<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/Documentation/devicetree, branch v6.18.32</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>media: dt-bindings: rockchip,vdec: Mark reg-names required for RK35{76,88}</title>
<updated>2026-05-17T15:15:27+00:00</updated>
<author>
<name>Cristian Ciocaltea</name>
<email>cristian.ciocaltea@collabora.com</email>
</author>
<published>2026-03-04T21:00:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6261d5fd172b86ff331f9cd79d8113165bffc1dd'/>
<id>6261d5fd172b86ff331f9cd79d8113165bffc1dd</id>
<content type='text'>
commit a11db8d8b403eba1f82728f440727128e9997edd upstream.

The Rockchip Video Decoder driver expects reg-names to be mandatory for
RK3576 and RK3588 SoCs, however the binding does not currently require
the use of them.

As a consequence, driver would fail to probe with a hypothetical
devicetree that doesn't provide the reg-names for these SoCs, but which
is otherwise a perfectly valid DT from the binding perspective.

Update the binding and make reg-names required for the aforementioned
SoCs.  While this change introduces an ABI break, the expected impact on
potential users would be minimal, if any, since the old SoCs are
unaffected, while the video decoder support for these newer variants in
mainline driver and devicetrees hasn't been released yet.

Moreover, this is also a prerequisite for a subsequent binding update
introducing an alternative reg-names order, according to the
address-based listing in the vendor's datasheet.

Reported-by: Conor Dooley &lt;conor@kernel.org&gt;
Closes: https://lore.kernel.org/all/20260227-urologist-gratitude-7984733f2d41@spud/
Fixes: c6ffb7e1fb90 ("media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings")
Fixes: a5c4a6526476 ("media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings")
Cc: stable@vger.kernel.org
Signed-off-by: Cristian Ciocaltea &lt;cristian.ciocaltea@collabora.com&gt;
Acked-by: Conor Dooley &lt;conor.dooley@microchip.com&gt;
Reviewed-by: Nicolas Dufresne &lt;nicolas.dufresne@collabora.com&gt;
Signed-off-by: Nicolas Dufresne &lt;nicolas.dufresne@collabora.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a11db8d8b403eba1f82728f440727128e9997edd upstream.

The Rockchip Video Decoder driver expects reg-names to be mandatory for
RK3576 and RK3588 SoCs, however the binding does not currently require
the use of them.

As a consequence, driver would fail to probe with a hypothetical
devicetree that doesn't provide the reg-names for these SoCs, but which
is otherwise a perfectly valid DT from the binding perspective.

Update the binding and make reg-names required for the aforementioned
SoCs.  While this change introduces an ABI break, the expected impact on
potential users would be minimal, if any, since the old SoCs are
unaffected, while the video decoder support for these newer variants in
mainline driver and devicetrees hasn't been released yet.

Moreover, this is also a prerequisite for a subsequent binding update
introducing an alternative reg-names order, according to the
address-based listing in the vendor's datasheet.

Reported-by: Conor Dooley &lt;conor@kernel.org&gt;
Closes: https://lore.kernel.org/all/20260227-urologist-gratitude-7984733f2d41@spud/
Fixes: c6ffb7e1fb90 ("media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings")
Fixes: a5c4a6526476 ("media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings")
Cc: stable@vger.kernel.org
Signed-off-by: Cristian Ciocaltea &lt;cristian.ciocaltea@collabora.com&gt;
Acked-by: Conor Dooley &lt;conor.dooley@microchip.com&gt;
Reviewed-by: Nicolas Dufresne &lt;nicolas.dufresne@collabora.com&gt;
Signed-off-by: Nicolas Dufresne &lt;nicolas.dufresne@collabora.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>media: dt-bindings: rockchip,vdec: Add alternative reg-names order for RK35{76,88}</title>
<updated>2026-05-17T15:15:26+00:00</updated>
<author>
<name>Cristian Ciocaltea</name>
<email>cristian.ciocaltea@collabora.com</email>
</author>
<published>2026-03-04T21:00:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=361e66fb431d905f9ec754f40ccff982fb5e90ed'/>
<id>361e66fb431d905f9ec754f40ccff982fb5e90ed</id>
<content type='text'>
commit 35c8178ed2bd9821a75a406d762b2f2e161f9c70 upstream.

With the introduction of the RK3588 SoC, and RK3576 afterwards, three
register blocks have been provided for the video decoder unit instead of
just one, which are further referenced in vendor's datasheet by 'link
table', 'function' and 'cache'.  The former is present at the top of the
listing, starting at video decoder unit base address.

However, while documenting RK3588, the binding broke the convention
expecting the unit address to indicate the start of the primary register
range, i.e. the 'function' block got listed before the 'link' one.

Since the binding changes have been already released and a fix would
bring up an ABI break, mark the current 'reg-names' ordering as
deprecated and introduce an alternative 'link,function,cache' listing
which follows the address-based ordering according to the TRM.

Additionally, drop the 'reg' description items as the order is not fixed
anymore, while the information they offer is not very relevant anyway.

It's worth noting there are currently no (known) users impacted by these
binding changes, since the video decoder support for the aforementioned
SoCs in mainline driver and devicetrees hasn't been released yet - it
landed in v7.0-rc1 while all DTS updates resulting from this will be
handled before v7.0 is out.

Fixes: c6ffb7e1fb90 ("media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings")
Fixes: a5c4a6526476 ("media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Dufresne &lt;nicolas.dufresne@collabora.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Signed-off-by: Cristian Ciocaltea &lt;cristian.ciocaltea@collabora.com&gt;
Signed-off-by: Nicolas Dufresne &lt;nicolas.dufresne@collabora.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 35c8178ed2bd9821a75a406d762b2f2e161f9c70 upstream.

With the introduction of the RK3588 SoC, and RK3576 afterwards, three
register blocks have been provided for the video decoder unit instead of
just one, which are further referenced in vendor's datasheet by 'link
table', 'function' and 'cache'.  The former is present at the top of the
listing, starting at video decoder unit base address.

However, while documenting RK3588, the binding broke the convention
expecting the unit address to indicate the start of the primary register
range, i.e. the 'function' block got listed before the 'link' one.

Since the binding changes have been already released and a fix would
bring up an ABI break, mark the current 'reg-names' ordering as
deprecated and introduce an alternative 'link,function,cache' listing
which follows the address-based ordering according to the TRM.

Additionally, drop the 'reg' description items as the order is not fixed
anymore, while the information they offer is not very relevant anyway.

It's worth noting there are currently no (known) users impacted by these
binding changes, since the video decoder support for the aforementioned
SoCs in mainline driver and devicetrees hasn't been released yet - it
landed in v7.0-rc1 while all DTS updates resulting from this will be
handled before v7.0 is out.

Fixes: c6ffb7e1fb90 ("media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings")
Fixes: a5c4a6526476 ("media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Dufresne &lt;nicolas.dufresne@collabora.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Signed-off-by: Cristian Ciocaltea &lt;cristian.ciocaltea@collabora.com&gt;
Signed-off-by: Nicolas Dufresne &lt;nicolas.dufresne@collabora.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: display: ti, am65x-dss: Fix AM62L DSS reg and clock constraints</title>
<updated>2026-05-07T04:11:35+00:00</updated>
<author>
<name>Swamil Jain</name>
<email>s-jain1@ti.com</email>
</author>
<published>2026-04-15T11:04:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=824897e69d7ae94f9a65790b74e8e37032e3393c'/>
<id>824897e69d7ae94f9a65790b74e8e37032e3393c</id>
<content type='text'>
commit 9c469240997584449cfac51a75d1d3d71968c76f upstream.

The AM62L DSS [1] support incorrectly used the same register and
clock constraints as AM65x, but AM62L has a single video port

Fix this by adding conditional constraints that properly define the
register regions and clocks for AM62L DSS (single video port) versus
other AM65x variants (dual video port).

[1]: Section 12.7 (Display Subsystem and Peripherals)
Link : https://www.ti.com/lit/pdf/sprujb4

Fixes: cb8d4323302c ("dt-bindings: display: ti,am65x-dss: Add support for AM62L DSS")
Cc: stable@vger.kernel.org
Signed-off-by: Swamil Jain &lt;s-jain1@ti.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/20260415110409.2577633-1-s-jain1@ti.com
Signed-off-by: Rob Herring (Arm) &lt;robh@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 9c469240997584449cfac51a75d1d3d71968c76f upstream.

The AM62L DSS [1] support incorrectly used the same register and
clock constraints as AM65x, but AM62L has a single video port

Fix this by adding conditional constraints that properly define the
register regions and clocks for AM62L DSS (single video port) versus
other AM65x variants (dual video port).

