This adds a new helper function devm_spi_optimize_message() that
automatically registers spi_unoptimize_message() to be called
when the device is removed.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240621-devm_spi_optimize_message-v1-2-3f9dcba6e95e@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>

A few SPI devm_* helpers were missing from the devres documentation.
This patch adds them.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240621-devm_spi_optimize_message-v1-1-3f9dcba6e95e@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>

A common use case for regulators is to supply a reference voltage to an
analog input or output device. This adds a new devres API to get,
enable, and get the voltage in a single call. This allows eliminating
boilerplate code in drivers that use reference supplies in this way.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-1-b1f11ab766c1@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull spi updates from Mark Brown:
 "This release sees some exciting changes from David Lechner which
  implements some optimisations that have been talked about for a long
  time which allows client drivers to pre-prepare SPI messages for
  repeated or low latency use. This lets us move work out of latency
  sensitive paths and avoid repeating work for frequently performed
  operations. As well as being useful in itself this will also be used
  in future to allow controllers to directly trigger SPI operations (eg,
  from interrupts).

  Otherwise this release has mostly been focused on cleanups, plus a
  couple of new devices:

   - Support for pre-optimising messages

   - A big set of updates from Uwe Kleine-König moving drivers to use
     APIs with more modern terminology for controllers

   - Major overhaul of the s3c64xx driver

   - Support for Google GS101 and Samsung Exynos850"

* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
  spi: Introduce SPI_INVALID_CS and is_valid_cs()
  spi: Fix types of the last chip select storage variables
  spi: Consistently use BIT for cs_index_mask
  spi: Exctract spi_dev_check_cs() helper
  spi: Exctract spi_set_all_cs_unused() helper
  spi: s3c64xx: switch exynos850 to new port config data
  spi: s3c64xx: switch gs101 to new port config data
  spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
  spi: s3c64xx: get rid of the OF alias ID dependency
  spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
  spi: s3c64xx: let the SPI core determine the bus number
  spi: s3c64xx: allow FIFO depth to be determined from the compatible
  spi: s3c64xx: retrieve the FIFO depth from the device tree
  spi: s3c64xx: determine the fifo depth only once
  spi: s3c64xx: allow full FIFO masks
  spi: s3c64xx: define a magic value
  spi: dt-bindings: introduce FIFO depth properties
  spi: axi-spi-engine: use struct_size() macro
  spi: axi-spi-engine: use __counted_by() attribute
  spi: axi-spi-engine: remove p from struct spi_engine_message_state
  ...

This function allocates a struct pwm_chip and driver data. Compared to
the status quo the split into pwm_chip and driver data is new, otherwise
it doesn't change anything relevant (yet).

The intention is that after all drivers are switched to use this
allocation function, its possible to add a struct device to struct
pwm_chip to properly track the latter's lifetime without touching all
drivers again. Proper lifetime tracking is a necessary precondition to
introduce character device support for PWMs (that implements atomic
setting and doesn't suffer from the sysfs overhead of the /sys/class/pwm
userspace support).

The new function pwmchip_priv() (obviously?) only works for chips
allocated with pwmchip_alloc().

Link: https://lore.kernel.org/r/9577d6053a5a52536057dc8654ff567181c2da82.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Now that all in-tree users followed the rename, the compat stuff can go
away.  This completes the renaming started with commit 8caab75fd2c2
("spi: Generalize SPI "master" to "controller"")

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/ad1d949325b61a4682e8d6ecf9d05da751e6a99f.1707324794.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

There were many changes to PCI core in scope of managed resources APIs.
Update documentation to list the current state of affairs.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231006150634.3444251-1-andriy.shevchenko@linux.intel.com

There is no krealloc_array equivalent in devres. Users would have to
do their own multiplication overflow check so provide one.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20230509094942.396150-2-james.clark@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull dmaengine updates from Vinod Koul:
 "New support:

    - Qualcomm SDM670, SM6115 and SM6375 GPI controller support

    - Ingenic JZ4755 dmaengine support

    - Removal of iop-adma driver

  Updates:

   - Tegra support for dma-channel-mask

   - at_hdmac cleanup and virt-chan support for this driver"

* tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits)
  dmaengine: Revert "dmaengine: remove s3c24xx driver"
  dmaengine: tegra: Add support for dma-channel-mask
  dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA
  dmaengine: idxd: Remove linux/msi.h include
  dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375
  dmaengine: idxd: Fix crc_val field for completion record
  dmaengine: at_hdmac: Convert driver to use virt-dma
  dmaengine: at_hdmac: Remove unused member of at_dma_chan
  dmaengine: at_hdmac: Rename "chan_common" to "dma_chan"
  dmaengine: at_hdmac: Rename "dma_common" to "dma_device"
  dmaengine: at_hdmac: Use bitfield access macros
  dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c
  dmaengine: at_hdmac: Set include entries in alphabetic order
  dmaengine: at_hdmac: Use pm_ptr()
  dmaengine: at_hdmac: Use devm_clk_get()
  dmaengine: at_hdmac: Use devm_platform_ioremap_resource
  dmaengine: at_hdmac: Use devm_kzalloc() and struct_size()
  dmaengine: at_hdmac: Introduce atc_get_llis_residue()
  dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue
  dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts
  ...

Pull driver core updates from Greg KH:
 "Here is the set of driver core and kernfs changes for 6.2-rc1.

  The "big" change in here is the addition of a new macro,
  container_of_const() that will preserve the "const-ness" of a pointer
  passed into it.

  The "problem" of the current container_of() macro is that if you pass
  in a "const *", out of it can comes a non-const pointer unless you
  specifically ask for it. For many usages, we want to preserve the
  "const" attribute by using the same call. For a specific example, this
  series changes the kobj_to_dev() macro to use it, allowing it to be
  used no matter what the const value is. This prevents every subsystem
  from having to declare 2 different individual macros (i.e.
  kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
  the const value at build time, which having 2 macros would not do
  either.

  The driver for all of this have been discussions with the Rust kernel
  developers as to how to properly mark driver core, and kobject,
  objects as being "non-mutable". The changes to the kobject and driver
  core in this pull request are the result of that, as there are lots of
  paths where kobjects and device pointers are not modified at all, so
  marking them as "const" allows the compiler to enforce this.

  So, a nice side affect of the Rust development effort has been already
  to clean up the driver core code to be more obvious about object
  rules.

  All of this has been bike-shedded in quite a lot of detail on lkml
  with different names and implementations resulting in the tiny version
  we have in here, much better than my original proposal. Lots of
  subsystem maintainers have acked the changes as well.

  Other than this change, included in here are smaller stuff like:

   - kernfs fixes and updates to handle lock contention better

   - vmlinux.lds.h fixes and updates

   - sysfs and debugfs documentation updates

   - device property updates

  All of these have been in the linux-next tree for quite a while with
  no problems"

* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
  device property: Fix documentation for fwnode_get_next_parent()
  firmware_loader: fix up to_fw_sysfs() to preserve const
  usb.h: take advantage of container_of_const()
  device.h: move kobj_to_dev() to use container_of_const()
  container_of: add container_of_const() that preserves const-ness of the pointer
  driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
  driver core: fix up missed scsi/cxlflash class.devnode() conversion.
  driver core: fix up some missing class.devnode() conversions.
  driver core: make struct class.devnode() take a const *
  driver core: make struct class.dev_uevent() take a const *
  cacheinfo: Remove of_node_put() for fw_token
  device property: Add a blank line in Kconfig of tests
  device property: Rename goto label to be more precise
  device property: Move PROPERTY_ENTRY_BOOL() a bit down
  device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
  kernfs: fix all kernel-doc warnings and multiple typos
  driver core: pass a const * into of_device_uevent()
  kobject: kset_uevent_ops: make name() callback take a const *
  kobject: kset_uevent_ops: make filter() callback take a const *
  kobject: make kobject_namespace take a const *
  ...