<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/arch/alpha, branch v3.5.7</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>alpha: Add missing RCU idle APIs on idle loop</title>
<updated>2012-10-12T20:47:19+00:00</updated>
<author>
<name>Frederic Weisbecker</name>
<email>fweisbec@gmail.com</email>
</author>
<published>2012-08-22T15:27:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e5d9e90a357ea2c51ada251532eb931bd20c4153'/>
<id>e5d9e90a357ea2c51ada251532eb931bd20c4153</id>
<content type='text'>
commit 4c94cada48f7c660eca582be6032427a5e367117 upstream.

In the old times, the whole idle task was considered
as an RCU quiescent state. But as RCU became more and
more successful overtime, some RCU read side critical
section have been added even in the code of some
architectures idle tasks, for tracing for example.

So nowadays, rcu_idle_enter() and rcu_idle_exit() must
be called by the architecture to tell RCU about the part
in the idle loop that doesn't make use of rcu read side
critical sections, typically the part that puts the CPU
in low power mode.

This is necessary for RCU to find the quiescent states in
idle in order to complete grace periods.

Add this missing pair of calls in the Alpha's idle loop.

Reported-by: Paul E. McKenney &lt;paulmck@linux.vnet.ibm.com&gt;
Signed-off-by: Frederic Weisbecker &lt;fweisbec@gmail.com&gt;
Tested-by: Michael Cree &lt;mcree@orcon.net.nz&gt;
Cc: Richard Henderson &lt;rth@twiddle.net&gt;
Cc: Ivan Kokshaysky &lt;ink@jurassic.park.msu.ru&gt;
Cc: Matt Turner &lt;mattst88@gmail.com&gt;
Cc: alpha &lt;linux-alpha@vger.kernel.org&gt;
Cc: Paul E. McKenney &lt;paulmck@linux.vnet.ibm.com&gt;
Reviewed-by: Josh Triplett &lt;josh@joshtriplett.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 4c94cada48f7c660eca582be6032427a5e367117 upstream.

In the old times, the whole idle task was considered
as an RCU quiescent state. But as RCU became more and
more successful overtime, some RCU read side critical
section have been added even in the code of some
architectures idle tasks, for tracing for example.

So nowadays, rcu_idle_enter() and rcu_idle_exit() must
be called by the architecture to tell RCU about the part
in the idle loop that doesn't make use of rcu read side
critical sections, typically the part that puts the CPU
in low power mode.

This is necessary for RCU to find the quiescent states in
idle in order to complete grace periods.

Add this missing pair of calls in the Alpha's idle loop.

Reported-by: Paul E. McKenney &lt;paulmck@linux.vnet.ibm.com&gt;
Signed-off-by: Frederic Weisbecker &lt;fweisbec@gmail.com&gt;
Tested-by: Michael Cree &lt;mcree@orcon.net.nz&gt;
Cc: Richard Henderson &lt;rth@twiddle.net&gt;
Cc: Ivan Kokshaysky &lt;ink@jurassic.park.msu.ru&gt;
Cc: Matt Turner &lt;mattst88@gmail.com&gt;
Cc: alpha &lt;linux-alpha@vger.kernel.org&gt;
Cc: Paul E. McKenney &lt;paulmck@linux.vnet.ibm.com&gt;
Reviewed-by: Josh Triplett &lt;josh@joshtriplett.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts</title>
<updated>2012-10-02T17:39:10+00:00</updated>
<author>
<name>Mel Gorman</name>
<email>mgorman@suse.de</email>
</author>
<published>2012-08-19T02:41:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=99c9bffe490072ec4a1b72bc7ca7c6c7048e2c9b'/>
<id>99c9bffe490072ec4a1b72bc7ca7c6c7048e2c9b</id>
<content type='text'>
commit 67a806d9499353fabd5b5ff07337f3aa88a1c3ba upstream.

The following build error occurred during an alpha build:

  net/core/sock.c:274:36: error: initializer element is not constant

Dave Anglin says:
&gt; Here is the line in sock.i:
&gt;
&gt; struct static_key memalloc_socks = ((struct static_key) { .enabled =
&gt; ((atomic_t) { (0) }) });

The above line contains two compound literals.  It also uses a designated
initializer to initialize the field enabled.  A compound literal is not a
constant expression.

The location of the above statement isn't fully clear, but if a compound
literal occurs outside the body of a function, the initializer list must
consist of constant expressions.

Signed-off-by: Mel Gorman &lt;mgorman@suse.de&gt;
Signed-off-by: Fengguang Wu &lt;fengguang.wu@intel.com&gt;
Signed-off-by: Michael Cree &lt;mcree@orcon.net.nz&gt;
Acked-by: Matt Turner &lt;mattst88@gmail.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 67a806d9499353fabd5b5ff07337f3aa88a1c3ba upstream.

