughs ARC: unwind: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: haps_hs_defconfig arc):
arch/arc/kernel/unwind.c: In function ‘read_pointer’:
./include/linux/compiler.h:328:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
do { \
^
./include/linux/compiler.h:338:2: note: in expansion of macro ‘__compiletime_assert’
__compiletime_assert(condition, msg, prefix, suffix)
^~~~~~~~~~~~~~~~~~~~
./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
^~~~~~~~~~~~~~~~
arch/arc/kernel/unwind.c:573:3: note: in expansion of macro ‘BUILD_BUG_ON’
BUILD_BUG_ON(sizeof(u32) != sizeof(value));
^~~~~~~~~~~~
arch/arc/kernel/unwind.c:575:2: note: here
case DW_EH_PE_native:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
This adds support for an optional extra interrupt cell to specify edge vs level triggered. It is backward compatible with dts files with only one cell, and will default to level-triggered in such a case. Note that I had to make a change to idu_irq_set_affinity as well, as this function was setting the interrupt type to "level" unconditionally, since this was the only type supported previously. Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com> Reviewed-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: haps_hs_defconfig arc): arch/arc/kernel/unwind.c:827:20: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/arc/kernel/unwind.c:836:20: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Pull ARC updates from Vineet Gupta: - long due rewrite of do_page_fault - refactoring of entry/exit code to utilize the double load/store instructions - hsdk platform updates * tag 'arc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Enable AXI DW DMAC in defconfig ARC: [plat-hsdk]: enable DW SPI controller ARC: hide unused function unw_hdr_alloc ARC: [haps] Add Virtio support ARCv2: entry: simplify return to Delay Slot via interrupt ARC: entry: EV_Trap expects r10 (vs. r9) to have exception cause ARCv2: entry: rewrite to enable use of double load/stores LDD/STD ARCv2: entry: avoid a branch ARCv2: entry: push out the Z flag unclobber from common EXCEPTION_PROLOGUE ARCv2: entry: comments about hardware auto-save on taken interrupts ARC: mm: do_page_fault refactor #8: release mmap_sem sooner ARC: mm: do_page_fault refactor #7: fold the various error handling ARC: mm: do_page_fault refactor #6: error handlers to use same pattern ARC: mm: do_page_fault refactor #5: scoot no_context to end ARC: mm: do_page_fault refactor #4: consolidate retry related logic ARC: mm: do_page_fault refactor #3: tidyup vma access permission code ARC: mm: do_page_fault refactor #2: remove short lived variable ARC: mm: do_page_fault refactor #1: remove label @good_area
Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...