timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of serial and tty driver updates for 6.15-rc1.
  Include in here are the following:

   - more great tty layer cleanups from Jiri. Someday this will be done,
     but that's not going to be any year soon...

   - kdb debug driver reverts to fix a reported issue

   - lots of .dts binding updates for different devices with serial
     devices

   - lots of tiny updates and tweaks and a few bugfixes for different
     serial drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
  serial: stm32: do not deassert RS485 RTS GPIO prematurely
  serial: 8250: add driver for NI UARTs
  dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
  serial: icom: fix code format problems
  serial: sh-sci: Save and restore more registers
  tty: serial: pl011: remove incorrect of_match_ptr annotation
  dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
  tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
  tty: caif: removed unused function debugfs_tx()
  serial: 8250_dma: terminate correct DMA in tx_dma_flush()
  tty: serial: fsl_lpuart: rename register variables more specifically
  tty: serial: fsl_lpuart: use port struct directly to simply code
  tty: serial: fsl_lpuart: Use u32 and u8 for register variables
  tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
  tty: serial: 8250: Add Brainboxes XC devices
  dt-bindings: serial: fsl-lpuart: support i.MX94
  tty: serial: 8250: Add some more device IDs
  dt-bindings: serial: samsung: add exynos7870-uart compatible
  serial: 8250_dw: Comment possible corner cases in serial_out() implementation
  ...

Pull vfs mount updates from Christian Brauner:

 - Mount notifications

   The day has come where we finally provide a new api to listen for
   mount topology changes outside of /proc/<pid>/mountinfo. A mount
   namespace file descriptor can be supplied and registered with
   fanotify to listen for mount topology changes.

   Currently notifications for mount, umount and moving mounts are
   generated. The generated notification record contains the unique
   mount id of the mount.

   The listmount() and statmount() api can be used to query detailed
   information about the mount using the received unique mount id.

   This allows userspace to figure out exactly how the mount topology
   changed without having to generating diffs of /proc/<pid>/mountinfo
   in userspace.

 - Support O_PATH file descriptors with FSCONFIG_SET_FD in the new mount
   api

 - Support detached mounts in overlayfs

   Since last cycle we support specifying overlayfs layers via file
   descriptors. However, we don't allow detached mounts which means
   userspace cannot user file descriptors received via
   open_tree(OPEN_TREE_CLONE) and fsmount() directly. They have to
   attach them to a mount namespace via move_mount() first.

   This is cumbersome and means they have to undo mounts via umount().
   Allow them to directly use detached mounts.

 - Allow to retrieve idmappings with statmount

   Currently it isn't possible to figure out what idmapping has been
   attached to an idmapped mount. Add an extension to statmount() which
   allows to read the idmapping from the mount.

 - Allow creating idmapped mounts from mounts that are already idmapped

   So far it isn't possible to allow the creation of idmapped mounts
   from already idmapped mounts as this has significant lifetime
   implications. Make the creation of idmapped mounts atomic by allow to
   pass struct mount_attr together with the open_tree_attr() system call
   allowing to solve these issues without complicating VFS lookup in any
   way.

   The system call has in general the benefit that creating a detached
   mount and applying mount attributes to it becomes an atomic operation
   for userspace.

 - Add a way to query statmount() for supported options

   Allow userspace to query which mount information can be retrieved
   through statmount().

 - Allow superblock owners to force unmount

* tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
  umount: Allow superblock owners to force umount
  selftests: add tests for mount notification
  selinux: add FILE__WATCH_MOUNTNS
  samples/vfs: fix printf format string for size_t
  fs: allow changing idmappings
  fs: add kflags member to struct mount_kattr
  fs: add open_tree_attr()
  fs: add copy_mount_setattr() helper
  fs: add vfs_open_tree() helper
  statmount: add a new supported_mask field
  samples/vfs: add STATMOUNT_MNT_{G,U}IDMAP
  selftests: add tests for using detached mount with overlayfs
  samples/vfs: check whether flag was raised
  statmount: allow to retrieve idmappings
  uidgid: add map_id_range_up()
  fs: allow detached mounts in clone_private_mount()
  selftests/overlayfs: test specifying layers as O_PATH file descriptors
  fs: support O_PATH fds with FSCONFIG_SET_FD
  vfs: add notifications for mount attach and detach
  fanotify: notify on mount attach and detach
  ...

The value returned from srmcons_init() was -ENODEV for over 2 decades.
But it does not matter, given device_initcall() ignores retvals.

But to be honest, return 0 in case the tty driver was registered
properly.

To do that, the condition is inverted and a short path taken in case of
error.

err_free_drv is introduced as it will be used from more places later.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-alpha@vger.kernel.org
Link: https://lore.kernel.org/r/20250317070046.24386-22-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove hard-coded strings by using the str_yes_no() helper function.

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Matt Turner <mattst88@gmail.com>

do_page_fault() and do_entUna() are special because they use
non-standard stack frame layout. Fix them manually.

Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ivan Kokshaysky <ink@unseen.parts>
Signed-off-by: Matt Turner <mattst88@gmail.com>

This allows the assembly in entry.S to automatically keep in sync with
changes in the stack layout (struct pt_regs and struct switch_stack).

Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ivan Kokshaysky <ink@unseen.parts>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Add open_tree_attr() which allow to atomically create a detached mount
tree and set mount options on it. If OPEN_TREE_CLONE is used this will
allow the creation of a detached mount with a new set of mount options
without it ever being exposed to userspace without that set of mount
options applied.

Link: https://lore.kernel.org/r/20250128-work-mnt_idmap-update-v2-v1-3-c25feb0d2eb3@kernel.org
Reviewed-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull execve fix from Kees Cook:
 "This is an alpha-specific fix, but since it touched ELF I was asked to
  carry it.

   - alpha/elf: Fix misc/setarch test of util-linux by removing 32bit
     support (Eric W. Biederman)"

* tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support

Richard Henderson <richard.henderson@linaro.org> writes[1]:

> There was a Spec benchmark (I forget which) which was memory bound and ran
> twice as fast with 32-bit pointers.
>
> I copied the idea from DEC to the ELF abi, but never did all the other work
> to allow the toolchain to take advantage.
>
> Amusingly, a later Spec changed the benchmark data sets to not fit into a
> 32-bit address space, specifically because of this.
>
> I expect one could delete the ELF bit and personality and no one would
> notice. Not even the 10 remaining Alpha users.

In [2] it was pointed out that parts of setarch weren't working
properly on alpha because it has it's own SET_PERSONALITY
implementation.  In the discussion that followed Richard Henderson
pointed out that the 32bit pointer support for alpha was never
completed.

Fix this by removing alpha's 32bit pointer support.

As a bit of paranoia refuse to execute any alpha binaries that have
the EF_ALPHA_32BIT flag set.  Just in case someone somewhere has
binaries that try to use alpha's 32bit pointer support.

Link: https://lkml.kernel.org/r/CAFXwXrkgu=4Qn-v1PjnOR4SG0oUb9LSa0g6QXpBq4ttm52pJOQ@mail.gmail.com [1]
Link: https://lkml.kernel.org/r/20250103140148.370368-1-glaubitz@physik.fu-berlin.de [2]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/87y0zfs26i.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: Kees Cook <kees@kernel.org>