The following build error occurred during an alpha build:

  net/core/sock.c:274:36: error: initializer element is not constant

Dave Anglin says:
&gt; Here is the line in sock.i:
&gt;
&gt; struct static_key memalloc_socks = ((struct static_key) { .enabled =
&gt; ((atomic_t) { (0) }) });

The above line contains two compound literals.  It also uses a designated
initializer to initialize the field enabled.  A compound literal is not a
constant expression.

The location of the above statement isn't fully clear, but if a compound
literal occurs outside the body of a function, the initializer list must
consist of constant expressions.

Signed-off-by: Mel Gorman &lt;mgorman@suse.de&gt;
Signed-off-by: Fengguang Wu &lt;fengguang.wu@intel.com&gt;
Signed-off-by: Michael Cree &lt;mcree@orcon.net.nz&gt;
Acked-by: Matt Turner &lt;mattst88@gmail.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>alpha: Don't export SOCK_NONBLOCK to user space.</title>
<updated>2012-09-14T16:59:24+00:00</updated>
<author>
<name>Michael Cree</name>
<email>mcree@orcon.net.nz</email>
</author>
<published>2012-08-19T02:40:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6a09f9b5bf2061f23350625c42e9ad4792e1d483'/>
<id>6a09f9b5bf2061f23350625c42e9ad4792e1d483</id>
<content type='text'>
commit a2fa3ccd7b43665fe14cb562761a6c3d26a1d13f upstream.

Currently we export SOCK_NONBLOCK to user space but that conflicts with
the definition from glibc leading to compilation errors in user programs
(e.g.  see Debian bug #658460).

The generic socket.h restricts the definition of SOCK_NONBLOCK to the
kernel, as does the MIPS specific socket.h, so let's do the same on
Alpha.

Signed-off-by: Michael Cree &lt;mcree@orcon.net.nz&gt;
Acked-by: Matt Turner &lt;mattst88@gmail.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a2fa3ccd7b43665fe14cb562761a6c3d26a1d13f upstream.

Currently we export SOCK_NONBLOCK to user space but that conflicts with
the definition from glibc leading to compilation errors in user programs
(e.g.  see Debian bug #658460).

The generic socket.h restricts the definition of SOCK_NONBLOCK to the
kernel, as does the MIPS specific socket.h, so let's do the same on
Alpha.

Signed-off-by: Michael Cree &lt;mcree@orcon.net.nz&gt;
Acked-by: Matt Turner &lt;mattst88@gmail.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>alpha: fix fpu.h usage in userspace</title>
<updated>2012-09-14T16:59:23+00:00</updated>
<author>
<name>Mike Frysinger</name>
<email>vapier@gentoo.org</email>
</author>
<published>2012-08-19T02:41:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=20b223443ed020f873f05d68342e3acec70f8100'/>
<id>20b223443ed020f873f05d68342e3acec70f8100</id>
<content type='text'>
commit 0be421862b857e61964435ffcaa7499cf77a5e5a upstream.

After commit ec2212088c42 ("Disintegrate asm/system.h for Alpha"), the
fpu.h header which we install for userland started depending on
special_insns.h which is not installed.

However, fpu.h only uses that for __KERNEL__ code, so protect the
inclusion the same way to avoid build breakage in glibc:

  /usr/include/asm/fpu.h:4:31: fatal error: asm/special_insns.h: No such file or directory

Reported-by: Matt Turner &lt;mattst88@gentoo.org&gt;
Signed-off-by: Mike Frysinger &lt;vapier@gentoo.org&gt;
Signed-off-by: Michael Cree &lt;mcree@orcon.net.nz&gt;
Acked-by: Matt Turner &lt;mattst88@gmail.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0be421862b857e61964435ffcaa7499cf77a5e5a upstream.

After commit ec2212088c42 ("Disintegrate asm/system.h for Alpha"), the
fpu.h header which we install for userland started depending on
special_insns.h which is not installed.

However, fpu.h only uses that for __KERNEL__ code, so protect the
inclusion the same way to avoid build breakage in glibc:

  /usr/include/asm/fpu.h:4:31: fatal error: asm/special_insns.h: No such file or directory

