linux-stable.git/Documentation/usb, branch v5.18

usb: gadget: f_uac2: Optionally determine bInterval for HS and SS

2022-01-31T13:26:18+00:00

Allow setting configfs params p_hs_bint/c_hs_bint to 0. If they are set
to 0, determine the largest bInterval (4 to 1) for which the required
bandwidth of the max samplerate fits the max allowed packet size. If the
required bandwidth exceeds max bandwidth for single-packet mode
(ep->mc=1), keep bInterval at 1.

The FS speed is left at fixed bInterval=1.

If for any speed the required bandwidth exceeds the max bandwidth
corresponding to the selected/determined bInterval, print a warning.

Signed-off-by: Pavel Hofman 
Link: https://lore.kernel.org/r/20220127114331.41367-4-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_uac2: Add HS/SS bInterval to configfs

2022-01-31T13:26:18+00:00

Allow configuring the HS/SS bInterval through configfs, via
parameters p_hs_bint/c_hs_bint separately for playback/capture.

The default param values are left at the original 4.

Suggested-by: John Keeping 
Signed-off-by: Pavel Hofman 
Link: https://lore.kernel.org/r/20220127114331.41367-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_uac2: allow changing interface name via configfs

2022-01-26T13:10:44+00:00

This adds "function_name" configfs entry to change string value
of the iInterface field. This field will be shown in Windows' audio
settings panel, so being able to change it is useful. It will default
to "Source/Sink" just as before.

Signed-off-by: Yunhao Tian 
Link: https://lore.kernel.org/r/20220122112446.1415547-2-t123yh.xyz@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_uac1: allow changing interface name via configfs

2022-01-26T13:10:40+00:00

This adds "function_name" configfs entry to change string value
of the iInterface field. This field will be shown in Windows' audio
settings panel, so being able to change it is useful. It will default
to "AC Interface" just as before if unchanged.

Signed-off-by: Yunhao Tian 
Link: https://lore.kernel.org/r/20220122112446.1415547-1-t123yh.xyz@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_uac1: Support multiple sampling rates

2022-01-26T13:06:08+00:00

A list of sampling rates can be specified via configfs. All enabled
sampling rates are sent to the USB host on request. When the host
selects a sampling rate the internal active rate is updated.

Config strings with single value stay compatible with the previous version.

Multiple samplerates passed as configuration arrays to g_audio module
when built for f_uac1.

Signed-off-by: Julian Scheel 
Signed-off-by: Pavel Hofman 
Link: https://lore.kernel.org/r/20220121155308.48794-7-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_uac2: Support multiple sampling rates

2022-01-26T13:06:08+00:00

A list of sampling rates can be specified via configfs. All enabled
sampling rates are sent to the USB host on request. When the host
selects a sampling rate, the internal active rate (stored in
struct f_uac2) is updated.

The gadget no longer supports only one frequency. Therefore USB strings
corresponding to the clock sources are renamed from specific Hz value to
general names Input clock/Output clock.

Config strings with single value stay compatible with the previous
version.

Multiple samplerates passed as configuration arrays to g_audio module
when built for f_uac2.

Signed-off-by: Julian Scheel 
Signed-off-by: Pavel Hofman 
Link: https://lore.kernel.org/r/20220121155308.48794-6-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman

docs: ABI: fixed req_number desc in UAC1

2021-12-30T11:10:44+00:00

Fixed wording of the req_number description in UAC1 docs.

Signed-off-by: Pavel Hofman 
Link: https://lore.kernel.org/r/20211225130929.205629-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman

docs: usb: fix malformed table

2021-08-05T10:31:51+00:00

The tables are separated with tabs and spaces mixed together, leading
to malformation. Changed the characters all into spaces to solve this
issue.

Signed-off-by: Hu Haowen 
Link: https://lore.kernel.org/r/20210805040146.121526-1-src.res@email.cn
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_uac1: add volume and mute support

2021-07-21T08:10:11+00:00

This adds bi-directional (host->device, device->host)
volume/mute support to the f_uac1 driver by adding
Feature Units and interrupt endpoint.

Currently only master channel is supported.

Volume and mute are configurable through configfs,
by default volume has -100..0 dB range with 1 dB step.

Similar to existing flexible endpoints configuration,
Feature Unit won't be added to the topology if both
mute and volume are not enabled, also interrupt endpoint
isn't added to the device if no feature unit is present

Signed-off-by: Ruslan Bilovol 
Signed-off-by: Pavel Hofman 
Link: https://lore.kernel.org/r/20210712125529.76070-5-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_uac2: add volume and mute support

2021-07-21T08:10:11+00:00

This adds bi-directional (host->device, device->host)
volume/mute support to the f_uac2 driver by adding
Feature Units and interrupt endpoint.

Currently only master channel is supported.

Volume and mute are configurable through configfs,
by default volume has -100..0 dB range with 1 dB step.

Similar to existing flexible endpoints configuration,
Feature Unit won't be added to the topology if both
mute and volume are not enabled, also interrupt endpoint
isn't added to the device if no feature unit is present

Signed-off-by: Ruslan Bilovol 
Signed-off-by: Pavel Hofman 
Link: https://lore.kernel.org/r/20210712125529.76070-4-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman