There were some documentation locations that irda was mentioned, as well as an old MAINTAINERS entry and the networking sysctl entries. Clean these all out as this stuff really is finally gone. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull x86 fixes from Thomas Gleixner:
"A set of fixes and updates for x86:
- Address a swiotlb regression which was caused by the recent DMA
rework and made driver fail because dma_direct_supported() returned
false
- Fix a signedness bug in the APIC ID validation which caused invalid
APIC IDs to be detected as valid thereby bloating the CPU possible
space.
- Fix inconsisten config dependcy/select magic for the MFD_CS5535
driver.
- Fix a corruption of the physical address space bits when encryption
has reduced the address space and late cpuinfo updates overwrite
the reduced bit information with the original value.
- Dominiks syscall rework which consolidates the architecture
specific syscall functions so all syscalls can be wrapped with the
same macros. This allows to switch x86/64 to struct pt_regs based
syscalls. Extend the clearing of user space controlled registers in
the entry patch to the lower registers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix signedness bug in APIC ID validity checks
x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
x86/olpc: Fix inconsistent MFD_CS5535 configuration
swiotlb: Use dma_direct_supported() for swiotlb_ops
syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
syscalls/core, syscalls/x86: Clean up syscall stub naming convention
syscalls/x86: Extend register clearing on syscall entry to lower registers
syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
x86/syscalls: Don't pointlessly reload the system call number
x86/mm: Fix documentation of module mapping range with 4-level paging
x86/cpuid: Switch to 'static const' specifier
clang-format is a tool to format C/C++/... code according to a set of
rules and heuristics. Like most tools, it is not perfect nor covers
every single case, but it is good enough to be helpful.
In particular, it is useful for quickly re-formatting blocks of code
automatically, for reviewing full files in order to spot coding style
mistakes, typos and possible improvements. It is also handy for sorting
``#includes``, for aligning variables and macros, for reflowing text and
other similar tasks. It also serves as a teaching tool/guide for
newcomers.
The tool itself has been already included in the repositories of popular
Linux distributions for a long time. The rules in this file are
intended for clang-format >= 4, which is easily available in most
distributions.
This commit adds the configuration file that contains the rules that the
tool uses to know how to format the code according to the kernel coding
style. This gives us several advantages:
* clang-format works out of the box with reasonable defaults;
avoiding that everyone has to re-do the configuration.
* Everyone agrees (eventually) on what is the most useful default
configuration for most of the kernel.
* If it becomes commonplace among kernel developers, clang-format
may feel compelled to support us better. They already recognize
the Linux kernel and its style in their documentation and in one
of the style sub-options.
Some of clang-format's features relevant for the kernel are:
* Uses clang's tooling support behind the scenes to parse and rewrite
the code. It is not based on ad-hoc regexps.
* Supports reasonably well the Linux kernel coding style.
* Fast enough to be used at the press of a key.
* There are already integrations (either built-in or third-party)
for many common editors used by kernel developers (e.g. vim,
emacs, Sublime, Atom...) that allow you to format an entire file
or, more usefully, just your selection.
* Able to parse unified diffs -- you can, for instance, reformat
only the lines changed by a git commit.
* Able to reflow text comments as well.
* Widely supported and used by hundreds of developers in highly
complex projects and organizations (e.g. the LLVM project itself,
Chromium, WebKit, Google, Mozilla...). Therefore, it will be
supported for a long time.
See more information about the tool at:
https://clang.llvm.org/docs/ClangFormat.html
https://clang.llvm.org/docs/ClangFormatStyleOptions.html
Link: http://lkml.kernel.org/r/20180318171632.qfkemw3mwbcukth6@gmail.com
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tidy the naming convention for compat syscall subs. Hints which describe
the purpose of the stub go in front and receive a double underscore to
denote that they are generated on-the-fly by the COMPAT_SYSCALL_DEFINEx()
macro.
