Pull pwm updates from Thierry Reding: "This contains mostly various fixes, cleanups and some conversions to the atomic API. One noteworthy change is that PWM consumers can now pass a hint to the PWM core about the PWM usage, enabling PWM providers to implement various optimizations. There's also a fair bit of simplification here with the addition of some device-managed helpers as well as unification between the DT and ACPI firmware interfaces" * tag 'pwm/for-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (50 commits) pwm: Remove redundant assignment to pointer pwm pwm: ep93xx: Fix read of uninitialized variable ret pwm: ep93xx: Prepare clock before using it pwm: ep93xx: Unfold legacy callbacks into ep93xx_pwm_apply() pwm: ep93xx: Implement .apply callback pwm: vt8500: Only unprepare the clock after the pwmchip was removed pwm: vt8500: Drop if with an always false condition pwm: tegra: Assert reset only after the PWM was unregistered pwm: tegra: Don't needlessly enable and disable the clock in .remove() pwm: tegra: Don't modify HW state in .remove callback pwm: tegra: Drop an if block with an always false condition pwm: core: Simplify some devm_*pwm*() functions pwm: core: Remove unused devm_pwm_put() pwm: core: Unify fwnode checks in the module pwm: core: Reuse fwnode_to_pwmchip() in ACPI case pwm: core: Convert to use fwnode for matching docs: firmware-guide: ACPI: Add a PWM example dt-bindings: pwm: pwm-tiecap: Add compatible string for AM64 SoC dt-bindings: pwm: pwm-tiecap: Convert to json schema pwm: sprd: Don't check the return code of pwmchip_remove() ...
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
When PWM support for ACPI has been added into the kernel, it missed
the documentation update. Hence update documentation here.
Fixes: 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Document additional MAC configuration modes which can be processed by the existing fwnode_ phylink helpers: * "managed" standard ACPI _DSD property [1] * "fixed-link" data-only subnode linked in the _DSD package via generic mechanism of the hierarchical data extension [2] [1] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf [2] https://github.com/UEFI/DSD-Guide/blob/main/dsd-guide.pdf Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Use the '.. code-block:: none' to properly highlight the documented DSDT
entries. This also fixes warnings in the documentation build process.
Fixes: e71305acd81c ("Documentation: ACPI: DSD: Document MDIO PHY")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include the new phy.rst into the index of the ACPI support
documentation.
Fixes: e71305acd81c ("Documentation: ACPI: DSD: Document MDIO PHY")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The :doc:`foo` tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:`foo`. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/7162043c18f1ea96c446b332400e44e8087ba142.1623824363.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Introduce a mechanism based on generic ACPI _DSD device properties definition [1] to get PHYs registered on a MDIO bus and provide them to be connected to MAC. [1] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf Describe properties "phy-handle" and "phy-mode". Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Historically ACPI has no means of the GPIO polarity and thus the SPISerialBus() resource defines it on the per-chip basis. In order to avoid an ambiguity, the GPIO polarity is considered being always Active High. Add note about this to the respective documentation file. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop the definitions of the following symbols: ACPI_SBS_COMPONENT ACPI_FAN_COMPONENT ACPI_CONTAINER_COMPONENT ACPI_MEMORY_DEVICE_COMPONENT that are not used in a meaningful way any more and update the ACPI debug documentation to avoid confusing users by making the impression that the ACPICA debug can be used for anything other than ACPICA itself, which is incorrect. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com>