commit 4dca20efb1a9c2efefc28ad2867e5d6c3f5e1955 upstream.

A machine may need to invert the panel backlight brightness value. This
patch adds the infrastructure for a quirk to do so.

Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
[wml: Backported to 3.4:
- Adjust context
- one more flag QUIRK_NO_PCH_PWM_ENABLE]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7bd90909bbf9ce7c40e1da3d72b97b93839c188a upstream.

Following the documentation of the Legacy Backlight Brightness (LBB)
Register in the configuration space of some Intel PCI graphics adapters,
setting the LBB register with the value 0x0 causes the backlight to be
turned off, and 0xFF causes the backlight to be set to 100% intensity
(http://download.intel.com/embedded/processors/Whitepaper/324567.pdf).
The Acer Aspire 5734Z, however, turns the backlight off at 0xFF and sets
it to maximum intensity at 0. In consequence, the screen of this systems
becomes dark at an early boot stage which makes it unusable. The same
inversion applies to the BLC_PWM_CTL I915 register. This problem was
introduced in kernel version 2.6.38 when the PCI device of this system
was first supported by the i915 KMS module.

This patch adds a parameter to the i915 module to enable inversion of
the brightness variable (i915.invert_brightness).

Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8c58bf3eec3b8fc8162fe557e9361891c20758f2 upstream.

Using this parameter one can disable the storage_size/2 check if
he is really sure that the UEFI does sane gc and fulfills the spec.

This parameter is useful if a devices uses more than 50% of the
storage by default.
The Intel DQSW67 desktop board is such a sucker for exmaple.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a2fd6419174470f5ae6383f5037d0ee21ed9833f upstream.

Both the PowerPC hypervisor and Xen hypervisor can utilize the
hvc driver.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1361825650-14031-3-git-send-email-konrad.wilk@oracle.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2482a92e7d17187301d7313cfe5021b13393a0b4 upstream.

The earlyprintk for Xen PV guests utilizes a simple hypercall
(console_io) to provide output to Xen emergency console.

Note that the Xen hypervisor should be booted with 'loglevel=all'
to output said information.

Reported-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1361825650-14031-2-git-send-email-konrad.wilk@oracle.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull nfsd changes from Bruce Fields:

Highlights:
 - Benny Halevy and Tigran Mkrtchyan implemented some more 4.1 features,
   moving us closer to a complete 4.1 implementation.
 - Bernd Schubert fixed a long-standing problem with readdir cookies on
   ext2/3/4.
 - Jeff Layton performed a long-overdue overhaul of the server reboot
   recovery code which will allow us to deprecate the current code (a
   rather unusual user of the vfs), and give us some needed flexibility
   for further improvements.
 - Like the client, we now support numeric uid's and gid's in the
   auth_sys case, allowing easier upgrades from NFSv2/v3 to v4.x.

Plus miscellaneous bugfixes and cleanup.

Thanks to everyone!

There are also some delegation fixes waiting on vfs review that I
suppose will have to wait for 3.5.  With that done I think we'll finally
turn off the "EXPERIMENTAL" dependency for v4 (though that's mostly
symbolic as it's been on by default in distro's for a while).

And the list of 4.1 todo's should be achievable for 3.5 as well:

   http://wiki.linux-nfs.org/wiki/index.php/Server_4.0_and_4.1_issues

though we may still want a bit more experience with it before turning it
on by default.

* 'for-3.4' of git://linux-nfs.org/~bfields/linux: (55 commits)
  nfsd: only register cld pipe notifier when CONFIG_NFSD_V4 is enabled
  nfsd4: use auth_unix unconditionally on backchannel
  nfsd: fix NULL pointer dereference in cld_pipe_downcall
  nfsd4: memory corruption in numeric_name_to_id()
  sunrpc: skip portmap calls on sessions backchannel
  nfsd4: allow numeric idmapping
  nfsd: don't allow legacy client tracker init for anything but init_net
  nfsd: add notifier to handle mount/unmount of rpc_pipefs sb
  nfsd: add the infrastructure to handle the cld upcall
  nfsd: add a header describing upcall to nfsdcld
  nfsd: add a per-net-namespace struct for nfsd
  sunrpc: create nfsd dir in rpc_pipefs
  nfsd: add nfsd4_client_tracking_ops struct and a way to set it
  nfsd: convert nfs4_client->cl_cb_flags to a generic flags field
  NFSD: Fix nfs4_verifier memory alignment
  NFSD: Fix warnings when NFSD_DEBUG is not defined
  nfsd: vfs_llseek() with 32 or 64 bit offsets (hashes)
  nfsd: rename 'int access' to 'int may_flags' in nfsd_open()
  ext4: return 32/64-bit dir name hash according to usage type
  fs: add new FMODE flags: FMODE_32bithash and FMODE_64bithash
  ...

