linux-stable.git/Documentation/driver-api/driver-model/devres.rst, branch v5.13 Linux kernel stable tree Merge tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2021-04-26T19:30:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-04-26T19:30:36+00:00 0c855563182001c829065faa17f8e29e9ceffe13 Pull ARM Apple M1 platform support from Arnd Bergmann: "The Apple M1 is the processor used it all current generation Apple Macintosh computers. Support for this platform so far is rudimentary, but it boots and can use framebuffer and serial console over a special USB cable. Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe) is work in progress but was not ready in time. A very detailed description of what works is in the commit message of commit 1bb2fd3880d4 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the AsahiLinux wiki" Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/ * tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: asm-generic/io.h: Unbork ioremap_np() declaration arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree dt-bindings: display: Add apple,simple-framebuffer arm64: Kconfig: Introduce CONFIG_ARCH_APPLE irqchip/apple-aic: Add support for the Apple Interrupt Controller dt-bindings: interrupt-controller: Add DT bindings for apple-aic arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h of/address: Add infrastructure to declare MMIO as non-posted asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np arm64: Implement ioremap_np() to map MMIO as nGnRnE docs: driver-api: device-io: Document ioremap() variants & access funcs docs: driver-api: device-io: Document I/O access functions asm-generic/io.h: Add a non-posted variant of ioremap() arm64: arch_timer: Implement support for interrupt-names dt-bindings: timer: arm,arch_timer: Add interrupt-names support arm64: cputype: Add CPU implementor & types for the Apple M1 cores dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles dt-bindings: arm: apple: Add bindings for Apple ARM platforms dt-bindings: vendor-prefixes: Add apple prefix 
Pull ARM Apple M1 platform support from Arnd Bergmann:
 "The Apple M1 is the processor used it all current generation Apple
  Macintosh computers. Support for this platform so far is rudimentary,
  but it boots and can use framebuffer and serial console over a special
  USB cable.

  Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
  is work in progress but was not ready in time.

  A very detailed description of what works is in the commit message of
  commit 1bb2fd3880d4 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the
  AsahiLinux wiki"

Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/

* tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  asm-generic/io.h: Unbork ioremap_np() declaration
  arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree
  dt-bindings: display: Add apple,simple-framebuffer
  arm64: Kconfig: Introduce CONFIG_ARCH_APPLE
  irqchip/apple-aic: Add support for the Apple Interrupt Controller
  dt-bindings: interrupt-controller: Add DT bindings for apple-aic
  arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h
  of/address: Add infrastructure to declare MMIO as non-posted
  asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np
  arm64: Implement ioremap_np() to map MMIO as nGnRnE
  docs: driver-api: device-io: Document ioremap() variants & access funcs
  docs: driver-api: device-io: Document I/O access functions
  asm-generic/io.h:  Add a non-posted variant of ioremap()
  arm64: arch_timer: Implement support for interrupt-names
  dt-bindings: timer: arm,arch_timer: Add interrupt-names support
  arm64: cputype: Add CPU implementor & types for the Apple M1 cores
  dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles
  dt-bindings: arm: apple: Add bindings for Apple ARM platforms
  dt-bindings: vendor-prefixes: Add apple prefix
asm-generic/io.h: Add a non-posted variant of ioremap() 2021-04-08T11:18:38+00:00 Hector Martin marcan@marcan.st 2021-02-11T12:35:46+00:00 7c566bb5e4d5fb0d89579a90d8a1f54eaff6f95d ARM64 currently defaults to posted MMIO (nGnRE), but some devices require the use of non-posted MMIO (nGnRnE). Introduce a new ioremap() variant to handle this case. ioremap_np() returns NULL on arches that do not implement this variant. sparc64 is the only architecture that needs to be touched directly, because it includes neither of the generic io.h or iomap.h headers. This adds the IORESOURCE_MEM_NONPOSTED flag, which maps to this variant and marks a given resource as requiring non-posted mappings. This is implemented in the resource system because it is a SoC-level requirement, so existing drivers do not need special-case code to pick this ioremap variant. Then this is implemented in devres by introducing devm_ioremap_np(), and making devm_ioremap_resource() automatically select this variant when the resource has the IORESOURCE_MEM_NONPOSTED flag set. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st> 
ARM64 currently defaults to posted MMIO (nGnRE), but some devices
require the use of non-posted MMIO (nGnRnE). Introduce a new ioremap()
variant to handle this case. ioremap_np() returns NULL on arches that
do not implement this variant.

sparc64 is the only architecture that needs to be touched directly,
because it includes neither of the generic io.h or iomap.h headers.

