Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth and IPsec.

  The bridge patch is actually a follow-up to a recent fix in the same
  area. We have a pending v6.8 AF_UNIX regression; it should be solved
  soon, but not in time for this PR.

  Current release - regressions:

   - eth: ks8851: Queue RX packets in IRQ handler instead of disabling
     BHs

   - net: bridge: fix corrupted ethernet header on multicast-to-unicast

  Current release - new code bugs:

   - xfrm: fix possible bad pointer derferencing in error path

  Previous releases - regressionis:

   - core: fix out-of-bounds access in ops_init

   - ipv6:
      - fix potential uninit-value access in __ip6_make_skb()
      - fib6_rules: avoid possible NULL dereference in fib6_rule_action()

   - tcp: use refcount_inc_not_zero() in tcp_twsk_unique().

   - rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation

   - rxrpc: fix congestion control algorithm

   - bluetooth:
      - l2cap: fix slab-use-after-free in l2cap_connect()
      - msft: fix slab-use-after-free in msft_do_close()

   - eth: hns3: fix kernel crash when devlink reload during
     initialization

   - eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
     family

  Previous releases - always broken:

   - xfrm: preserve vlan tags for transport mode software GRO

   - tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets

   - eth: hns3: keep using user config after hardware reset"

* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
  net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
  net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
  net: hns3: fix kernel crash when devlink reload during initialization
  net: hns3: fix port vlan filter not disabled issue
  net: hns3: use appropriate barrier function after setting a bit value
  net: hns3: release PTP resources if pf initialization failed
  net: hns3: change type of numa_node_mask as nodemask_t
  net: hns3: direct return when receive a unknown mailbox message
  net: hns3: using user configure after hardware reset
  net/smc: fix neighbour and rtable leak in smc_ib_find_route()
  ipv6: prevent NULL dereference in ip6_output()
  hsr: Simplify code for announcing HSR nodes timer setup
  ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
  dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
  rxrpc: Only transmit one ACK per jumbo packet received
  rxrpc: Fix congestion control algorithm
  selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
  ipv6: Fix potential uninit-value access in __ip6_make_skb()
  net: phy: marvell-88q2xxx: add support for Rev B1 and B2
  appletalk: Improve handling of broadcast packets
  ...

Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.

This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.

Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.

Fixes: c94a9aabec36 ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull pci fixes from Bjorn Helgaas:

 - Update kernel-parameters doc to describe "pcie_aspm=off" more
   accurately (Bjorn Helgaas)

 - Restore the parent's (not the child's) ASPM state to the parent
   during resume, which fixes a reboot during resume (Kai-Heng Feng)

* tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI/ASPM: Restore parent state to parent, child state to child
  PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouched

Attributes for FDB learned entries were added to the if_link netlink api
for bridge linkinfo but are missing from the rt_link.yaml spec. Add the
missing attributes to the spec.

Fixes: ddd1ad68826d ("net: bridge: Add netlink knobs for number / max learned FDB entries")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240503164304.87427-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc/other driver fixes and new device ids
  for 6.9-rc7 that resolve some reported problems.

  Included in here are:

   - iio driver fixes

   - mei driver fix and new device ids

   - dyndbg bugfix

   - pvpanic-pci driver bugfix

   - slimbus driver bugfix

   - fpga new device id

  All have been in linux-next with no reported problems"

* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  slimbus: qcom-ngd-ctrl: Add timeout for wait operation
  dyndbg: fix old BUG_ON in >control parser
  misc/pvpanic-pci: register attributes via pci_driver
  fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
  mei: me: add lunar lake point M DID
  mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
  iio:imu: adis16475: Fix sync mode setting
  iio: accel: mxc4005: Reset chip on probe() and resume()
  iio: accel: mxc4005: Interrupt handling fixes
  dt-bindings: iio: health: maxim,max30102: fix compatible check
  iio: pressure: Fixes SPI support for BMP3xx devices
  iio: pressure: Fixes BME280 SPI driver data

Previously we claimed "pcie_aspm=off" meant that ASPM would be disabled,
which is wrong.

Correct this to say that with "pcie_aspm=off", Linux doesn't touch any ASPM
configuration at all.  ASPM may have been enabled by firmware, and that
will be left unchanged.  See "aspm_support_enabled".

