linux-stable.git/Documentation/devicetree, branch v5.4.233

dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation

2023-01-24T06:18:01+00:00

commit e181119046a0ec16126b682163040e8e33f310c1 upstream.

The compatible string in the driver doesn't have the meson prefix.
Fix this in the documentation and rename the file accordingly.

Fixes: 87a55485f2fc ("dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit 
Reviewed-by: Martin Blumenstingl 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/0a82be92-ce85-da34-9d6f-4b33034473e5@gmail.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

ASoC: dt-bindings: wcd9335: fix reset line polarity in example

2023-01-18T10:41:06+00:00

[ Upstream commit 34cb111f8a7b98b5fec809dd194003bca20ef1b2 ]

When resetting the block, the reset line is being driven low and then
high, which means that the line in DTS should be annotated as "active
low".

Fixes: 1877c9fda1b7 ("ASoC: dt-bindings: add dt bindings for wcd9335 audio codec")
Signed-off-by: Dmitry Torokhov 
Acked-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20221027074652.1044235-2-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer

2022-10-15T05:54:37+00:00

[ Upstream commit 02181e68275d28cab3c3f755852770367f1bc229 ]

Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc".

But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt
contain compatible = "moxa,moxart-sdhci".

Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver.

Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different
controller from FTSDC010.

Suggested-by: Arnd Bergmann 
Signed-off-by: Sergei Antonov 
Cc: Jonas Jensen 
Link: https://lore.kernel.org/r/20220907175341.1477383-1-saproj@gmail.com'
Signed-off-by: Arnd Bergmann 
Signed-off-by: Sasha Levin

dt-bindings: arm: qcom: fix MSM8916 MTP compatibles

2022-08-25T09:18:25+00:00

commit bb35fe1efbae4114bd288fae0f56070f563adcfc upstream.

The order of compatibles for MSM8916 MTP board is different:

  msm8916-mtp.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
    ['qcom,msm8916-mtp', 'qcom,msm8916-mtp/1', 'qcom,msm8916'] is too long

Fixes: 9d3ef77fe568 ("dt-bindings: arm: Convert QCom board/soc bindings to json-schema")
Signed-off-by: Krzysztof Kozlowski 
Acked-by: Rob Herring 
Link: https://lore.kernel.org/r/20220520123252.365762-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

dt-bindings: dma: allwinner,sun50i-a64-dma: Fix min/max typo

2022-07-12T14:30:49+00:00

commit 607a48c78e6b427b0b684d24e61c19e846ad65d6 upstream.

The conditional block for variants with a second clock should have set
minItems, not maxItems, which was already 2. Since clock-names requires
two items, this typo should not have caused any problems.

Fixes: edd14218bd66 ("dt-bindings: dmaengine: Convert Allwinner A31 and A64 DMA to a schema")
Signed-off-by: Samuel Holland 
Reviewed-by: Rob Herring 
Link: https://lore.kernel.org/r/20220702031903.21703-1-samuel@sholland.org
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dt-bindings: gpio: altera: correct interrupt-cells

2022-06-14T16:11:49+00:00

commit 3a21c3ac93aff7b4522b152399df8f6a041df56d upstream.

update documentation to correctly state the interrupt-cells to be 2.

Cc: stable@vger.kernel.org
Fixes: 4fd9bbc6e071 ("drivers/gpio: Altera soft IP GPIO driver devicetree binding")
Signed-off-by: Dinh Nguyen 
Signed-off-by: Greg Kroah-Hartman

dt-bindings: spi: mxic: The interrupt property is not mandatory

2022-04-15T12:18:30+00:00

commit 90c204d3195a795f77f5bce767e311dd1c59ca17 upstream.

The interrupt property is not mandatory at all, this property should not
be part of the required properties list, so move it into the optional
properties list.

Fixes: 326e5c8d4a87 ("dt-binding: spi: Document Macronix controller bindings")
Signed-off-by: Miquel Raynal 
Reviewed-by: Rob Herring 
Reviewed-by: Mark Brown 
Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-8-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman

dt-bindings: mtd: nand-controller: Fix a comment in the examples

2022-04-15T12:18:30+00:00

commit 0e7f1b557974ce297e5e4c9d4245720fbb489886 upstream.

The controller properties should be in the controller 'parent' node,
while properties in the children nodes are specific to the NAND
*chip*. This error was already present during the yaml conversion.

Fixes: 2d472aba15ff ("mtd: nand: document the NAND controller/NAND chip DT representation")
Signed-off-by: Miquel Raynal 
Acked-by: Rob Herring 
Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-3-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman

dt-bindings: mtd: nand-controller: Fix the reg property description

2022-04-15T12:18:30+00:00

commit 93f2ec9e401276fb4ea9903194a5bfcf175f9a2c upstream.

The reg property of a NAND device always references the chip-selects.
The ready/busy lines are described in the nand-rb property. I believe
this was a harmless copy/paste error during the conversion to yaml.

Fixes: 212e49693592 ("dt-bindings: mtd: Add YAML schemas for the generic NAND options")
Signed-off-by: Miquel Raynal 
Acked-by: Rob Herring 
Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman

dt-bindings: can: tcan4x5x: fix mram-cfg RX FIFO config

2022-02-01T16:24:39+00:00

commit 17a30422621c0e04cb6060d20d7edcefd7463347 upstream.

This tcan4x5x only comes with 2K of MRAM, a RX FIFO with a dept of 32
doesn't fit into the MRAM. Use a depth of 16 instead.

Fixes: 4edd396a1911 ("dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver")
Link: https://lore.kernel.org/all/20220119062951.2939851-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman