linux-stable.git/arch/arc/include, branch v4.14.331

arc: iounmap() arg is volatile

2022-11-03T14:50:54+00:00

[ Upstream commit c44f15c1c09481d50fd33478ebb5b8284f8f5edb ]

Add 'volatile' to iounmap()'s argument to prevent build warnings.
This make it the same as other major architectures.

Placates these warnings: (12 such warnings)

../drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':
../drivers/video/fbdev/riva/fbdev.c:2067:42: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Werror=discarded-qualifiers]
 2067 |                 iounmap(default_par->riva.PRAMIN);

Fixes: 1162b0701b14b ("ARC: I/O and DMA Mappings")
Signed-off-by: Randy Dunlap 
Cc: Vineet Gupta 
Cc: linux-snps-arc@lists.infradead.org
Cc: Arnd Bergmann 
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

2021-11-12T13:28:22+00:00

[ Upstream commit cef397038167ac15d085914493d6c86385773709 ]

Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : []    lr : []    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.

I looked up the possible number of bits in source code and
datasheets, here is what I found:

 - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
 - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
   support more than 32 bits, even though supersections in theory allow
   up to 40 bits as well.
 - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
   XPA supports up to 60 bits in theory, but 40 bits are more than
   anyone will ever ship
 - On PowerPC, there are three different implementations of 36 bit
   addressing, but 32-bit is used without CONFIG_PTE_64BIT
 - On RISC-V, the normal page table format can support 34 bit
   addressing. There is no highmem support on RISC-V, so anything
   above 2GB is unused, but it might be useful to eventually support
   CONFIG_ZRAM for high pages.

Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer 
Reviewed-by: Stefan Agner 
Tested-by: Stefan Agner 
Acked-by: Mike Rapoport 
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann 
Signed-off-by: Sasha Levin 
[florian: patch arch/powerpc/include/asm/pte-common.h for 4.14.y
removed arch/riscv/include/asm/pgtable.h which does not exist]
Signed-off-by: Florian Fainelli 
Signed-off-by: Greg Kroah-Hartman

ARCv2: save ABI registers across signal handling

2021-06-30T12:48:54+00:00

commit 96f1b00138cb8f04c742c82d0a7c460b2202e887 upstream.

ARCv2 has some configuration dependent registers (r30, r58, r59) which
could be targetted by the compiler. To keep the ABI stable, these were
unconditionally part of the glibc ABI
(sysdeps/unix/sysv/linux/arc/sys/ucontext.h:mcontext_t) however we
missed populating them (by saving/restoring them across signal
handling).

This patch fixes the issue by
 - adding arcv2 ABI regs to kernel struct sigcontext
 - populating them during signal handling

Change to struct sigcontext might seem like a glibc ABI change (although
it primarily uses ucontext_t:mcontext_t) but the fact is
 - it has only been extended (existing fields are not touched)
 - the old sigcontext was ABI incomplete to begin with anyways

Fixes: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/53
Cc: 
Tested-by: kernel test robot 
Reported-by: Vladimir Isaev 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

arch/arc: add copy_user_page() to to fix build error on ARC

2021-01-23T14:48:42+00:00

[ Upstream commit 8a48c0a3360bf2bf4f40c980d0ec216e770e58ee ]

fs/dax.c uses copy_user_page() but ARC does not provide that interface,
resulting in a build error.

Provide copy_user_page() in .

../fs/dax.c: In function 'copy_cow_page_dax':
../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration]

Reported-by: kernel test robot 
Signed-off-by: Randy Dunlap 
Cc: Vineet Gupta 
Cc: linux-snps-arc@lists.infradead.org
Cc: Dan Williams 
#Acked-by: Vineet Gupta  # v1
Cc: Andrew Morton 
Cc: Matthew Wilcox 
Cc: Jan Kara 
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
#Reviewed-by: Ira Weiny  # v2
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARC: elf: use right ELF_ARCH

2020-07-22T07:22:19+00:00

commit b7faf971081a4e56147f082234bfff55135305cb upstream.

Cc: 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

ARC: define __ALIGN_STR and __ALIGN symbols for ARC

2020-03-20T09:54:17+00:00

commit 8d92e992a785f35d23f845206cf8c6cafbc264e0 upstream.

The default defintions use fill pattern 0x90 for padding which for ARC
generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090

So use ".align 4" which insert a "nop_s" instruction instead.

Cc: stable@vger.kernel.org
Acked-by: Vineet Gupta 
Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

ARC: fix build warnings

2019-06-25T03:36:51+00:00

[ Upstream commit 89c92142f75eb80064f5b9f1111484b1b4d81790 ]

| arch/arc/mm/tlb.c:914:2: warning: variable length array 'pd0' is used [-Wvla]
| arch/arc/include/asm/cmpxchg.h:95:29: warning: value computed is not used [-Wunused-value]

Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARCv2: support manual regfile save on interrupts

2019-03-23T13:35:16+00:00

[ Upstream commit e494239a007e601448110ac304fe055951f9de3b ]

There's a hardware bug which affects the HSDK platform, triggered by
micro-ops for auto-saving regfile on taken interrupt. The workaround is
to inhibit autosave.

Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARC: uacces: remove lp_start, lp_end from clobber list

2019-03-23T13:35:16+00:00

[ Upstream commit d5e3c55e01d8b1774b37b4647c30fb22f1d39077 ]

Newer ARC gcc handles lp_start, lp_end in a different way and doesn't
like them in the clobber list.

Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin

ARC: fix __ffs return value to avoid build warnings

2019-03-05T16:57:59+00:00

[ Upstream commit 4e868f8419cb4cb558c5d428e7ab5629cef864c7 ]

|  CC      mm/nobootmem.o
|In file included from ./include/asm-generic/bug.h:18:0,
|                 from ./arch/arc/include/asm/bug.h:32,
|                 from ./include/linux/bug.h:5,
|                 from ./include/linux/mmdebug.h:5,
|                 from ./include/linux/gfp.h:5,
|                 from ./include/linux/slab.h:15,
|                 from mm/nobootmem.c:14:
|mm/nobootmem.c: In function '__free_pages_memory':
|./include/linux/kernel.h:845:29: warning: comparison of distinct pointer types lacks a cast
|   (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
|                             ^
|./include/linux/kernel.h:859:4: note: in expansion of macro '__typecheck'
|   (__typecheck(x, y) && __no_side_effects(x, y))
|    ^~~~~~~~~~~
|./include/linux/kernel.h:869:24: note: in expansion of macro '__safe_cmp'
|  __builtin_choose_expr(__safe_cmp(x, y), \
|                        ^~~~~~~~~~
|./include/linux/kernel.h:878:19: note: in expansion of macro '__careful_cmp'
| #define min(x, y) __careful_cmp(x, y, <)
|                   ^~~~~~~~~~~~~
|mm/nobootmem.c:104:11: note: in expansion of macro 'min'
|   order = min(MAX_ORDER - 1UL, __ffs(start));

Change __ffs return value from 'int' to 'unsigned long' as it
is done in other implementations (like asm-generic, x86, etc...)
to avoid build-time warnings in places where type is strictly
checked.

As __ffs may return values in [0-31] interval changing return
type to unsigned is valid.

Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Vineet Gupta 
Signed-off-by: Sasha Levin