linux-stable.git/Documentation/hwmon, branch v5.2

hwmon: (lm75) Add support for TMP75B

2019-05-03T20:16:18+00:00

The TMP75B has a different control register, supports 12-bit
resolution and the default conversion rate is 37 Hz.

Signed-off-by: Iker Perez del Palomar Sustatxa 
Signed-off-by: Guenter Roeck

docs: hwmon: remove the extension from .rst files

2019-04-22T22:30:35+00:00

On almost all places, we're including ReST files without the
extension.

Let's remove the extension here	as well, in order to use just
one standard.

Suggested-by: Jani Nikula 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Guenter Roeck

docs: hwmon: convert three docs to ReST format

2019-04-22T22:27:27+00:00

Those three new drivers were missed on the initial conversion
to ReST format. So:

- Rename them to .rst;
- Add them to the hwmon index.rst index;
- add some blank lines at the "Supported systems:" part, in
  order to allow Sphinx to properly identify new lines,
  suppressing warnings and avoid it to output some random
  lines in bold;
- When multiple authors are involved, change the authors
  part to a list, in order to avoid adding blank lines.
- adjust the table cells (one of the tables seemed to be
  assuming that tab is 4 positions instead of 8) and add
  the table markup.
- be sure that the section markups have the same number of
  characters as the section title.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Guenter Roeck

hwmon: (ina3221) Add voltage conversion time settings

2019-04-18T13:44:11+00:00

The CONFIG register has two 3-bit fields for conversion time
settings of Bus-voltage and Shunt-voltage, respectively. The
conversion settings, along with averaging mode, allow users
to optimize available timing requirement.

This patch adds an 'update_interval' sysfs node through the
hwmon_chip_info of hwmon core. It reflects a total hardware
conversion time:
    samples * channels * (Bus + Shunt conversion times)

Though INA3221 supports different conversion time setups for
Bus and Shunt voltages, this patch only adds the support of
a unified setting for both conversion times, by dividing the
conversion time into two equal values.

Signed-off-by: Nicolin Chen 
[groeck: .rst related formatting changes in documentation]
Signed-off-by: Guenter Roeck

docs: hwmon: Add an index file and rename docs to *.rst

2019-04-17T17:37:23+00:00

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Guenter Roeck

docs: hwmon: convert remaining files to ReST format

2019-04-17T17:36:05+00:00

Convert all other hwmon files to ReST format, in order to allow
them to be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Guenter Roeck

docs: hwmon: misc files: convert to ReST format

2019-04-17T16:51:07+00:00

Convert other files maintained by Guenter to ReST format, in order
to allow them to be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Guenter Roeck

docs: hwmon: pmbus files: convert to ReST format

2019-04-17T16:51:06+00:00

Convert pmbus files to ReST format, in order to allow them to
be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Guenter Roeck

docs: hwmon: k8temp, w83793: convert to ReST format

2019-04-17T16:51:06+00:00

Convert k8temp and w83793 to ReST format, in order to allow them
to be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Guenter Roeck

docs: hwmon: da9052, da9055: convert to ReST format

2019-04-17T16:51:05+00:00

Convert da9052 and da9055 to ReST format, in order to allow
them to be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Guenter Roeck