This adds the IORESOURCE_MEM_NONPOSTED flag, which maps to this
variant and marks a given resource as requiring non-posted mappings.
This is implemented in the resource system because it is a SoC-level
requirement, so existing drivers do not need special-case code to pick
this ioremap variant.

Then this is implemented in devres by introducing devm_ioremap_np(),
and making devm_ioremap_resource() automatically select this variant
when the resource has the IORESOURCE_MEM_NONPOSTED flag set.

Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
iio: buffer-dma,adi-axi-adc: introduce devm_iio_dmaengine_buffer_setup() 2021-03-11T20:47:02+00:00 Alexandru Ardelean alexandru.ardelean@analog.com 2021-02-15T10:40:25+00:00 a02c09e42b3ed6cefae671e302835f1f04bf474e This change does a conversion of the devm_iio_dmaengine_buffer_alloc() to devm_iio_dmaengine_buffer_setup(). This will allocate an IIO DMA buffer and attach it to the IIO device, similar to devm_iio_triggered_buffer_setup() (though the underlying code is different, the final logic is the same). Since the only user of the devm_iio_dmaengine_buffer_alloc() was the adi-axi-adc driver, this change does the replacement in a single go in the driver. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210215104043.91251-7-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
This change does a conversion of the devm_iio_dmaengine_buffer_alloc() to
devm_iio_dmaengine_buffer_setup(). This will allocate an IIO DMA buffer and
attach it to the IIO device, similar to devm_iio_triggered_buffer_setup()
(though the underlying code is different, the final logic is the same).

Since the only user of the devm_iio_dmaengine_buffer_alloc() was the
adi-axi-adc driver, this change does the replacement in a single go in the
driver.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210215104043.91251-7-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: kfifo: un-export devm_iio_kfifo_allocate() function 2021-03-11T20:47:01+00:00 Alexandru Ardelean alexandru.ardelean@analog.com 2021-02-15T10:40:24+00:00 99f6e8215b627730e2e6d371430a1f81e8ed6c27 At this point all drivers should use devm_iio_kfifo_buffer_setup() instead of manually allocating via devm_iio_kfifo_allocate() and assigning ops and modes. With this change, the devm_iio_kfifo_allocate() will be made private to the IIO core, since all drivers should call either devm_iio_kfifo_buffer_setup() or devm_iio_triggered_buffer_setup() to create a kfifo buffer. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210215104043.91251-6-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
At this point all drivers should use devm_iio_kfifo_buffer_setup() instead
of manually allocating via devm_iio_kfifo_allocate() and assigning ops and
modes.

With this change, the devm_iio_kfifo_allocate() will be made private to the
IIO core, since all drivers should call either
devm_iio_kfifo_buffer_setup() or devm_iio_triggered_buffer_setup() to
create a kfifo buffer.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210215104043.91251-6-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: kfifo: add devm_iio_kfifo_buffer_setup() helper 2021-03-11T20:47:01+00:00 Alexandru Ardelean alexandru.ardelean@analog.com 2021-02-15T10:40:21+00:00 e36db6a06937c6fce3291f0c362d4f757b8ec703 This change adds the devm_iio_kfifo_buffer_setup() helper/short-hand, which groups the simple routine of allocating a kfifo buffers via devm_iio_kfifo_allocate() and calling iio_device_attach_buffer(). The mode_flags parameter is required, as the IIO kfifo supports 2 modes: INDIO_BUFFER_SOFTWARE & INDIO_BUFFER_TRIGGERED. The setup_ops parameter is optional. This function will be a bit more useful when needing to define multiple buffers per IIO device. The naming for this function has been inspired from iio_triggered_buffer_setup() since that one does a kfifo alloc + a pollfunc alloc. So, this should have a more familiar ring to what it is. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210215104043.91251-3-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
This change adds the devm_iio_kfifo_buffer_setup() helper/short-hand,
which groups the simple routine of allocating a kfifo buffers via
devm_iio_kfifo_allocate() and calling iio_device_attach_buffer().

