linux-stable.git/Documentation/networking/devlink, branch linux-6.5.y Linux kernel stable tree net/mlx5e: Add recovery flow for tx devlink health reporter for unhealthy PTP SQ 2023-11-28T17:14:57+00:00 Rahul Rameshbabu rrameshbabu@nvidia.com 2023-08-09T04:10:21+00:00 647eb36aaeca8ea1ccd5e89674cc5d5080390dee [ Upstream commit 53b836a44db4259b94ffcfff321fb3d63f976b76 ] A new check for the tx devlink health reporter is introduced for determining when the PTP port timestamping SQ is considered unhealthy. If there are enough CQEs considered never to be delivered, the space that can be utilized on the SQ decreases significantly, impacting performance and usability of the SQ. The health reporter is triggered when the number of likely never delivered port timestamping CQEs that utilize the space of the PTP SQ is greater than 93.75% of the total capacity of the SQ. A devlink health reporter recover method is also provided for this specific TX error context that restarts the PTP SQ. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Stable-dep-of: 92214be5979c ("net/mlx5e: Update doorbell for port timestamping CQ before the software counter") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 53b836a44db4259b94ffcfff321fb3d63f976b76 ]

A new check for the tx devlink health reporter is introduced for
determining when the PTP port timestamping SQ is considered unhealthy. If
there are enough CQEs considered never to be delivered, the space that can
be utilized on the SQ decreases significantly, impacting performance and
usability of the SQ. The health reporter is triggered when the number of
likely never delivered port timestamping CQEs that utilize the space of the
PTP SQ is greater than 93.75% of the total capacity of the SQ. A devlink
health reporter recover method is also provided for this specific TX error
context that restarts the PTP SQ.

Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 92214be5979c ("net/mlx5e: Update doorbell for port timestamping CQ before the software counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
net/mlx5: Consolidate devlink documentation in devlink/mlx5.rst 2023-11-28T17:14:57+00:00 Rahul Rameshbabu rrameshbabu@nvidia.com 2023-02-27T21:57:00+00:00 11bffa0c4ef27651aa3066d66077fbfbf5a1dc70 [ Upstream commit b608dd670bb69c89d5074685899d4c1089f57a16 ] De-duplicate documentation by removing mellanox/mlx5/devlink.rst. Instead, only use the generic devlink documentation directory to document mlx5 devlink parameters. Avoid providing general devlink tool usage information in mlx5-specific documentation. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Stable-dep-of: 92214be5979c ("net/mlx5e: Update doorbell for port timestamping CQ before the software counter") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b608dd670bb69c89d5074685899d4c1089f57a16 ]

De-duplicate documentation by removing mellanox/mlx5/devlink.rst. Instead,
only use the generic devlink documentation directory to document mlx5
devlink parameters. Avoid providing general devlink tool usage information
in mlx5-specific documentation.

Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 92214be5979c ("net/mlx5e: Update doorbell for port timestamping CQ before the software counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2023-04-20T23:29:51+00:00 Jakub Kicinski kuba@kernel.org 2023-04-20T23:27:33+00:00 681c5b51dc6b8ff1ec05555243eccf64a08cb2fd Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Adjacent changes:

net/mptcp/protocol.h
  63740448a32e ("mptcp: fix accept vs worker race")
  2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
  ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice: document RDMA devlink parameters 2023-04-18T01:53:13+00:00 Jacob Keller jacob.e.keller@intel.com 2023-04-14T16:26:14+00:00 1a2bd3bd72e978304cdc0a7385e8048e8242225d Commit e523af4ee560 ("net/ice: Add support for enable_iwarp and enable_roce devlink param") added support for the enable_roce and enable_iwarp parameters in the ice driver. It didn't document these parameters in the ice devlink documentation file. Add this documentation, including a note about the mutual exclusion between the two modes. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Commit e523af4ee560 ("net/ice: Add support for enable_iwarp and enable_roce
devlink param") added support for the enable_roce and enable_iwarp
parameters in the ice driver. It didn't document these parameters in the
ice devlink documentation file. Add this documentation, including a note
about the mutual exclusion between the two modes.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5e: Add devlink hairpin queues parameters 2023-03-16T05:12:08+00:00 Gal Pressman gal@nvidia.com 2023-03-14T05:42:30+00:00 1bffcea42926b26e092045ac398850e80d950bb2 We refer to a TC NIC rule that involves forwarding as "hairpin". Hairpin queues are mlx5 hardware specific implementation for hardware forwarding of such packets. Per the discussion in [1], move the hairpin queues control (number and size) from debugfs to devlink. Expose two devlink params: - hairpin_num_queues: control the number of hairpin queues - hairpin_queue_size: control the size (in packets) of the hairpin queues [1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/ Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-12-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
We refer to a TC NIC rule that involves forwarding as "hairpin".
Hairpin queues are mlx5 hardware specific implementation for hardware
forwarding of such packets.

Per the discussion in [1], move the hairpin queues control (number and
size) from debugfs to devlink.

Expose two devlink params:
- hairpin_num_queues: control the number of hairpin queues
- hairpin_queue_size: control the size (in packets) of the hairpin queues

[1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/

Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sfc: add devlink info support for ef100 2023-02-16T11:03:12+00:00 Alejandro Lucero alejandro.lucero-palau@amd.com 2023-02-15T09:08:22+00:00 14743ddd2495c96caa18e382625c034e49a812e2 Add devlink info support for ef100. The information reported is obtained through the MCDI interface with the specific meaning defined in new documentation file. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Add devlink info support for ef100. The information reported is obtained
through the MCDI interface with the specific meaning defined in new
documentation file.

Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux 2023-02-16T03:24:52+00:00 Jakub Kicinski kuba@kernel.org 2023-02-16T03:24:52+00:00 0f19f514dea1837caff0b40c3e966ecedc95fec8 Saeed Mahameed says: ==================== mlx5-updates-2023-02-10 1) From Roi and Mark: MultiPort eswitch support MultiPort E-Switch builds on newer hardware's capabilities and introduces a mode where a single E-Switch is used and all the vports and physical ports on the NIC are connected to it. The new mode will allow in the future a decrease in the memory used by the driver and advanced features that aren't possible today. This represents a big change in the current E-Switch implantation in mlx5. Currently, by default, each E-Switch manager manages its E-Switch. Steering rules in each E-Switch can only forward traffic to the native physical port associated with that E-Switch. While there are ways to target non-native physical ports, for example using a bond or via special TC rules. None of the ways allows a user to configure the driver to operate by default in such a mode nor can the driver decide to move to this mode by default as it's user configuration-driven right now. While MultiPort E-Switch single FDB mode is the preferred mode, older generations of ConnectX hardware couldn't support this mode so it was never implemented. Now that there is capable hardware present, start the transition to having this mode by default. Introduce a devlink parameter to control MultiPort Eswitch single FDB mode. This will allow users to select this mode on their system right now and in the future will allow the driver to move to this mode by default. 2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic 2.1) Cleanups related to mlx5's devlink port logic 2.2) Move devlink port registration to be done before netdev alloc 2.3) Create auxdev devlink instance in the same ns as parent devlink 2.4) Suspend auxiliary devices only in case of PCI device suspend * tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Suspend auxiliary devices only in case of PCI device suspend net/mlx5: Remove "recovery" arg from mlx5_load_one() function net/mlx5e: Create auxdev devlink instance in the same ns as parent devlink net/mlx5e: Move devlink port registration to be done before netdev alloc net/mlx5e: Move dl_port to struct mlx5e_dev net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_port net/mlx5e: Pass mdev to mlx5e_devlink_port_register() net/mlx5: Remove outdated comment net/mlx5e: TC, Remove redundant parse_attr argument net/mlx5e: Use a simpler comparison for uplink rep net/mlx5: Lag, Add single RDMA device in multiport mode net/mlx5: Lag, set different uplink vport metadata in multiport eswitch mode net/mlx5: E-Switch, rename bond update function to be reused net/mlx5e: TC, Add peer flow in mpesw mode net/mlx5: Lag, Control MultiPort E-Switch single FDB mode ==================== Link: https://lore.kernel.org/r/20230214221239.159033-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Saeed Mahameed says:

====================
mlx5-updates-2023-02-10

1) From Roi and Mark: MultiPort eswitch support

MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.

