linux-stable.git/Documentation, branch linux-5.14.y Linux kernel stable tree fscrypt: allow 256-bit master keys with AES-256-XTS 2021-11-17T10:03:45+00:00 Eric Biggers ebiggers@google.com 2021-09-21T03:03:03+00:00 40cfb8e68aa073f03c25bc33022a8dbb29fdc777 [ Upstream commit 7f595d6a6cdc336834552069a2e0a4f6d4756ddf ] fscrypt currently requires a 512-bit master key when AES-256-XTS is used, since AES-256-XTS keys are 512-bit and fscrypt requires that the master key be at least as long any key that will be derived from it. However, this is overly strict because AES-256-XTS doesn't actually have a 512-bit security strength, but rather 256-bit. The fact that XTS takes twice the expected key size is a quirk of the XTS mode. It is sufficient to use 256 bits of entropy for AES-256-XTS, provided that it is first properly expanded into a 512-bit key, which HKDF-SHA512 does. Therefore, relax the check of the master key size to use the security strength of the derived key rather than the size of the derived key (except for v1 encryption policies, which don't use HKDF). Besides making things more flexible for userspace, this is needed in order for the use of a KDF which only takes a 256-bit key to be introduced into the fscrypt key hierarchy. This will happen with hardware-wrapped keys support, as all known hardware which supports that feature uses an SP800-108 KDF using AES-256-CMAC, so the wrapped keys are wrapped 256-bit AES keys. Moreover, there is interest in fscrypt supporting the same type of AES-256-CMAC based KDF in software as an alternative to HKDF-SHA512. There is no security problem with such features, so fix the key length check to work properly with them. Reviewed-by: Paul Crowley <paulcrowley@google.com> Link: https://lore.kernel.org/r/20210921030303.5598-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7f595d6a6cdc336834552069a2e0a4f6d4756ddf ]

fscrypt currently requires a 512-bit master key when AES-256-XTS is
used, since AES-256-XTS keys are 512-bit and fscrypt requires that the
master key be at least as long any key that will be derived from it.

However, this is overly strict because AES-256-XTS doesn't actually have
a 512-bit security strength, but rather 256-bit.  The fact that XTS
takes twice the expected key size is a quirk of the XTS mode.  It is
sufficient to use 256 bits of entropy for AES-256-XTS, provided that it
is first properly expanded into a 512-bit key, which HKDF-SHA512 does.

Therefore, relax the check of the master key size to use the security
strength of the derived key rather than the size of the derived key
(except for v1 encryption policies, which don't use HKDF).

Besides making things more flexible for userspace, this is needed in
order for the use of a KDF which only takes a 256-bit key to be
introduced into the fscrypt key hierarchy.  This will happen with
hardware-wrapped keys support, as all known hardware which supports that
feature uses an SP800-108 KDF using AES-256-CMAC, so the wrapped keys
are wrapped 256-bit AES keys.  Moreover, there is interest in fscrypt
supporting the same type of AES-256-CMAC based KDF in software as an
alternative to HKDF-SHA512.  There is no security problem with such
features, so fix the key length check to work properly with them.

Reviewed-by: Paul Crowley <paulcrowley@google.com>
Link: https://lore.kernel.org/r/20210921030303.5598-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Documentation:devicetree:bindings:iio:dac: Fix val 2021-11-17T10:03:42+00:00 Mihail Chindris mihail.chindris@analog.com 2021-10-07T08:00:36+00:00 93198e6da9eb946345fa2a7d4ee8a32e406c4cfc commit 8fc4f038fa832ec3543907fdcbe1334e1b0a8950 upstream. A correct value for output-range-microvolts is -5 to 5 Volts not -5 to 5 milivolts Fixes: e904cc899293f ("dt-bindings: iio: dac: AD5766 yaml documentation") Signed-off-by: Mihail Chindris <mihail.chindris@analog.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20211007080035.2531-6-mihail.chindris@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8fc4f038fa832ec3543907fdcbe1334e1b0a8950 upstream.

A correct value for output-range-microvolts is -5 to 5 Volts
not -5 to 5 milivolts

Fixes: e904cc899293f ("dt-bindings: iio: dac: AD5766 yaml documentation")
Signed-off-by: Mihail Chindris <mihail.chindris@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211007080035.2531-6-mihail.chindris@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen/balloon: add late_initcall_sync() for initial ballooning done 2021-11-17T10:03:39+00:00 Juergen Gross jgross@suse.com 2021-11-02T09:19:44+00:00 88e9929b632eed6755642ecfcbc78d1e4896cf5d commit 40fdea0284bb20814399da0484a658a96c735d90 upstream. When running as PVH or HVM guest with actual memory < max memory the hypervisor is using "populate on demand" in order to allow the guest to balloon down from its maximum memory size. For this to work correctly the guest must not touch more memory pages than its target memory size as otherwise the PoD cache will be exhausted and the guest is crashed as a result of that. In extreme cases ballooning down might not be finished today before the init process is started, which can consume lots of memory. In order to avoid random boot crashes in such cases, add a late init call to wait for ballooning down having finished for PVH/HVM guests. Warn on console if initial ballooning fails, panic() after stalling for more than 3 minutes per default. Add a module parameter for changing this timeout. [boris: replaced pr_info() with pr_notice()] Cc: <stable@vger.kernel.org> Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211102091944.17487-1-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 40fdea0284bb20814399da0484a658a96c735d90 upstream.

