Qualcomm driver fixes for v6.10

UCSI support is disabled on SC8280XP while being debugged, as it's
causing the system to crash. A recent LLCC QDU1000 binding change is
reverted, to allow expressing the LLCC memory regions.

* tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
  soc: qcom: pmic_glink: disable UCSI on sc8280xp

Link: https://lore.kernel.org/r/20240702031157.341031-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This reverts commit f0f99f371822c48847e02e56d6e7de507e18f186.

QDU1000 has 7 register regions. The earlier commit 8e2506d01231
("dt-bindings: cache: qcom,llcc: Add LLCC compatible for QDU1000/QRU1000")
to add llcc compatible was reflecting the same, but dtsi change for
QDU1000 was not aligning with its binding. Later, commit f0f99f371822
("dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries") was merged
intended to fix this misalignment.

After the LLCC driver refactor, each LLCC bank/channel need to be
represented as one register space to avoid mapping to the region where
access is not there. Hence, revert the commit f0f99f371822 ("dt-bindings:
cache: qcom,llcc: correct QDU1000 reg entries") to align QDU1000 llcc
binding with its dtsi node.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240619061641.5261-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, bpf and netfilter.

  There are a bunch of regressions addressed here, but hopefully nothing
  spectacular. We are still waiting the driver fix from Intel, mentioned
  by Jakub in the previous networking pull.

  Current release - regressions:

   - core: add softirq safety to netdev_rename_lock

   - tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
     TFO

   - batman-adv: fix RCU race at module unload time

  Previous releases - regressions:

   - openvswitch: get related ct labels from its master if it is not
     confirmed

   - eth: bonding: fix incorrect software timestamping report

   - eth: mlxsw: fix memory corruptions on spectrum-4 systems

   - eth: ionic: use dev_consume_skb_any outside of napi

  Previous releases - always broken:

   - netfilter: fully validate NFT_DATA_VALUE on store to data registers

   - unix: several fixes for OoB data

   - tcp: fix race for duplicate reqsk on identical SYN

   - bpf:
       - fix may_goto with negative offset
       - fix the corner case with may_goto and jump to the 1st insn
       - fix overrunning reservations in ringbuf

   - can:
       - j1939: recover socket queue on CAN bus error during BAM
         transmission
       - mcp251xfd: fix infinite loop when xmit fails

   - dsa: microchip: monitor potential faults in half-duplex mode

   - eth: vxlan: pull inner IP header in vxlan_xmit_one()

   - eth: ionic: fix kernel panic due to multi-buffer handling

  Misc:

   - selftest: unix tests refactor and a lot of new cases added"

* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  net: mana: Fix possible double free in error handling path
  selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
  af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
  selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
  selftest: af_unix: Check SIGURG after every send() in msg_oob.c
  selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
  af_unix: Don't stop recv() at consumed ex-OOB skb.
  selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
  af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
  af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
  selftest: af_unix: Add msg_oob.c.
  selftest: af_unix: Remove test_unix_oob.c.
  tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
  netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
  net: usb: qmi_wwan: add Telit FN912 compositions
  tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
  ionic: use dev_consume_skb_any outside of napi
  net: dsa: microchip: fix wrong register write when masking interrupt
  Fix race for duplicate reqsk on identical SYN
  ibmvnic: Add tx check to prevent skb leak
  ...

Pull pin control fixes from Linus Walleij:

 - Use flag saving spinlocks in the Renesas rzg2l driver. This fixes up
   PREEMPT_RT problems.

 - Remove broken Qualcomm PM8008 that clearly was never working. A new
   version will arrive in the next merge window.

 - Add a quirk for LP8764 regmap that was missed and made the TI J7200
   board unusable.

 - Fix persistance on the BCM2835 GPIO outputs kernel parameter so this
   remains consisten across a booted kernel.

 - Fix a potential deadlock in create_pinctrl()

 - Fix some erroneous bitfields and pinmux reset in the Rockchip RK3328
   driver.

* tag 'pinctrl-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: rockchip: fix pinmux reset in rockchip_pmx_set
  pinctrl: rockchip: use dedicated pinctrl type for RK3328
  pinctrl: rockchip: fix pinmux bits for RK3328 GPIO3-B pins
  pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins
  pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER
  pinctrl: bcm2835: Fix permissions of persist_gpio_outputs
  pinctrl: tps6594: add missing support for LP8764 PMIC
  dt-bindings: pinctrl: qcom,pmic-gpio: drop pm8008
  pinctrl: qcom: spmi-gpio: drop broken pm8008 support
  pinctrl: renesas: rzg2l: Use spin_{lock,unlock}_irq{save,restore}

Pull i2c fixes from Wolfram Sang:
 "The core gains placeholders for recently added functions when
  CONFIG_I2C is not defined as well documentation fixes to start using
  inclusive terminology.

  The drivers get paths in DT bindings fixed as well as proper interrupt
  handling for the ocores driver"

* tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs
  docs: i2c: summary: document 'local' and 'remote' targets
  docs: i2c: summary: document use of inclusive language
  docs: i2c: summary: update speed mode description
  docs: i2c: summary: update I2C specification link
  docs: i2c: summary: start sentences consistently.
  i2c: Add nop fwnode operations
  i2c: ocores: set IACK bit after core is enabled
  dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
  dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema

IEEE1588(ptp) is optional feature for network. Remove it from required
list to fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: ethernet@f0000: 'ptp-timer' is a required property

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull dmaengine fixes from Vinod Koul:

 - kmemleak, error path handling and missing kmem_cache_destroy() fixes
   for ioatdma driver

 - use after free fix for idxd driver

 - data synchronisation fix for xdma isr handling

 - fsl driver channel constraints and linking two fsl module fixes

* tag 'dmaengine-fix-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: ioatdma: Fix missing kmem_cache_destroy()
  dt-bindings: dma: fsl-edma: fix dma-channels constraints
  dmaengine: fsl-edma: avoid linking both modules
  dmaengine: ioatdma: Fix kmemleak in ioat_pci_probe()
  dmaengine: ioatdma: Fix error path in ioat3_dma_probe()
  dmaengine: ioatdma: Fix leaking on version mismatch
  dmaengine: ti: k3-udma-glue: Fix of_k3_udma_glue_parse_chn_by_id()
  dmaengine: idxd: Fix possible Use-After-Free in irq_process_work_list
  dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr()

The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.

Cc: stable@vger.kernel.org
Fixes: 1acd4577a66f ("dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.

Cc: stable@vger.kernel.org
Fixes: 7ea75dd386be ("dt-bindings: i2c: convert i2c-at91 to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

The binding for PM8008 is being reworked so that internal details like
interrupts and register offsets are no longer described. This
specifically also involves dropping the gpio child node and its
compatible string which is no longer needed.

Note that there are currently no users of the upstream binding and
driver.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240529162958.18081-10-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>