The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.

This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.

While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.

Introduce a devlink parameter to control MultiPort Eswitch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.

2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic
 2.1) Cleanups related to mlx5's devlink port logic
 2.2) Move devlink port registration to be done before netdev alloc
 2.3) Create auxdev devlink instance in the same ns as parent devlink
 2.4) Suspend auxiliary devices only in case of PCI device suspend

* tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Suspend auxiliary devices only in case of PCI device suspend
  net/mlx5: Remove "recovery" arg from mlx5_load_one() function
  net/mlx5e: Create auxdev devlink instance in the same ns as parent devlink
  net/mlx5e: Move devlink port registration to be done before netdev alloc
  net/mlx5e: Move dl_port to struct mlx5e_dev
  net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_port
  net/mlx5e: Pass mdev to mlx5e_devlink_port_register()
  net/mlx5: Remove outdated comment
  net/mlx5e: TC, Remove redundant parse_attr argument
  net/mlx5e: Use a simpler comparison for uplink rep
  net/mlx5: Lag, Add single RDMA device in multiport mode
  net/mlx5: Lag, set different uplink vport metadata in multiport eswitch mode
  net/mlx5: E-Switch, rename bond update function to be reused
  net/mlx5e: TC, Add peer flow in mpesw mode
  net/mlx5: Lag, Control MultiPort E-Switch single FDB mode
====================

Link: https://lore.kernel.org/r/20230214221239.159033-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink: Update devlink health documentation 2023-02-16T03:15:44+00:00 Moshe Shemesh moshe@nvidia.com 2023-02-14T16:38:05+00:00 c745cfb27ae3eec2d16e1f8643338f2067d4fef8 Update devlink-health.rst file: - Add devlink formatted message (fmsg) API documentation. - Add auto-dump as a condition to do dump once error reported. - Expand OOB to clarify this acronym. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Update devlink-health.rst file:
- Add devlink formatted message (fmsg) API documentation.
- Add auto-dump as a condition to do dump once error reported.
- Expand OOB to clarify this acronym.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5: Lag, Control MultiPort E-Switch single FDB mode 2023-02-14T22:08:24+00:00 Roi Dayan roid@nvidia.com 2022-11-28T11:33:03+00:00 a32327a3a02c6513feaeb122a6d8fb6e8d168365 MultiPort E-Switch builds on newer hardware's capabilities and introduces a mode where a single E-Switch is used and all the vports and physical ports on the NIC are connected to it. The new mode will allow in the future a decrease in the memory used by the driver and advanced features that aren't possible today. This represents a big change in the current E-Switch implantation in mlx5. Currently, by default, each E-Switch manager manages its E-Switch. Steering rules in each E-Switch can only forward traffic to the native physical port associated with that E-Switch. While there are ways to target non-native physical ports, for example using a bond or via special TC rules. None of the ways allows a user to configure the driver to operate by default in such a mode nor can the driver decide to move to this mode by default as it's user configuration-driven right now. While MultiPort E-Switch single FDB mode is the preferred mode, older generations of ConnectX hardware couldn't support this mode so it was never implemented. Now that there is capable hardware present, start the transition to having this mode by default. Introduce a devlink parameter to control MultiPort E-Switch single FDB mode. This will allow users to select this mode on their system right now and in the future will allow the driver to move to this mode by default. Example: $ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \ cmode runtime Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.

The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.

This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.

While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.

Introduce a devlink parameter to control MultiPort E-Switch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.

Example:
    $ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \
                  cmode runtime

Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Documentation: networking: correct spelling 2023-01-31T12:00:47+00:00 Randy Dunlap rdunlap@infradead.org 2023-01-29T23:10:48+00:00 a266ef69b890f099069cf51bb40572611c435a54 Correct spelling problems for Documentation/networking/ as reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Jiri Pirko <jiri@nvidia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20230129231053.20863-5-rdunlap@infradead.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
Correct spelling problems for Documentation/networking/ as reported
by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20230129231053.20863-5-rdunlap@infradead.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>