linux-stable.git/Documentation/devicetree, branch v5.4.63 Linux kernel stable tree dt-bindings: mmc: tegra: Add tmclk for Tegra210 and later 2020-09-05T09:22:50+00:00 Sowjanya Komatineni skomatineni@nvidia.com 2020-08-27T17:20:57+00:00 9d806d68bf97e862ce7652573bdaac5ce13ed9a2 commit f7f86e8ac0ad7cd6792a80137f5a550924966916 upstream. commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support") Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data timeout. So, this patch adds "tmclk" to Tegra sdhci clock property in the device tree binding. Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support") Cc: stable <stable@vger.kernel.org> # 5.4 Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1598548861-32373-4-git-send-email-skomatineni@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f7f86e8ac0ad7cd6792a80137f5a550924966916 upstream.

commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data
timeout.

So, this patch adds "tmclk" to Tegra sdhci clock property in the
device tree binding.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-4-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: iio: io-channel-mux: Fix compatible string in example code 2020-08-21T11:05:23+00:00 Christian Eggers ceggers@arri.de 2020-07-27T10:16:05+00:00 1a5e5b3b7571c67978ed5988bb5c6643844d4f00 commit add48ba425192c6e04ce70549129cacd01e2a09e upstream. The correct compatible string is "gpio-mux" (see bindings/mux/gpio-mux.txt). Cc: stable@vger.kernel.org # v4.13+ Reviewed-by: Peter Rosin <peda@axentia.se> Signed-off-by: Christian Eggers <ceggers@arri.de> Link: https://lore.kernel.org/r/20200727101605.24384-1-ceggers@arri.de Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit add48ba425192c6e04ce70549129cacd01e2a09e upstream.

The correct compatible string is "gpio-mux" (see
bindings/mux/gpio-mux.txt).

Cc: stable@vger.kernel.org # v4.13+
Reviewed-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://lore.kernel.org/r/20200727101605.24384-1-ceggers@arri.de
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
doc: dt: bindings: usb: dwc3: Update entries for disabling SS instances in park mode 2020-07-22T07:32:59+00:00 Neil Armstrong narmstrong@baylibre.com 2020-02-21T09:15:30+00:00 e60b02922876b4db2856c1c7e72f87b57e183ae8 [ Upstream commit 3d157c28d2289edf0439e8308e8de3a06acaaf0e ] This patch updates the documentation with the information related to the quirks that needs to be added for disabling all SuperSpeed XHCI instances in park mode. Cc: Dongjin Kim <tobetter@gmail.com> Cc: Jianxin Pan <jianxin.pan@amlogic.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Jun Li <lijun.kernel@gmail.com> Reported-by: Tim <elatllat@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3d157c28d2289edf0439e8308e8de3a06acaaf0e ]

This patch updates the documentation with the information related
to the quirks that needs to be added for disabling all SuperSpeed XHCI
instances in park mode.

Cc: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dt-bindings: mailbox: zynqmp_ipi: fix unit address 2020-07-22T07:32:52+00:00 Kangmin Park l4stpr0gr4m@gmail.com 2020-06-25T13:51:58+00:00 43046f786714f75aa833c7c8e4ae649099979d94 [ Upstream commit 35b9c0fdb9f666628ecda02b1fc44306933a2d97 ] Fix unit address to match the first address specified in the reg property of the node in example. Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com> Link: https://lore.kernel.org/r/20200625135158.5861-1-l4stpr0gr4m@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 35b9c0fdb9f666628ecda02b1fc44306933a2d97 ]

Fix unit address to match the first address specified in the reg
property of the node in example.

Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Link: https://lore.kernel.org/r/20200625135158.5861-1-l4stpr0gr4m@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dt-bindings: display: mediatek: control dpi pins mode to avoid leakage 2020-06-22T07:30:58+00:00 Jitao Shi jitao.shi@mediatek.com 2020-04-15T01:13:17+00:00 878ca9ebf1a0f5dad9a944d9dd00902933170dfa [ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ] Add property "pinctrl-names" to swap pin mode between gpio and dpi mode. Set the dpi pins to gpio mode and output-low to avoid leakage current when dpi disabled. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ]

Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
arm64: tegra: Fix Tegra194 PCIe compatible string 2020-04-23T08:36:30+00:00 Jon Hunter jonathanh@nvidia.com 2020-02-14T13:53:53+00:00 d7b59cd020f73c36b58dd504a302e70fe3e0ec96 [ Upstream commit f9f711efd441ad0d22874be49986d92121862335 ] If the kernel configuration option CONFIG_PCIE_DW_PLAT_HOST is enabled then this can cause the kernel to incorrectly probe the generic designware PCIe platform driver instead of the Tegra194 designware PCIe driver. This causes a boot failure on Tegra194 because the necessary configuration to access the hardware is not performed. The order in which the compatible strings are populated in Device-Tree is not relevant in this case, because the kernel will attempt to probe the device as soon as a driver is loaded and if the generic designware PCIe driver is loaded first, then this driver will be probed first. Therefore, to fix this problem, remove the "snps,dw-pcie" string from the compatible string as we never want this driver to be probe on Tegra194. Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f9f711efd441ad0d22874be49986d92121862335 ]

If the kernel configuration option CONFIG_PCIE_DW_PLAT_HOST is enabled
then this can cause the kernel to incorrectly probe the generic
designware PCIe platform driver instead of the Tegra194 designware PCIe
driver. This causes a boot failure on Tegra194 because the necessary
configuration to access the hardware is not performed.

The order in which the compatible strings are populated in Device-Tree
is not relevant in this case, because the kernel will attempt to probe
the device as soon as a driver is loaded and if the generic designware
PCIe driver is loaded first, then this driver will be probed first.
Therefore, to fix this problem, remove the "snps,dw-pcie" string from
the compatible string as we never want this driver to be probe on
Tegra194.

Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dt-bindings: net: FMan erratum A050385 2020-04-01T09:01:52+00:00 Madalin Bucur madalin.bucur@nxp.com 2020-03-04T16:04:25+00:00 c211a30c1846cf941c3c1d5589d95b9bc9aa8d73 [ Upstream commit 26d5bb9e4c4b541c475751e015072eb2cbf70d15 ] FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 26d5bb9e4c4b541c475751e015072eb2cbf70d15 ]

FMAN DMA read or writes under heavy traffic load may cause FMAN
internal resource leak; thus stopping further packet processing.

The FMAN internal queue can overflow when FMAN splits single
read or write transactions into multiple smaller transactions
such that more than 17 AXI transactions are in flight from FMAN
to interconnect. When the FMAN internal queue overflows, it can
stall further packet processing. The issue can occur with any one
of the following three conditions:

  1. FMAN AXI transaction crosses 4K address boundary (Errata
     A010022)
  2. FMAN DMA address for an AXI transaction is not 16 byte
     aligned, i.e. the last 4 bits of an address are non-zero
  3. Scatter Gather (SG) frames have more than one SG buffer in
     the SG list and any one of the buffers, except the last
     buffer in the SG list has data size that is not a multiple
     of 16 bytes, i.e., other than 16, 32, 48, 64, etc.

With any one of the above three conditions present, there is
likelihood of stalled FMAN packet processing, especially under
stress with multiple ports injecting line-rate traffic.

To avoid situations that stall FMAN packet processing, all of the
above three conditions must be avoided; therefore, configure the
system with the following rules:

  1. Frame buffers must not span a 4KB address boundary, unless
     the frame start address is 256 byte aligned
  2. All FMAN DMA start addresses (for example, BMAN buffer
     address, FD[address] + FD[offset]) are 16B aligned
  3. SG table and buffer addresses are 16B aligned and the size
     of SG buffers are multiple of 16 bytes, except for the last
     SG buffer that can be of any size.

Additional workaround notes:
- Address alignment of 64 bytes is recommended for maximally
efficient system bus transactions (although 16 byte alignment is
sufficient to avoid the stall condition)
- To support frame sizes that are larger than 4K bytes, there are
two options:
  1. Large single buffer frames that span a 4KB page boundary can
     be converted into SG frames to avoid transaction splits at
     the 4KB boundary,
  2. Align the large single buffer to 256B address boundaries,
     ensure that the frame address plus offset is 256B aligned.
- If software generated SG frames have buffers that are unaligned
and with random non-multiple of 16 byte lengths, before
transmitting such frames via FMAN, frames will need to be copied
into a new single buffer or multiple buffer SG frame that is
compliant with the three rules listed above.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dt-bindings: iio: adc: ad7606: Fix wrong maxItems value 2020-02-14T21:34:19+00:00 Beniamin Bia beniamin.bia@analog.com 2020-01-14T13:24:01+00:00 7c71d438e7e58a6889b89889282f17eed7e6958e commit a6c4f77cb3b11f81077b53c4a38f21b92d41f21e upstream. This patch set the correct value for oversampling maxItems. In the original example, appears 3 items for oversampling while the maxItems is set to 1, this patch fixes those issues. Fixes: 416f882c3b40 ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml") Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a6c4f77cb3b11f81077b53c4a38f21b92d41f21e upstream.

This patch set the correct value for oversampling maxItems. In the
original example, appears 3 items for oversampling while the maxItems
is set to 1, this patch fixes those issues.

Fixes: 416f882c3b40 ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml")
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwrng: omap3-rom - Fix missing clock by probing with device tree 2020-01-26T09:01:03+00:00 Tony Lindgren tony@atomide.com 2019-09-14T21:02:55+00:00 9af27538c55d7f838e1a0e465e40deaa033bf396 [ Upstream commit 0c0ef9ea6f3f0d5979dc7b094b0a184c1a94716b ] Commit 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases") removed old omap3 clock framework aliases but caused omap3-rom-rng to stop working with clock not found error. Based on discussions on the mailing list it was requested by Tero Kristo that it would be best to fix this issue by probing omap3-rom-rng using device tree to provide a proper clk property. The other option would be to add back the missing clock alias, but that does not help moving things forward with removing old legacy platform_data. Let's also add a proper device tree binding and keep it together with the fix. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Fixes: 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0c0ef9ea6f3f0d5979dc7b094b0a184c1a94716b ]

Commit 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases")
removed old omap3 clock framework aliases but caused omap3-rom-rng to
stop working with clock not found error.

Based on discussions on the mailing list it was requested by Tero Kristo
that it would be best to fix this issue by probing omap3-rom-rng using
device tree to provide a proper clk property. The other option would be
to add back the missing clock alias, but that does not help moving things
forward with removing old legacy platform_data.

Let's also add a proper device tree binding and keep it together with
the fix.

Cc: devicetree@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Fixes: 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dt-bindings: Add missing 'properties' keyword enclosing 'snps,tso' 2020-01-23T07:22:54+00:00 Rob Herring robh@kernel.org 2019-12-17T16:27:12+00:00 0445c81cfbe4413bd13e7b9eb000e9f5d92619a3 commit dbce0b65046d1735d7054c54ec2387dba84ba258 upstream. DT property definitions must be under a 'properties' keyword. This was missing for 'snps,tso' in an if/then clause. A meta-schema fix will catch future errors like this. Fixes: 7db3545aef5f ("dt-bindings: net: stmmac: Convert the binding to a schemas") Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dbce0b65046d1735d7054c54ec2387dba84ba258 upstream.

DT property definitions must be under a 'properties' keyword. This was
missing for 'snps,tso' in an if/then clause. A meta-schema fix will
catch future errors like this.

Fixes: 7db3545aef5f ("dt-bindings: net: stmmac: Convert the binding to a schemas")
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>