Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.13-rc2. They consist of a number
  of resolutions for reported issues:

   - typec fixes for found problems

   - xhci fixes and quirk additions

   - dwc3 driver fixes

   - minor fixes found by Coverity

   - cdc-wdm fixes for reported problems

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
  usb: core: hub: fix race condition about TRSMRCY of resume
  usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default
  xhci: Add reset resume quirk for AMD xhci controller.
  usb: xhci: Increase timeout for HC halt
  xhci: Do not use GFP_KERNEL in (potentially) atomic context
  xhci: Fix giving back cancelled URBs even if halted endpoint can't reset
  xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
  usb: musb: Fix an error message
  usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS
  usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work
  usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
  usb: fotg210-hcd: Fix an error message
  docs: usb: function: Modify path name
  usb: dwc3: omap: improve extcon initialization
  usb: typec: ucsi: Put fwnode in any case during ->probe()
  usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP
  usb: dwc2: Remove obsolete MODULE_ constants from platform.c
  usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()
  usb: dwc3: imx8mp: detect dwc3 core node via compatible string
  usb: dwc3: gadget: Return success always for kick transfer in ep queue
  ...

A few of the Documentation .rst files begin with a Unicode
byte order mark (BOM). The BOM may signify endianess for
16-bit or 32-bit encodings or indicate that the text stream
is indeed Unicode. We don't need it for either of those uses.
It may also interfere with (confuse) some software.

Since we don't need it and its use is optional, just delete
the uses of it in Documentation/.

https://en.wikipedia.org/wiki/Byte_order_mark

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/20210506231907.14359-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Original path does not exists, so changed to
"Documentation/ABI/testing/configfs-usb-gadget"

Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20210506122020.7117-1-jj251510319013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The old document for usbip protocol is misleading and hard to read:
  * Some fields in header are incorrect
  * Explanation of some fields are unclear or even wrong
  * Padding of header (namely all headers have the same length) is
    not explicitly pointed out, which is crucial for stream protocol
    like TCP

Major changes:
  * Document the correct field as described in the codebase.
  * Document the padding in usbip headers. This is crucial for TCP
    stream hence these padding should be explicitly point out.
    In code these padding are implemented by a union of all headers.
  * Fix two FIXME related to usbip unlink and Document the behavior
    of unlink in different situation.
  * Clarify some field with more accurate explanation, like those
    fields associated with URB. Some constraints are extracted from
    code.
  * Delete specific transfer_flag doc in usbip as it should be
    documented by the URB doc in Documentation/driver-api/usb/URB.rst
  * Add data captured from wire as example

Version change:
    From "PRELIMINARY DRAFT, MAY CONTAIN MISTAKES, 28 Jun 2011"
    To "Version 1, 31 Mar 2021"

Co-developed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hongren Zheng <i@zenithal.me>
Link: https://lore.kernel.org/r/YGNZHfmAbHO6fyAr@Sun
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update Raw Gadget documentation and Kconfig. Make the description more
precise and clear, fix typos and grammar mistakes, and do other cleanups.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/f4c650c94ae2b910e38819d51109cd5f0b251a2a.1611429174.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch allows the administrator to configure the interface
name of a function using u_ether (e.g., eem, ncm, rndis).

Currently, all such interfaces, regardless of function type, are
always called usb0, usb1, etc. This makes it very cumbersome to
use more than one such type at a time, because userspace cannnot
easily tell the interfaces apart and apply the right
configuration to each one. Interface renaming in userspace based
on driver doesn't help, because the interfaces all have the same
driver. Without this patch, doing this require hacks/workarounds
such as setting fixed MAC addresses on the functions, and then
renaming by MAC address, or scraping configfs after each
interface is created to find out what it is.

Setting the interface name is done by writing to the same
"ifname" configfs attribute that reports the interface name after
the function is bound. The write must contain an interface
pattern such as "usb%d" (which will cause the net core to pick
the next available interface name starting with "usb").
This patch does not allow writing an exact interface name (as
opposed to a pattern) because if the interface already exists at
bind time, the bind will fail and the whole gadget will fail to
activate. This could be allowed in a future patch.

For compatibility with current userspace, when reading an ifname
that has not currently been set, the result is still "(unnamed
net_device)". Once a write to ifname happens, then reading ifname
will return whatever was last written.

Tested by configuring an rndis function and an ncm function on
the same gadget, and writing "rndis%d" to ifname on the rndis
function and "ncm%d" to ifname on the ncm function. When the
gadget was bound, the rndis interface was rndis0 and the ncm
interface was ncm0.

Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Link: https://lore.kernel.org/r/20210113234222.3272933-1-lorenzo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719160910.60018-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull documentation updates from Jonathan Corbet:
 "A fair amount of stuff this time around, dominated by yet another
  massive set from Mauro toward the completion of the RST conversion. I
  *really* hope we are getting close to the end of this. Meanwhile,
  those patches reach pretty far afield to update document references
  around the tree; there should be no actual code changes there. There
  will be, alas, more of the usual trivial merge conflicts.

  Beyond that we have more translations, improvements to the sphinx
  scripting, a number of additions to the sysctl documentation, and lots
  of fixes"

* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
  Documentation: fixes to the maintainer-entry-profile template
  zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
  tracing: Fix events.rst section numbering
  docs: acpi: fix old http link and improve document format
  docs: filesystems: add info about efivars content
  Documentation: LSM: Correct the basic LSM description
  mailmap: change email for Ricardo Ribalda
  docs: sysctl/kernel: document unaligned controls
  Documentation: admin-guide: update bug-hunting.rst
  docs: sysctl/kernel: document ngroups_max
  nvdimm: fixes to maintainter-entry-profile
  Documentation/features: Correct RISC-V kprobes support entry
  Documentation/features: Refresh the arch support status files
  Revert "docs: sysctl/kernel: document ngroups_max"
  docs: move locking-specific documents to locking/
  docs: move digsig docs to the security book
  docs: move the kref doc into the core-api book
  docs: add IRQ documentation at the core-api book
  docs: debugging-via-ohci1394.txt: add it to the core-api book
  docs: fix references for ipmi.rst file
  ...

Mention the issue with fixed UDC addresses.

Links external examples and test suite.

Add more implmenetation details and potential improvements.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

Raw Gadget is currently unable to stall/halt/wedge gadget endpoints,
which is required for proper emulation of certain USB classes.

This patch adds a few more ioctls:

- USB_RAW_IOCTL_EP0_STALL allows to stall control endpoint #0 when
  there's a pending setup request for it.
- USB_RAW_IOCTL_SET/CLEAR_HALT/WEDGE allow to set/clear halt/wedge status
  on non-control non-isochronous endpoints.

Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>