linux-stable.git/arch/alpha/kernel/traps.c, branch linux-5.4.y

alpha: align stack for page fault and user unaligned trap handlers

2025-03-13T11:43:16+00:00

commit 3b35a171060f846b08b48646b38c30b5d57d17ff upstream.

do_page_fault() and do_entUna() are special because they use
non-standard stack frame layout. Fix them manually.

Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki 
Tested-by: Magnus Lindholm 
Tested-by: Matt Turner 
Reviewed-by: Maciej W. Rozycki 
Suggested-by: Maciej W. Rozycki 
Signed-off-by: Ivan Kokshaysky 
Signed-off-by: Matt Turner 
Signed-off-by: Greg Kroah-Hartman

alpha: fix FEN fault handling

2023-03-11T15:44:04+00:00

commit 977a3009547dad4a5bc95d91be4a58c9f7eedac0 upstream.

Type 3 instruction fault (FPU insn with FPU disabled) is handled
by quietly enabling FPU and returning.  Which is fine, except that
we need to do that both for fault in userland and in the kernel;
the latter *can* legitimately happen - all it takes is this:

.global _start
_start:
        call_pal 0xae
	lda $0, 0
	ldq $0, 0($0)

- call_pal CLRFEN to clear "FPU enabled" flag and arrange for
a signal delivery (SIGSEGV in this case).

Fixed by moving the handling of type 3 into the common part of
do_entIF(), before we check for kernel vs. user mode.

Incidentally, the check for kernel mode is unidiomatic; the normal
way to do that is !user_mode(regs).  The difference is that
the open-coded variant treats any of bits 63..3 of regs->ps being
set as "it's user mode" while the normal approach is to check just
the bit 3.  PS is a 4-bit register and regs->ps always will have
bits 63..4 clear, so the open-coded variant here is actually equivalent
to !user_mode(regs).  Harder to follow, though...

Cc: stable@vger.kernel.org
Reviewed-by: Richard Henderson 
Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

exit: Add and use make_task_dead.

2023-02-06T06:52:49+00:00

commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream.

There are two big uses of do_exit.  The first is it's design use to be
the guts of the exit(2) system call.  The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.

Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure.  In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.

Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.

As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Eric Biggers 
Signed-off-by: Sasha Levin

signal: Remove the task parameter from force_sig_fault

2019-05-29T14:31:43+00:00

As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.

The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.

The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:

force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)

Signed-off-by: "Eric W. Biederman"

signal/alpha: Use force_sig_fault where appropriate

2018-04-25T15:40:59+00:00

Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.

Simplify this process by using the helper force_sig_fault.  Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.

In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.

Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: linux-alpha@vger.kernel.org
Signed-off-by: "Eric W. Biederman"

signal/alpha: Use send_sig_fault where appropriate

2018-04-25T15:40:58+00:00

Filling in struct siginfo before calling send_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.

Simplify this process by using the helper send_sig_fault.  Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls send_sig_info.

In short about a 5 line reduction in code for every time send_sig_info
is called, which makes the calling function clearer.

Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: linux-alpha@vger.kernel.org
Signed-off-by: "Eric W. Biederman"

signal/alpha: Replace TRAP_FIXME with TRAP_UNK

2018-04-25T15:40:57+00:00

Using an si_code of 0 that aliases with SI_USER is clearly the wrong
thing to do, and causes problems in interesting ways.

For it really is not clear to me if using TRAP_UNK bugcheck or
the default case of gentrap is really the best way to handle
things.  There is certainly enough information that that a more
specific si_code could potentially be used.  That said TRAP_UNK
is definitely an improvement over 0 as it removes the ambiguiuty
of what si_code of 0 with SIGTRAP means on alpha.

Recent history suggests no actually cares about crazy corner cases of
the kernel behavior like this so I don't expect any regressions from
changing this.  However if something does happen this change is easy
to revert.

Cc: Helge Deller 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: linux-alpha@vger.kernel.org
Fixes: 0a635c7a84cf ("Fill in siginfo_t.")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman"

signal/alpha: Replace FPE_FIXME with FPE_FLTUNK

2018-04-25T15:40:54+00:00

Using an si_code of 0 that aliases with SI_USER is clearly the wrong
thing todo, and causes problems in interesting ways.

The newly defined FPE_FLTUNK semantically appears to fit the bill so
use it instead.

Given recent experience in this area odds are it will not break
anything.  Fixing it removes a hazard to kernel maintenance.

Cc: Helge Deller 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: linux-alpha@vger.kernel.org
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: 0a635c7a84cf ("Fill in siginfo_t.")
Signed-off-by: "Eric W. Biederman"

signal: Ensure every siginfo we send has all bits initialized

2018-04-25T15:40:51+00:00

Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.

Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.

The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.

In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.

Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.

Signed-off-by: "Eric W. Biederman"

alpha: fix formating of stack content

2018-01-21T01:01:13+00:00

Since version 4.9, the kernel automatically breaks printk calls into
multiple newlines unless pr_cont is used. Fix the alpha stacktrace code,
so that it prints stack trace in four columns, as it was initially
intended.

Signed-off-by: Mikulas Patocka 
Cc: stable@vger.kernel.org	# v4.9+
Signed-off-by: Matt Turner