Reported-by: Matt Turner &lt;mattst88@gentoo.org&gt;
Signed-off-by: Mike Frysinger &lt;vapier@gentoo.org&gt;
Signed-off-by: Michael Cree &lt;mcree@orcon.net.nz&gt;
Acked-by: Matt Turner &lt;mattst88@gmail.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal</title>
<updated>2012-06-01T18:53:44+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-06-01T18:53:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=86c47b70f62a7072d441ba212aab33c2f82627c2'/>
<id>86c47b70f62a7072d441ba212aab33c2f82627c2</id>
<content type='text'>
Pull third pile of signal handling patches from Al Viro:
 "This time it's mostly helpers and conversions to them; there's a lot
  of stuff remaining in the tree, but that'll either go in -rc2
  (isolated bug fixes, ideally via arch maintainers' trees) or will sit
  there until the next cycle."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  x86: get rid of calling do_notify_resume() when returning to kernel mode
  blackfin: check __get_user() return value
  whack-a-mole with TIF_FREEZE
  FRV: Optimise the system call exit path in entry.S [ver #2]
  FRV: Shrink TIF_WORK_MASK [ver #2]
  FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions
  new helper: signal_delivered()
  powerpc: get rid of restore_sigmask()
  most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
  set_restore_sigmask() is never called without SIGPENDING (and never should be)
  TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set
  don't call try_to_freeze() from do_signal()
  pull clearing RESTORE_SIGMASK into block_sigmask()
  sh64: failure to build sigframe != signal without handler
  openrisc: tracehook_signal_handler() is supposed to be called on success
  new helper: sigmask_to_save()
  new helper: restore_saved_sigmask()
  new helpers: {clear,test,test_and_clear}_restore_sigmask()
  HAVE_RESTORE_SIGMASK is defined on all architectures now
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull third pile of signal handling patches from Al Viro:
 "This time it's mostly helpers and conversions to them; there's a lot
  of stuff remaining in the tree, but that'll either go in -rc2
  (isolated bug fixes, ideally via arch maintainers' trees) or will sit
  there until the next cycle."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  x86: get rid of calling do_notify_resume() when returning to kernel mode
  blackfin: check __get_user() return value
  whack-a-mole with TIF_FREEZE
  FRV: Optimise the system call exit path in entry.S [ver #2]
  FRV: Shrink TIF_WORK_MASK [ver #2]
  FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions
  new helper: signal_delivered()
  powerpc: get rid of restore_sigmask()
  most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
  set_restore_sigmask() is never called without SIGPENDING (and never should be)
  TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set
  don't call try_to_freeze() from do_signal()
  pull clearing RESTORE_SIGMASK into block_sigmask()
  sh64: failure to build sigframe != signal without handler
  openrisc: tracehook_signal_handler() is supposed to be called on success
  new helper: sigmask_to_save()
  new helper: restore_saved_sigmask()
  new helpers: {clear,test,test_and_clear}_restore_sigmask()
  HAVE_RESTORE_SIGMASK is defined on all architectures now
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs</title>
<updated>2012-06-01T17:34:35+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-06-01T17:34:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1193755ac6328ad240ba987e6ec41d5e8baf0680'/>
<id>1193755ac6328ad240ba987e6ec41d5e8baf0680</id>
<content type='text'>
Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     -&gt;d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * -&gt;encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's -&gt;s_dirty work (jff2 and reiserfs parts)
   * -&gt;update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in -&gt;d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use -&gt;update_time
  fs: introduce inode operation -&gt;update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     -&gt;d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * -&gt;encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's -&gt;s_dirty work (jff2 and reiserfs parts)
   * -&gt;update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in -&gt;d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use -&gt;update_time
  fs: introduce inode operation -&gt;update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>new helper: signal_delivered()</title>
<updated>2012-06-01T16:58:52+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2012-04-28T06:04:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=efee984c27b67e3ebef40410f35671997441b57c'/>
<id>efee984c27b67e3ebef40410f35671997441b57c</id>
<content type='text'>
Does block_sigmask() + tracehook_signal_handler();  called when
sigframe has been successfully built.  All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Does block_sigmask() + tracehook_signal_handler();  called when
sigframe has been successfully built.  All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set</title>
<updated>2012-06-01T16:58:51+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2012-04-27T17:58:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=77097ae503b170120ab66dd1d547f8577193f91f'/>
<id>77097ae503b170120ab66dd1d547f8577193f91f</id>
<content type='text'>
Only 3 out of 63 do not.  Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Only 3 out of 63 do not.  Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pull clearing RESTORE_SIGMASK into block_sigmask()</title>
<updated>2012-06-01T16:58:49+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2012-05-22T03:42:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a610d6e672d6d3723e8da257ad4a8a288a8f2f89'/>
<id>a610d6e672d6d3723e8da257ad4a8a288a8f2f89</id>
<content type='text'>
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>new helper: sigmask_to_save()</title>
<updated>2012-06-01T16:58:48+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2012-05-02T13:59:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b7f9a11a6cf1ea9ee6be3eb2b90d91327a09ad14'/>
<id>b7f9a11a6cf1ea9ee6be3eb2b90d91327a09ad14</id>
<content type='text'>
replace boilerplate "should we use -&gt;saved_sigmask or -&gt;blocked?"
with calls of obvious inlined helper...

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
replace boilerplate "should we use -&gt;saved_sigmask or -&gt;blocked?"
with calls of obvious inlined helper...

Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
</feed>