The mode_flags parameter is required, as the IIO kfifo supports 2 modes:
INDIO_BUFFER_SOFTWARE & INDIO_BUFFER_TRIGGERED.
The setup_ops parameter is optional.

This function will be a bit more useful when needing to define multiple
buffers per IIO device.

The naming for this function has been inspired from
iio_triggered_buffer_setup() since that one does a kfifo alloc + a pollfunc
alloc. So, this should have a more familiar ring to what it is.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210215104043.91251-3-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
rtc: rework rtc_register_device() resource management 2020-11-19T11:50:12+00:00 Bartosz Golaszewski bgolaszewski@baylibre.com 2020-11-09T16:34:08+00:00 fdcfd854333be5b30377dc5daa9cd0fa1643a979 rtc_register_device() is a managed interface but it doesn't use devres by itself - instead it marks an rtc_device as "registered" and the devres callback for devm_rtc_allocate_device() takes care of resource release. This doesn't correspond with the design behind devres where managed structures should not be aware of being managed. The correct solution here is to register a separate devres callback for unregistering the device. While at it: rename rtc_register_device() to devm_rtc_register_device() and add it to the list of managed interfaces in devres.rst. This way we can avoid any potential confusion of driver developers who may expect there to exist a corresponding unregister function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl 
rtc_register_device() is a managed interface but it doesn't use devres
by itself - instead it marks an rtc_device as "registered" and the devres
callback for devm_rtc_allocate_device() takes care of resource release.

This doesn't correspond with the design behind devres where managed
structures should not be aware of being managed. The correct solution
here is to register a separate devres callback for unregistering the
device.

While at it: rename rtc_register_device() to devm_rtc_register_device()
and add it to the list of managed interfaces in devres.rst. This way we
can avoid any potential confusion of driver developers who may expect
there to exist a corresponding unregister function.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl
rtc: add devm_ prefix to rtc_nvmem_register() 2020-11-19T11:50:11+00:00 Bartosz Golaszewski bgolaszewski@baylibre.com 2020-11-09T16:34:06+00:00 3a905c2d9544a418953d6c18668f0f853fbd9be9 rtc_nvmem_register() is a managed interface. It doesn't require any release function to be called at driver detach. To avoid confusing driver authors, let's rename it to devm_rtc_nvmem_register() and add it to the list of managed interfaces in Documentation/. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201109163409.24301-6-brgl@bgdev.pl 
rtc_nvmem_register() is a managed interface. It doesn't require any
release function to be called at driver detach. To avoid confusing
driver authors, let's rename it to devm_rtc_nvmem_register() and add it
to the list of managed interfaces in Documentation/.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201109163409.24301-6-brgl@bgdev.pl
Documentation: list RTC devres helpers in devres.rst 2020-11-19T11:50:11+00:00 Bartosz Golaszewski bgolaszewski@baylibre.com 2020-11-09T16:34:04+00:00 4d49ffc7a20dd0b05efb82fbf5b52d7aa57e9f4b It's customary to list all devres helpers in devres.rst. Add missing RTC routines. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201109163409.24301-4-brgl@bgdev.pl 
It's customary to list all devres helpers in devres.rst. Add missing RTC
routines.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201109163409.24301-4-brgl@bgdev.pl
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm 2020-10-15T17:46:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-15T17:46:16+00:00 93b694d096cc10994c817730d4d50288f9ae3d66 Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ... 
Pull drm updates from Dave Airlie:
 "Not a major amount of change, the i915 trees got split into display
  and gt trees to better facilitate higher level review, and there's a
  major refactoring of i915 GEM locking to use more core kernel concepts
  (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
  get DC support, nouveau got a bump in displayport support with common
  code extraction from i915.

  Outside of drm this contains a couple of patches for hexint
  moduleparams which you've acked, and a virtio common code tree that
  you should also get via it's regular path.

