Pull smb client fix from Steve French:
 "Small fix, also for stable"

* tag '6.10-rc7-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix setting SecurityFlags to true

If you try to set /proc/fs/cifs/SecurityFlags to 1 it
will set them to CIFSSEC_MUST_NTLMV2 which no longer is
relevant (the less secure ones like lanman have been removed
from cifs.ko) and is also missing some flags (like for
signing and encryption) and can even cause mount to fail,
so change this to set it to Kerberos in this case.

Also change the description of the SecurityFlags to remove mention
of flags which are no longer supported.

Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of these changes are Qualcomm SoC specific and came in just after
  I sent out the last set of fixes. This includes two regression fixes
  for SoC drivers, a defconfig change to ensure the Lenovo X13s is
  usable and 11 changes to DT files to fix regressions and minor
  platform specific issues.

  Tony and Chunyan step back from their respective maintainership roles
  on the omap and unisoc platforms, and Christophe in turn takes over
  maintaining some of the Freescale SoC drivers that he has been taking
  care of in practice already.

  Lastly, there are two trivial fixes for the davinci and sunxi
  platforms"

* tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY
  MAINTAINERS: Add more maintainers for omaps
  ARM: davinci: Convert comma to semicolon
  MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
  Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
  arm64: dts: qcom: qdu1000: Fix LLCC reg property
  arm64: dts: qcom: sm6115: add iommu for sdhc_1
  arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
  arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
  soc: qcom: pmic_glink: disable UCSI on sc8280xp
  arm64: defconfig: enable Elan i2c-hid driver
  arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
  arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
  arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
  arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
  arm64: dts: allwinner: Fix PMIC interrupt number
  arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
  arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
  arm64: dts: qcom: sc8180x: Fix LLCC reg property again

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - core: fix rc7's __skb_datagram_iter() regression

  Current release - new code bugs:

   - eth: bnxt: fix crashes when reducing ring count with active RSS
     contexts

  Previous releases - regressions:

   - sched: fix UAF when resolving a clash

   - skmsg: skip zero length skb in sk_msg_recvmsg2

   - sunrpc: fix kernel free on connection failure in
     xs_tcp_setup_socket

   - tcp: avoid too many retransmit packets

   - tcp: fix incorrect undo caused by DSACK of TLP retransmit

   - udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().

   - eth: ks8851: fix deadlock with the SPI chip variant

   - eth: i40e: fix XDP program unloading while removing the driver

  Previous releases - always broken:

   - bpf:
       - fix too early release of tcx_entry
       - fail bpf_timer_cancel when callback is being cancelled
       - bpf: fix order of args in call to bpf_map_kvcalloc

   - netfilter: nf_tables: prefer nft_chain_validate

   - ppp: reject claimed-as-LCP but actually malformed packets

   - wireguard: avoid unaligned 64-bit memory accesses"

* tag 'net-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
  net, sunrpc: Remap EPERM in case of connection failure in xs_tcp_setup_socket
  net/sched: Fix UAF when resolving a clash
  net: ks8851: Fix potential TX stall after interface reopen
  udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
  netfilter: nf_tables: prefer nft_chain_validate
  netfilter: nfnetlink_queue: drop bogus WARN_ON
  ethtool: netlink: do not return SQI value if link is down
  ppp: reject claimed-as-LCP but actually malformed packets
  selftests/bpf: Add timer lockup selftest
  net: ethernet: mtk-star-emac: set mac_managed_pm when probing
  e1000e: fix force smbus during suspend flow
  tcp: avoid too many retransmit packets
  bpf: Defer work in bpf_timer_cancel_and_free
  bpf: Fail bpf_timer_cancel when callback is being cancelled
  bpf: fix order of args in call to bpf_map_kvcalloc
  net: ethernet: lantiq_etop: fix double free in detach
  i40e: Fix XDP program unloading while removing the driver
  net: fix rc7's __skb_datagram_iter()
  net: ks8851: Fix deadlock with the SPI chip variant
  octeontx2-af: Fix incorrect value output on error path in rvu_check_rsrc_availability()
  ...