For the generic case, this means:
t kernel_waitid # common C function (see kernel/exit.c)
__do_compat_sys_waitid # inlined helper doing the actual work
# (takes original parameters as declared)
T __se_compat_sys_waitid # sign-extending C function calling inlined
# helper (takes parameters of type long,
# casts them to unsigned long and then to
# the declared type)
T compat_sys_waitid # alias to __se_compat_sys_waitid()
# (taking parameters as declared), to
# be included in syscall table
For x86, the naming is as follows:
t kernel_waitid # common C function (see kernel/exit.c)
__do_compat_sys_waitid # inlined helper doing the actual work
# (takes original parameters as declared)
t __se_compat_sys_waitid # sign-extending C function calling inlined
# helper (takes parameters of type long,
# casts them to unsigned long and then to
# the declared type)
T __ia32_compat_sys_waitid # IA32_EMULATION 32-bit-ptregs -> C stub,
# calls __se_compat_sys_waitid(); to be
# included in syscall table
T __x32_compat_sys_waitid # x32 64-bit-ptregs -> C stub, calls
# __se_compat_sys_waitid(); to be included
# in syscall table
If only one of IA32_EMULATION and x32 is enabled, __se_compat_sys_waitid()
may be inlined into the stub __{ia32,x32}_compat_sys_waitid().
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180409105145.5364-3-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull Kbuild updates from Masahiro Yamada: - add a shell script to get Clang version - improve portability of build scripts - drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code - rename built-in.o which is now thin archive to built-in.a - process clean/build targets one by one to get along with -j option - simplify ld-option - improve building with CONFIG_TRIM_UNUSED_KSYMS - define KBUILD_MODNAME even for objects shared among multiple modules - avoid linking multiple instances of same objects from composite objects - move <linux/compiler_types.h> to c_flags to include it only for C files - clean-up various Makefiles * tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits) kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h> kbuild: clean up link rule of composite modules kbuild: clean up archive rule of built-in.a kbuild: remove partial section mismatch detection for built-in.a net: liquidio: clean up Makefile for simpler composite object handling lib: zstd: clean up Makefile for simpler composite object handling kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a kbuild: rename real-objs-y/m to real-obj-y/m kbuild: move modname and modname-multi close to modname_flags kbuild: simplify modname calculation kbuild: fix modname for composite modules kbuild: define KBUILD_MODNAME even if multiple modules share objects kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi kbuild: Use ls(1) instead of stat(1) to obtain file size kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS kbuild: move include/config/ksym/* to include/ksym/* kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module kbuild: restore autoksyms.h touch to the top Makefile kbuild: move 'scripts' target below kbuild: remove wrong 'touch' in adjust_autoksyms.sh ...
Pull documentation updates from Jonathan Corbet:
"There's been a fair amount of activity in Documentation/ this time
around:
- Lots of work aligning Documentation/ABI with reality, done by
Aishwarya Pant.
- The trace documentation has been converted to RST by Changbin Du
- I thrashed up kernel-doc to deal with a parsing issue and to try to
make the code more readable. It's still a 20+-year-old Perl hack,
though.
- Lots of other updates, typo fixes, and more"
* tag 'docs-4.17' of git://git.lwn.net/linux: (82 commits)
Documentation/process: update FUSE project website
docs: kernel-doc: fix parsing of arrays
dmaengine: Fix spelling for parenthesis in dmatest documentation
dmaengine: Make dmatest.rst indeed reST compatible
dmaengine: Add note to dmatest documentation about supported channels
Documentation: magic-numbers: Fix typo
Documentation: admin-guide: add kvmconfig, xenconfig and tinyconfig commands
Input: alps - Update documentation for trackstick v3 format
Documentation: Mention why %p prints ptrval
COPYING: use the new text with points to the license files
COPYING: create a new file with points to the Kernel license files
Input: trackpoint: document sysfs interface
xfs: Change URL for the project in xfs.txt
char/bsr: add sysfs interface documentation
acpi: nfit: document sysfs interface
block: rbd: update sysfs interface
Documentation/sparse: fix typo
Documentation/CodingStyle: Add an example for braces
docs/vm: update 00-INDEX
kernel-doc: Remove __sched markings
...
This keeps it in line with the SYSCALL_DEFINEx() / COMPAT_SYSCALL_DEFINEx() calling convention. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
According to the old project site, https://sourceforge.net/projects/fuse/ the project has moved to https://github.com/libfuse/ so we update the link to point to the latest libfuse release. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This fixes a little then / them confusion. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Incremental linking is gone, so rename built-in.o to built-in.a, which is the usual extension for archive files. This patch does two things, first is a simple search/replace: git grep -l 'built-in\.o' | xargs sed -i 's/built-in\.o/built-in\.a/g' The second is to invert nesting of nested text manipulations to avoid filtering built-in.a out from libs-y2: -libs-y2 := $(filter-out %.a, $(patsubst %/, %/built-in.a, $(libs-y))) +libs-y2 := $(patsubst %/, %/built-in.a, $(filter-out %.a, $(libs-y))) Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>