When running as PVH or HVM guest with actual memory < max memory the
hypervisor is using "populate on demand" in order to allow the guest
to balloon down from its maximum memory size. For this to work
correctly the guest must not touch more memory pages than its target
memory size as otherwise the PoD cache will be exhausted and the guest
is crashed as a result of that.

In extreme cases ballooning down might not be finished today before
the init process is started, which can consume lots of memory.

In order to avoid random boot crashes in such cases, add a late init
call to wait for ballooning down having finished for PVH/HVM guests.

Warn on console if initial ballooning fails, panic() after stalling
for more than 3 minutes per default. Add a module parameter for
changing this timeout.

[boris: replaced pr_info() with pr_notice()]

Cc: <stable@vger.kernel.org>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211102091944.17487-1-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property 2021-11-17T10:03:33+00:00 Krzysztof Kozlowski krzysztof.kozlowski@canonical.com 2021-10-08T11:37:14+00:00 8f3420977c98019c2399e55ba4b6cdbe71fdc49c commit a7fda04bc9b6ad9da8e19c9e6e3b1dab773d068a upstream. The driver was always parsing "s5m8767,pmic-buck-default-dvs-idx", not "s5m8767,pmic-buck234-default-dvs-idx". Cc: <stable@vger.kernel.org> Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Rob Herring <robh@kernel.org> Message-Id: <20211008113723.134648-3-krzysztof.kozlowski@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a7fda04bc9b6ad9da8e19c9e6e3b1dab773d068a upstream.

The driver was always parsing "s5m8767,pmic-buck-default-dvs-idx", not
"s5m8767,pmic-buck234-default-dvs-idx".

Cc: <stable@vger.kernel.org>
Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-3-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled 2021-11-17T10:03:33+00:00 Krzysztof Kozlowski krzysztof.kozlowski@canonical.com 2021-10-08T11:37:13+00:00 79814094ec44f111f6a19180570d3668c20bd2e4 commit b16bef60a9112b1e6daf3afd16484eb06e7ce792 upstream. The driver and its bindings, before commit 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") were requiring to provide at least one safe/default voltage for DVS registers if DVS GPIO is not being enabled. IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the s5m8767,pmic-buck2-dvs-voltage should still be present and contain one voltage. This requirement was coming from driver behavior matching this condition (none of DVS GPIO is enabled): it was always initializing the DVS selector pins to 0 and keeping the DVS enable setting at reset value (enabled). Therefore if none of DVS GPIO is enabled in devicetree, driver was configuring the first DVS voltage for buck[234]. Mentioned commit 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") broke it because DVS voltage won't be parsed from devicetree if DVS GPIO is not enabled. After the change, driver will configure bucks to use the register reset value as voltage which might have unpleasant effects. Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled in devicetree (therefore DVS voltage is also not parsed), explicitly disable it. Cc: <stable@vger.kernel.org> Fixes: 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Rob Herring <robh@kernel.org> Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b16bef60a9112b1e6daf3afd16484eb06e7ce792 upstream.

The driver and its bindings, before commit 04f9f068a619 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.

IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.

This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled).  Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].

Mentioned commit 04f9f068a619 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled.  After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.

Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.

Cc: <stable@vger.kernel.org>
Fixes: 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ice: Print the api_patch as part of the fw.mgmt.api 2021-10-27T07:59:35+00:00 Brett Creeley brett.creeley@intel.com 2021-09-27T18:21:50+00:00 aabf95dddb4557fb85bf560d02de27cb1e321b6f [ Upstream commit b726ddf984a56a385c9df406a66c221f3a77c951 ] Currently when a user uses "devlink dev info", the fw.mgmt.api will be the major.minor numbers as shown below: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7 <--- No patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 There are many features in the driver that depend on the major, minor, and patch version of the FW. Without the patch number in the output for fw.mgmt.api debugging issues related to the FW API version is difficult. Also, using major.minor.patch aligns with the existing firmware version which uses a 3 digit value. Fix this by making the fw.mgmt.api print the major.minor.patch versions. Shown below is the result: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7.9 <--- patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 Fixes: ff2e5c700e08 ("ice: add basic handler for devlink .info_get") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b726ddf984a56a385c9df406a66c221f3a77c951 ]

Currently when a user uses "devlink dev info", the fw.mgmt.api will be
the major.minor numbers as shown below:

devlink dev info pci/0000:3b:00.0
pci/0000:3b:00.0:
  driver ice
  serial_number 00-01-00-ff-ff-00-00-00
  versions:
      fixed:
        board.id K91258-000
      running:
        fw.mgmt 6.1.2
        fw.mgmt.api 1.7 <--- No patch number included
        fw.mgmt.build 0xd75e7d06
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.app.name ICE OS Default Package
        fw.app 1.3.27.0
        fw.app.bundle_id 0xc0000001
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110
      stored:
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110

There are many features in the driver that depend on the major, minor,
and patch version of the FW. Without the patch number in the output for
fw.mgmt.api debugging issues related to the FW API version is difficult.
Also, using major.minor.patch aligns with the existing firmware version
which uses a 3 digit value.