[1]: Section 12.7 (Display Subsystem and Peripherals)
Link : https://www.ti.com/lit/pdf/sprujb4

Fixes: cb8d4323302c ("dt-bindings: display: ti,am65x-dss: Add support for AM62L DSS")
Cc: stable@vger.kernel.org
Signed-off-by: Swamil Jain &lt;s-jain1@ti.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/20260415110409.2577633-1-s-jain1@ti.com
Signed-off-by: Rob Herring (Arm) &lt;robh@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: net: Fix Tegra234 MGBE PTP clock</title>
<updated>2026-04-22T11:22:20+00:00</updated>
<author>
<name>Jon Hunter</name>
<email>jonathanh@nvidia.com</email>
</author>
<published>2026-04-01T10:29:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9550d1d9f7163dd868aa12806f16e15d801399f0'/>
<id>9550d1d9f7163dd868aa12806f16e15d801399f0</id>
<content type='text'>
[ Upstream commit fb22b1fc5bca3c0aad95388933497ceb30f1fb26 ]

The PTP clock for the Tegra234 MGBE device is incorrectly named
'ptp-ref' and should be 'ptp_ref'. This is causing the following
warning to be observed on Tegra234 platforms that use this device:

 ERR KERN tegra-mgbe 6800000.ethernet eth0: Invalid PTP clock rate
 WARNING KERN tegra-mgbe 6800000.ethernet eth0: PTP init failed

Although this constitutes an ABI breakage in the binding for this
device, PTP support has clearly never worked and so fix this now
so we can correct the device-tree for this device. Note that the
MGBE driver still supports the legacy 'ptp-ref' clock name and so
older/existing device-trees will still work, but given that this
is not the correct name, there is no point to advertise this in the
binding.

Fixes: 189c2e5c7669 ("dt-bindings: net: Add Tegra234 MGBE")
Signed-off-by: Jon Hunter &lt;jonathanh@nvidia.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/20260401102941.17466-3-jonathanh@nvidia.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit fb22b1fc5bca3c0aad95388933497ceb30f1fb26 ]

The PTP clock for the Tegra234 MGBE device is incorrectly named
'ptp-ref' and should be 'ptp_ref'. This is causing the following
warning to be observed on Tegra234 platforms that use this device:

 ERR KERN tegra-mgbe 6800000.ethernet eth0: Invalid PTP clock rate
 WARNING KERN tegra-mgbe 6800000.ethernet eth0: PTP init failed

Although this constitutes an ABI breakage in the binding for this
device, PTP support has clearly never worked and so fix this now
so we can correct the device-tree for this device. Note that the
MGBE driver still supports the legacy 'ptp-ref' clock name and so
older/existing device-trees will still work, but given that this
is not the correct name, there is no point to advertise this in the
binding.

Fixes: 189c2e5c7669 ("dt-bindings: net: Add Tegra234 MGBE")
Signed-off-by: Jon Hunter &lt;jonathanh@nvidia.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/20260401102941.17466-3-jonathanh@nvidia.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: connector: add pd-disable dependency</title>
<updated>2026-04-11T12:26:44+00:00</updated>
<author>
<name>Xu Yang</name>
<email>xu.yang_2@nxp.com</email>
</author>
<published>2026-03-30T06:35:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f5526abe978fdde35e76f97c7e5d667262389d6a'/>
<id>f5526abe978fdde35e76f97c7e5d667262389d6a</id>
<content type='text'>
commit 269c26464dcf8b54b0dd9c333721c30ee44ae297 upstream.

When Power Delivery is not supported, the source is unable to obtain the
current capability from the Source PDO. As a result, typec-power-opmode
needs to be added to advertise such capability.

Acked-by: Conor Dooley &lt;conor.dooley@microchip.com&gt;
Cc: stable &lt;stable@kernel.org&gt;
Signed-off-by: Xu Yang &lt;xu.yang_2@nxp.com&gt;
Link: https://patch.msgid.link/20260330063518.719345-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 269c26464dcf8b54b0dd9c333721c30ee44ae297 upstream.

When Power Delivery is not supported, the source is unable to obtain the
current capability from the Source PDO. As a result, typec-power-opmode
needs to be added to advertise such capability.