Link: https://lore.kernel.org/r/20240429191821.691726-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>

Pull sound fixes from Takashi Iwai:
 "As usual in a late stage, we received a fair amount of fixes for ASoC,
  and it became bigger than wished. But all fixes are rather device-
  specific, and they look pretty safe to apply.

  A major par of changes are series of fixes for ASoC meson and SOF
  drivers as well as for Realtek and Cirrus codecs. In addition, recent
  emu10k1 regression fixes and usual HD-audio quirks are included"

* tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
  ALSA: hda/realtek: Fix build error without CONFIG_PM
  ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models
  ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
  ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()
  ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection
  ASoC: cs35l56: fix usages of device_get_named_child_node()
  ASoC: da7219-aad: fix usage of device_get_named_child_node()
  ASoC: meson: cards: select SND_DYNAMIC_MINORS
  ASoC: meson: axg-tdm: add continuous clock support
  ASoC: meson: axg-tdm-interface: manage formatters in trigger
  ASoC: meson: axg-card: make links nonatomic
  ASoC: meson: axg-fifo: use threaded irq to check periods
  ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU
  ALSA: emu10k1: make E-MU FPGA writes potentially more reliable
  ALSA: emu10k1: fix E-MU dock initialization
  ALSA: emu10k1: use mutex for E-MU FPGA access locking
  ALSA: emu10k1: move the whole GPIO event handling to the workqueue
  ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()
  ALSA: emu10k1: fix E-MU card dock presence monitoring
  ASoC: rt715-sdca: volume step modification
  ...

Pull pin control fixes from Linus Walleij:

 - Fix a double-free in the pinctrl_enable() errorpath

 - Fix a refcount leak in pinctrl_dt_to_map()

 - Fix selecting the GPIO pin control state and the UART3 pin config
   group in the Intel Baytrail driver

 - Fix readback of schmitt trigger status in the Mediatek Paris driver,
   along with some semantic pin config issues in this driver

 - Fix a pin suffix typo in the Meson A1 driver

 - Fix an erroneous register offset in he Aspeed G6 driver

 - Fix an inconsistent lock state and the interrupt type on resume in
   the Renesas RZG2L driver

 - Fix some minor confusion in the Renesas DT bindings

* tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: renesas: rzg2l: Configure the interrupt type on resume
  pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()
  pinctrl: baytrail: Add pinconf group for uart3
  pinctrl: baytrail: Fix selecting gpio pinctrl state
  pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE
  pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback
  pinctrl: core: delete incorrect free in pinctrl_enable()
  pinctrl/meson: fix typo in PDM's pin name
  pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
  pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration
  dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties

Pull workqueue fixes from Tejun Heo:
 "Two doc update patches and the following three fixes:

   - On single node systems, the default pool is used but the
     node_nr_active for the default pool was set to min_active. This
     effectively limited the max concurrency of unbound pools on single
     node systems to 8 causing performance regressions on some
     workloads. Fixed by setting the default pool's node_nr_active to
     max_active.

   - wq_update_node_max_active() could trigger divide-by-zero if the
     intersection between the allowed CPUs for an unbound workqueue and
     online CPUs becomes empty.

   - When kick_pool() was trying to repatriate a worker to a CPU in its
     pod by setting task->wake_cpu, it didn't consider whether the CPU
     being selected is online or not which obviously can lead to
     subobtimal behaviors. On s390, this triggered a crash in arch code.
     The workqueue patch removes the gross misbehavior but doesn't fix
     the crash completely as there's a race window in which CPUs can go
     down after wake_cpu is set. Need to decide whether the fix should
     be on the core or arch side"

* tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix divide error in wq_update_node_max_active()
  workqueue: The default node_nr_active should have its max set to max_active
  workqueue: Fix selection of wake_cpu in kick_pool()
  docs/zh_CN: core-api: Update translation of workqueue.rst to 6.9-rc1
  Documentation/core-api: Update events_freezable_power references.

Pull scheduler fixes from Ingo Molnar:

 - Fix EEVDF corner cases

 - Fix two nohz_full= related bugs that can cause boot crashes
   and warnings

* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
  sched/isolation: Prevent boot crash when the boot CPU is nohz_full
  sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
  sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
  sched/eevdf: Always update V if se->on_rq when reweighting