Fix this by making the fw.mgmt.api print the major.minor.patch
versions. Shown below is the result:

devlink dev info pci/0000:3b:00.0
pci/0000:3b:00.0:
  driver ice
  serial_number 00-01-00-ff-ff-00-00-00
  versions:
      fixed:
        board.id K91258-000
      running:
        fw.mgmt 6.1.2
        fw.mgmt.api 1.7.9 <--- patch number included
        fw.mgmt.build 0xd75e7d06
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.app.name ICE OS Default Package
        fw.app 1.3.27.0
        fw.app.bundle_id 0xc0000001
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110
      stored:
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110

Fixes: ff2e5c700e08 ("ice: add basic handler for devlink .info_get")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value 2021-10-13T07:41:57+00:00 Geert Uytterhoeven geert+renesas@glider.be 2021-09-24T12:35:12+00:00 94d64d44e41ad5423f6928f29ada631cd31acc4e [ Upstream commit b2d70c0dbf2731a37d1c7bcc86ab2387954d5f56 ] make dtbs_check: arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml: bridge@2c: reg:0:0: 45 was expected According to the datasheet, the I2C address can be either 0x2c or 0x2d, depending on the ADDR control input. Fixes: e3896e6dddf0b821 ("dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/08f73c2aa0d4e580303357dfae107d084d962835.1632486753.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b2d70c0dbf2731a37d1c7bcc86ab2387954d5f56 ]

make dtbs_check:

    arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml: bridge@2c: reg:0:0: 45 was expected

According to the datasheet, the I2C address can be either 0x2c or 0x2d,
depending on the ADDR control input.

Fixes: e3896e6dddf0b821 ("dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/08f73c2aa0d4e580303357dfae107d084d962835.1632486753.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
cxl: Move cxl_core to new directory 2021-09-26T12:10:21+00:00 Ben Widawsky ben.widawsky@intel.com 2021-08-02T17:29:38+00:00 e921d59a75c7932fd33bfa64c156fd40d7ba4da9 [ Upstream commit 5161a55c069f53d88da49274cbef6e3c74eadea9 ] CXL core is growing, and it's already arguably unmanageable. To support future growth, move core functionality to a new directory and rename the file to represent just bus support. Future work will remove non-bus functionality. Note that mem.h is renamed to cxlmem.h to avoid a namespace collision with the global ARCH=um mem.h header. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162792537866.368511.8915631504621088321.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5161a55c069f53d88da49274cbef6e3c74eadea9 ]

CXL core is growing, and it's already arguably unmanageable. To support
future growth, move core functionality to a new directory and rename the
file to represent just bus support. Future work will remove non-bus
functionality.

Note that mem.h is renamed to cxlmem.h to avoid a namespace collision
with the global ARCH=um mem.h header.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162792537866.368511.8915631504621088321.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation 2021-09-22T10:39:24+00:00 Miquel Raynal miquel.raynal@bootlin.com 2021-06-10T14:39:45+00:00 65fa28b7695fc6c5f71b3574e1a6c8373f8ca433 [ Upstream commit 778cb8e39f6ec252be50fc3850d66f3dcbd5dd5a ] "PAGESIZE / 512" is the number of ECC chunks. "ECC_BYTES" is the number of bytes needed to store a single ECC code. "2" is the space reserved by the bad block marker. "2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal than the total number of OOB bytes, otherwise it won't fit. Fix the equation by substituting s/>=/<=/. Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 778cb8e39f6ec252be50fc3850d66f3dcbd5dd5a ]

"PAGESIZE / 512" is the number of ECC chunks.
"ECC_BYTES" is the number of bytes needed to store a single ECC code.
"2" is the space reserved by the bad block marker.

"2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal
than the total number of OOB bytes, otherwise it won't fit.

Fix the equation by substituting s/>=/<=/.

Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
dt-bindings: arm: Fix Toradex compatible typo 2021-09-22T10:39:22+00:00 David Heidelberg david@ixit.cz 2021-09-12T16:51:20+00:00 e7b260fd73099e31ef16a6ce022d2bdd5db9b9af commit 55c21d57eafb7b379bb7b3e93baf9ca2695895b0 upstream. Fix board compatible typo reported by dtbs_check. Fixes: f4d1577e9bc6 ("dt-bindings: arm: Convert Tegra board/soc bindings to json-schema") Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20210912165120.188490-1-david@ixit.cz Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 55c21d57eafb7b379bb7b3e93baf9ca2695895b0 upstream.

Fix board compatible typo reported by dtbs_check.

Fixes: f4d1577e9bc6 ("dt-bindings: arm: Convert Tegra board/soc bindings to json-schema")
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210912165120.188490-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>