Qualcomm driver fixes for v6.10

UCSI support is disabled on SC8280XP while being debugged, as it's
causing the system to crash. A recent LLCC QDU1000 binding change is
reverted, to allow expressing the LLCC memory regions.

* tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
  soc: qcom: pmic_glink: disable UCSI on sc8280xp

Link: https://lore.kernel.org/r/20240702031157.341031-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Correct the example to match the help text from the devlink utility.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for the CMODX example in the recently added icache flushing
   prctl()

 - A fix to the perf driver to avoid corrupting event data on counter
   overflows when external overflow handlers are in use

 - A fix to clear all hardware performance monitor events on boot, to
   avoid dangling events firmware or previously booted kernels from
   triggering spuriously

 - A fix to the perf event probing logic to avoid erroneously reporting
   the presence of unimplemented counters. This also prevents some
   implemented counters from being reported

 - A build fix for the vector sigreturn selftest on clang

 - A fix to ftrace, which now requires the previously optional index
   argument to ftrace_graph_ret_addr()

 - A fix to avoid deadlocking if kexec crash handling triggers in an
   interrupt context

* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: kexec: Avoid deadlock in kexec crash path
  riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
  riscv: selftests: Fix vsetivli args for clang
  perf: RISC-V: Check standard event availability
  drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
  drivers/perf: riscv: Do not update the event data if uptodate
  documentation: Fix riscv cmodx example

Pull tracing fix from Steven Rostedt:
 "Fix ioctl conflict with memmapped ring buffer ioctl

  It was reported that the ioctl() number used to update the ring buffer
  memory mapping conflicted with the TCGETS ioctl causing strace to
  report:

    $ strace -e ioctl stty
    ioctl(0, TCGETS or TRACE_MMAP_IOCTL_GET_READER, {c_iflag=ICRNL|IXON, c_oflag=NL0|CR0|TAB0|BS0|VT0|FF0|OPOST|ONLCR, c_cflag=B38400|CS8|CREAD, c_lflag=ISIG|ICANON|ECHO|ECHOE|ECHOK|IEXTEN|ECHOCTL|ECHOKE, ...}) = 0

  Since this ioctl hasn't been in a full release yet, change it from
  "T", 0x1 to "R" 0x20, and also reserve 0x20-0x2F for future ioctl
  commands, as some more are being worked on for the future"

* tag 'trace-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Have memmapped ring buffer use ioctl of "R" range 0x20-2F

To prevent conflicts with other ioctl numbers to allow strace to have an
idea of what is happening, add the range of ioctls for the trace buffer
mapping from _IO("T", 0x1) to the range of "R" 0x20 - 0x2F.

Link: https://lore.kernel.org/linux-trace-kernel/20240630105322.GA17573@altlinux.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240630213626.GA23566@altlinux.org/

Cc: Jonathan Corbet <corbet@lwn.net>
Fixes: cf9f0f7c4c5bb ("tracing: Allow user-space mapping of the ring-buffer")
Link: https://lore.kernel.org/20240702153354.367861db@rorschach.local.home
Reported-by: "Dmitry V. Levin" <ldv@strace.io>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

This reverts commit f0f99f371822c48847e02e56d6e7de507e18f186.

QDU1000 has 7 register regions. The earlier commit 8e2506d01231
("dt-bindings: cache: qcom,llcc: Add LLCC compatible for QDU1000/QRU1000")
to add llcc compatible was reflecting the same, but dtsi change for
QDU1000 was not aligning with its binding. Later, commit f0f99f371822
("dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries") was merged
intended to fix this misalignment.

After the LLCC driver refactor, each LLCC bank/channel need to be
represented as one register space to avoid mapping to the region where
access is not there. Hence, revert the commit f0f99f371822 ("dt-bindings:
cache: qcom,llcc: correct QDU1000 reg entries") to align QDU1000 llcc
binding with its dtsi node.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240619061641.5261-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>