Acked-by: Conor Dooley &lt;conor.dooley@microchip.com&gt;
Cc: stable &lt;stable@kernel.org&gt;
Signed-off-by: Xu Yang &lt;xu.yang_2@nxp.com&gt;
Link: https://patch.msgid.link/20260330063518.719345-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: gpio: fix microchip #interrupt-cells</title>
<updated>2026-04-11T12:26:31+00:00</updated>
<author>
<name>Jamie Gibbons</name>
<email>jamie.gibbons@microchip.com</email>
</author>
<published>2026-03-26T17:02:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3a8b66a84f0580061c342a12889a037845b0a9c4'/>
<id>3a8b66a84f0580061c342a12889a037845b0a9c4</id>
<content type='text'>
[ Upstream commit 6b5ef8c88854b343b733b574ea8754c9dab61f41 ]

The GPIO controller on PolarFire SoC supports more than one type of
interrupt and needs two interrupt cells.

Fixes: 735806d8a68e9 ("dt-bindings: gpio: add bindings for microchip mpfs gpio")
Signed-off-by: Jamie Gibbons &lt;jamie.gibbons@microchip.com&gt;
Signed-off-by: Conor Dooley &lt;conor.dooley@microchip.com&gt;
Link: https://patch.msgid.link/20260326-wise-gumdrop-49217723a72a@spud
Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@oss.qualcomm.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 6b5ef8c88854b343b733b574ea8754c9dab61f41 ]

The GPIO controller on PolarFire SoC supports more than one type of
interrupt and needs two interrupt cells.

Fixes: 735806d8a68e9 ("dt-bindings: gpio: add bindings for microchip mpfs gpio")
Signed-off-by: Jamie Gibbons &lt;jamie.gibbons@microchip.com&gt;
Signed-off-by: Conor Dooley &lt;conor.dooley@microchip.com&gt;
Link: https://patch.msgid.link/20260326-wise-gumdrop-49217723a72a@spud
Signed-off-by: Bartosz Golaszewski &lt;bartosz.golaszewski@oss.qualcomm.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: auxdisplay: ht16k33: Use unevaluatedProperties to fix common property warning</title>
<updated>2026-04-11T12:26:18+00:00</updated>
<author>
<name>Frank Li</name>
<email>Frank.Li@nxp.com</email>
</author>
<published>2026-03-02T21:59:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=fdbc00b8b2eecd84ddcb879677c2f0d3bcae66aa'/>
<id>fdbc00b8b2eecd84ddcb879677c2f0d3bcae66aa</id>
<content type='text'>
[ Upstream commit 398c0c8bbc8f5a9d2f43863275a427a9d3720b6f ]

Change additionalProperties to unevaluatedProperties because it refs to
/schemas/input/matrix-keymap.yaml.

Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dtb: keypad@70 (holtek,ht16k33): 'keypad,num-columns', 'keypad,num-rows' do not match any of the regexes: '^pinctrl-[0-9]+$'
        from schema $id: http://devicetree.org/schemas/auxdisplay/holtek,ht16k33.yaml#

Fixes: f12b457c6b25c ("dt-bindings: auxdisplay: ht16k33: Convert to json-schema")
Acked-by: Rob Herring (Arm) &lt;robh@kernel.org&gt;
Signed-off-by: Frank Li &lt;Frank.Li@nxp.com&gt;
Signed-off-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 398c0c8bbc8f5a9d2f43863275a427a9d3720b6f ]

Change additionalProperties to unevaluatedProperties because it refs to
/schemas/input/matrix-keymap.yaml.

Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dtb: keypad@70 (holtek,ht16k33): 'keypad,num-columns', 'keypad,num-rows' do not match any of the regexes: '^pinctrl-[0-9]+$'
        from schema $id: http://devicetree.org/schemas/auxdisplay/holtek,ht16k33.yaml#

Fixes: f12b457c6b25c ("dt-bindings: auxdisplay: ht16k33: Convert to json-schema")
Acked-by: Rob Herring (Arm) &lt;robh@kernel.org&gt;
Signed-off-by: Frank Li &lt;Frank.Li@nxp.com&gt;
Signed-off-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ASoC: dt-bindings: stm32: Fix incorrect compatible string in stm32h7-sai match</title>
<updated>2026-04-02T11:23:14+00:00</updated>
<author>
<name>Jihed Chaibi</name>
<email>jihed.chaibi.dev@gmail.com</email>
</author>
<published>2026-03-21T01:20:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8f3226f00cb1f9f82c3d0b04251b465889e7fce0'/>
<id>8f3226f00cb1f9f82c3d0b04251b465889e7fce0</id>
<content type='text'>
[ Upstream commit 91049ec2e18376ec2192e73ef7be4c7110436350 ]

The conditional block that defines clock constraints for the stm32h7-sai
variant references "st,stm32mph7-sai", which does not match any compatible
string in the enum. As a result, clock validation for the h7 variant is
silently skipped. Correct the compatible string to "st,stm32h7-sai".