Mimic the client side by providing a module parameter that turns off
idmapping in the auth_sys case, for backwards compatibility with NFSv2
and NFSv3.

Unlike in the client case, we don't have any way to negotiate, since the
client can return an error to us if it doesn't like the id that we
return to it in (for example) a getattr call.

However, it has always been possible for servers to return numeric id's,
and as far as we're aware clients have always been able to handle them.

Also, in the auth_sys case clients already need to have numeric id's the
same between client and server.

Therefore we believe it's safe to default this to on; but the module
parameter is available to return to previous behavior if this proves to
be a problem in some unexpected setup.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Sometimes we need to test a kernel of same version with code or config
option changes.

We already have sysctl to disable module load, but add a kernel
parameter will be more convenient.

Since modules_disabled is int, so here use bint type in core_param.
TODO: make sysctl accept bool and change modules_disabled to bool

Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Pull miscellaneous Itanium patches from Tony Luck.

The conflicts in arch/ia64/hp/sim/simserial.c were due to patches to
simserial that had alredy been included (with lots of further cleanups)
in the serial tree.

* tag 'ia64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  Documentation/kernel-parameters: remove inttest parameter
  [IA64] Fix ISA IRQ trigger model and polarity setting
  [IA64] Fix a couple of warnings for EXPORT_SYMBOL
  [IA64] Check return from device_register() in cx_device_register()
  [IA64] Fix warning from machine_kexec.c
  [IA64] simserial, bail out when request_irq fails
  [IA64] hpsim, initialize chip for assigned irqs
  [IA64] simserial, include some headers
  [IA64] hpsim, fix SAL handling in fw-emu
  [IA64] genirq fixup for SGI/SN
  [IA64] disable interrupts when exiting from ia64_mca_cmc_int_handler()

Pull PCI changes (including maintainer change) from Jesse Barnes:
 "This pull has some good cleanups from Bjorn and Yinghai, as well as
  some more code from Yinghai to better handle resource re-allocation
  when enabled.

  There's also a new initcall_debug feature from Arjan which will print
  out quirk timing information to help identify slow quirks for fixing
  or refinement (Yinghai sent in a few patches to do just that once the
  new debug code landed).

  Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas.
  He's been a core PCI and Linux contributor for some time now, and has
  kindly volunteered to take over.  I just don't feel I have the time
  for PCI review and work that it deserves lately (I've taken on some
  other projects), and haven't been as responsive lately as I'd like, so
  I approached Bjorn asking if he'd like to manage things.  He's going
  to give it a try, and I'm confident he'll do at least as well as I
  have in keeping the tree managed, patches flowing, and keeping things
  stable."

Fix up some fairly trivial conflicts due to other cleanups (mips device
resource fixup cleanups clashing with list handling cleanup, ppc iseries
removal clashing with pci_probe_only cleanup etc)

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits)
  PCI: Bjorn gets PCI hotplug too
  PCI: hand PCI maintenance over to Bjorn Helgaas
  unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h
  sparc/PCI: convert devtree and arch-probed bus addresses to resource
  powerpc/PCI: allow reallocation on PA Semi
  powerpc/PCI: convert devtree bus addresses to resource
  powerpc/PCI: compute I/O space bus-to-resource offset consistently
  arm/PCI: don't export pci_flags
  PCI: fix bridge I/O window bus-to-resource conversion
  x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()'
  PCI / PCIe: Introduce command line option to disable ARI
  PCI: make acpihp use __pci_remove_bus_device instead
  PCI: export __pci_remove_bus_device
  PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge
  PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device
  PCI: print out PCI device info along with duration
  PCI: Move "pci reassigndev resource alignment" out of quirks.c
  PCI: Use class for quirk for usb host controller fixup
  PCI: Use class for quirk for ti816x class fixup
  PCI: Use class for quirk for intel e100 interrupt fixup
  ...