  New driver:
   - Cadence MHDP8546 DisplayPort bridge driver

  core:
   - cross-driver scatterlist cleanups
   - devm_drm conversions
   - remove drm_dev_init
   - devm_drm_dev_alloc conversion

  ttm:
   - lots of refactoring and cleanups

  bridges:
   - chained bridge support in more drivers

  panel:
   - misc new panels

  scheduler:
   - cleanup priority levels

  displayport:
   - refactor i915 code into helpers for nouveau

  i915:
   - split into display and GT trees
   - WW locking refactoring in GEM
   - execbuf2 extension mechanism
   - syncobj timeline support
   - GEN 12 HOBL display powersaving
   - Rocket Lake display additions
   - Disable FBC on Tigerlake
   - Tigerlake Type-C + DP improvements
   - Hotplug interrupt refactoring

  amdgpu:
   - Sienna Cichlid updates
   - Navy Flounder updates
   - DCE6 (SI) support for DC
   - Plane rotation enabled
   - TMZ state info ioctl
   - PCIe DPC recovery support
   - DC interrupt handling refactor
   - OLED panel fixes

  amdkfd:
   - add SMI events for thermal throttling
   - SMI interface events ioctl update
   - process eviction counters

  radeon:
   - move to dma_ for allocations
   - expose sclk via sysfs

  msm:
   - DSI support for sm8150/sm8250
   - per-process GPU pagetable support
   - Displayport support

  mediatek:
   - move HDMI phy driver to PHY
   - convert mtk-dpi to bridge API
   - disable mt2701 tmds

  tegra:
   - bridge support

  exynos:
   - misc cleanups

  vc4:
   - dual display cleanups

  ast:
   - cleanups

  gma500:
   - conversion to GPIOd API

  hisilicon:
   - misc reworks

  ingenic:
   - clock handling and format improvements

  mcde:
   - DSI support

  mgag200:
   - desktop g200 support

  mxsfb:
   - i.MX7 + i.MX8M
   - alpha plane support

  panfrost:
   - devfreq support
   - amlogic SoC support

  ps8640:
   - EDID from eDP retrieval

  tidss:
   - AM65xx YUV workaround

  virtio:
   - virtio-gpu exported resources

  rcar-du:
   - R8A7742, R8A774E1 and R8A77961 support
   - YUV planar format fixes
   - non-visible plane handling
   - VSP device reference count fix
   - Kconfig fix to avoid displaying disabled options in .config"

* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
  drm/ingenic: Fix bad revert
  drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
  drm/amdgpu: Remove warning for virtual_display
  drm/amdgpu: kfd_initialized can be static
  drm/amd/pm: setup APU dpm clock table in SMU HW initialization
  drm/amdgpu: prevent spurious warning
  drm/amdgpu/swsmu: fix ARC build errors
  drm/amd/display: Fix OPTC_DATA_FORMAT programming
  drm/amd/display: Don't allow pstate if no support in blank
  drm/panfrost: increase readl_relaxed_poll_timeout values
  MAINTAINERS: Update entry for st7703 driver after the rename
  Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
  drm/amd/display: HDMI remote sink need mode validation for Linux
  drm/amd/display: Change to correct unit on audio rate
  drm/amd/display: Avoid set zero in the requested clk
  drm/amdgpu: align frag_end to covered address space
  drm/amdgpu: fix NULL pointer dereference for Renoir
  drm/vmwgfx: fix regression in thp code due to ttm init refactor.
  drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
  drm/amdgpu/swsmu: add interrupt work function
  ...
devres: provide devm_krealloc() 2020-09-08T11:32:06+00:00 Bartosz Golaszewski bgolaszewski@baylibre.com 2020-08-24T17:38:57+00:00 f82485722e5de5ebb08d3a1dd7302203346dbff9 Implement the managed variant of krealloc(). This function works with all memory allocated by devm_kmalloc() (or devres functions using it implicitly like devm_kmemdup(), devm_kstrdup() etc.). Managed realloc'ed chunks can be manually released with devm_kfree(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200824173859.4910-2-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Implement the managed variant of krealloc(). This function works with
all memory allocated by devm_kmalloc() (or devres functions using it
implicitly like devm_kmemdup(), devm_kstrdup() etc.).

Managed realloc'ed chunks can be manually released with devm_kfree().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200824173859.4910-2-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>