Fixes: 8509bb1f11a1f ("ASoC: dt-bindings: add stm32mp25 support for sai")
Signed-off-by: Jihed Chaibi &lt;jihed.chaibi.dev@gmail.com&gt;
Reviewed-by: Olivier Moysan &lt;olivier.moysan@foss.st.com&gt;
Link: https://patch.msgid.link/20260321012011.125791-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 91049ec2e18376ec2192e73ef7be4c7110436350 ]

The conditional block that defines clock constraints for the stm32h7-sai
variant references "st,stm32mph7-sai", which does not match any compatible
string in the enum. As a result, clock validation for the h7 variant is
silently skipped. Correct the compatible string to "st,stm32h7-sai".

Fixes: 8509bb1f11a1f ("ASoC: dt-bindings: add stm32mp25 support for sai")
Signed-off-by: Jihed Chaibi &lt;jihed.chaibi.dev@gmail.com&gt;
Reviewed-by: Olivier Moysan &lt;olivier.moysan@foss.st.com&gt;
Link: https://patch.msgid.link/20260321012011.125791-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: display/msm: qcom,sm8750-mdss: Fix model typo</title>
<updated>2026-03-19T15:08:13+00:00</updated>
<author>
<name>Krzysztof Kozlowski</name>
<email>krzysztof.kozlowski@oss.qualcomm.com</email>
</author>
<published>2026-02-25T17:34:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=98754dda67296db78250f6eecc447e7b2423a2c8'/>
<id>98754dda67296db78250f6eecc447e7b2423a2c8</id>
<content type='text'>
[ Upstream commit 4355b13d46f696d687f42b982efed7570e03e532 ]

Fix obvious model typo (SM8650-&gt;SM8750) in the description.

Signed-off-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Fixes: 6b93840116df ("dt-bindings: display/msm: qcom,sm8750-mdss: Add SM8750")
Reviewed-by: Dmitry Baryshkov &lt;dmitry.baryshkov@oss.qualcomm.com&gt;
Patchwork: https://patchwork.freedesktop.org/patch/707192/
Link: https://lore.kernel.org/r/20260225173419.125565-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@oss.qualcomm.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 4355b13d46f696d687f42b982efed7570e03e532 ]

Fix obvious model typo (SM8650-&gt;SM8750) in the description.

Signed-off-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Fixes: 6b93840116df ("dt-bindings: display/msm: qcom,sm8750-mdss: Add SM8750")
Reviewed-by: Dmitry Baryshkov &lt;dmitry.baryshkov@oss.qualcomm.com&gt;
Patchwork: https://patchwork.freedesktop.org/patch/707192/
Link: https://lore.kernel.org/r/20260225173419.125565-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov &lt;dmitry.baryshkov@oss.qualcomm.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ASoC: dt-bindings: asahi-kasei,ak5558: Fix the supply names</title>
<updated>2026-02-26T22:59:46+00:00</updated>
<author>
<name>Shengjiu Wang</name>
<email>shengjiu.wang@nxp.com</email>
</author>
<published>2026-02-12T02:18:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=84dbf4feaa937a71d53f894e0a950c7af4176f44'/>
<id>84dbf4feaa937a71d53f894e0a950c7af4176f44</id>
<content type='text'>
commit 80ca113671a005430207d351cb403c1637106212 upstream.

In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix the yaml binding document.

Fixes: 829d78e3ea32 ("ASoC: dt-bindings: ak5558: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang &lt;shengjiu.wang@nxp.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/20260212021829.3244736-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 80ca113671a005430207d351cb403c1637106212 upstream.

In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix the yaml binding document.

Fixes: 829d78e3ea32 ("ASoC: dt-bindings: ak5558: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang &lt;shengjiu.wang@nxp.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/20260212021829.3244736-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
