Pull i2c fixes from Wolfram Sang:
 "Nothing fancy. Two driver and one DT binding fix"

* tag 'i2c-for-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycle
  i2c: qup: Add missing unwind goto in qup_i2c_probe()
  dt-bindings: i2c: opencores: Add missing type for "regstep"

Pull ARM SoC fixes from Arnd Bergmann:
 "The final bug fixes for Qualcomm and Rockchips came in, all of them
  for devicetree files:

   - Devices on Qualcomm SC7180/SC7280 that are cache coherent are now
     marked so correctly to fix a regression after a change in kernel
     behavior

   - Rockchips has a few minor changes for correctness of regulator and
     cache properties, as well as fixes for incorrect behavior of the
     RK3568 PCI controller and reset pins on two boards"

* tag 'arm-fixes-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
  dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
  arm64: dts: rockchip: Fix rk356x PCIe register and range mappings
  arm64: dts: rockchip: fix button reset pin for nanopi r5c
  arm64: dts: rockchip: fix nEXTRST on SOQuartz
  arm64: dts: rockchip: add missing cache properties
  arm64: dts: rockchip: fix USB regulator on ROCK64

One last Qualcomm ARM64 DeviceTree fix for v6.4

Changes related to cache management for DMA memory caused WiFi to stop
work on SC7180 and SC7280 based products, using TF-A. These changes
marks the relevant device dma-coherent to correct the behavior.

* tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
  dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent

Link: https://lore.kernel.org/r/20230622203248.106422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

"regstep" may be deprecated, but it still needs a type.

Fixes: 8ad69f490516 ("dt-bindings: i2c: convert ocores binding to yaml")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Trogdor devices use firmware backed by TF-A instead of Qualcomm's
normal TZ. On TF-A we end up mapping memory as cacheable. Specifically,
you can see in Trogdor's TF-A code [1] in qti_sip_mem_assign() that we
call qti_mmap_add_dynamic_region() with MT_RO_DATA. This translates
down to MT_MEMORY instead of MT_NON_CACHEABLE or MT_DEVICE.

Let's allow devices like trogdor to be described properly by allowing
"dma-coherent" in the SCM node.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230616081440.v2.1.Ie79b5f0ed45739695c9970df121e11d724909157@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Pull devicetree fixes from Rob Herring:

 - Fix missing of_node_put() in init_overlay_changeset()

 - Fix schema for qcom,pmic-mpp "qcom,paired" property

 - Fix 'additionalProperties' in silvaco,i3c-master binding

 - usage-model.rst: Use documented "arm,primecell" compatible string

 - Update Damien Le Moal's email address

 - Fixes in Realtek Bluetooth binding

* tag 'devicetree-fixes-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: qcom,pmic-mpp: Fix schema for "qcom,paired"
  dt-bindings: i3c: silvaco,i3c-master: fix missing schema restriction
  of: overlay: Fix missing of_node_put() in error case of init_overlay_changeset()
  docs: zh_CN/devicetree: sync usage-model fix
  docs: dt: fix documented Primecell compatible string
  dt-bindings: Change Damien Le Moal's contact email
  dt-bindings: net: realtek-bluetooth: Fix double RTL8723CS in desc
  dt-bindings: net: realtek-bluetooth: Fix RTL8821CS binding

The "qcom,paired" schema is all wrong. First, it's a list rather than an
object(dictionary). Second, it is missing a required type. The meta-schema
normally catches this, but schemas under "$defs" was not getting checked.
A fix for that is pending.

Fixes: f9a06b810951 ("dt-bindings: pinctrl: qcom,pmic-mpp: Convert qcom pmic mpp bindings to YAML")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418150606.1528107-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of the changes this time are for the Qualcomm Snapdragon
  platforms.

  There are bug fixes for error handling in Qualcomm icc-bwmon,
  rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
  firmware driver and a missing initialization in the Arm ff-a firmware
  driver. The Qualcomm RPMh and EDAC drivers need some rework to work
  correctly on all supported chips.

  The DT fixes include:

   - i.MX8 fixes for gpio, pinmux and clock settings

   - ADS touchscreen gpio polarity settings in several machines

   - Address dtb warnings for caches, panel and input-enable properties
     on Qualcomm platforms

   - Incorrect data on qualcomm platforms fir SA8155P power domains,
     SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire

   - Remoteproc firmware paths are corrected for Sony Xperia 10 IV"

* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
  firmware: arm_ffa: Set handle field to zero in memory descriptor
  ARM: dts: Fix erroneous ADS touchscreen polarities
  arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
  arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
  arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
  EDAC/qcom: Get rid of hardcoded register offsets
  EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
  arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
  dt-bindings: cache: qcom,llcc: Fix SM8550 description
  arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
  arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
  soc: qcom: rpmhpd: Add SA8155P power domains
  arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
  dt-bindings: power: qcom,rpmpd: Add SA8155P
  soc: qcom: Rename ice to qcom_ice to avoid module name conflict
  soc: qcom: rmtfs: Fix error code in probe()
  soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
  ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
  ARM: at91: pm: fix imbalanced reference counter for ethernet devices
  arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
  ...

Each device schema must end with unevaluatedProperties: false, if it
references other common schema.  Otherwise it would allow any properties
to be listed.

Fixes: b8b0446f1f1a ("dt-bindings: i3c: Describe Silvaco master binding")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230609141107.66128-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

Only arm,primecell is documented as compatible string for Primecell
peripherals. Current code agrees with that.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/9e137548c4e76e0d8deef6d49460cb37897934ca.1682333574.git.baruch@tkos.co.il
Signed-off-by: Rob Herring <robh@kernel.org>