<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/Documentation/devicetree, branch v5.4.13</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>ASoC: dt-bindings: mt8183: add missing update</title>
<updated>2020-01-17T18:48:33+00:00</updated>
<author>
<name>Tzung-Bi Shih</name>
<email>tzungbi@google.com</email>
</author>
<published>2019-09-20T11:23:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b972e5372c92bce3789b26e4a6485779813faebd'/>
<id>b972e5372c92bce3789b26e4a6485779813faebd</id>
<content type='text'>
commit 7cf2804775f8a388411624b3e768e55d08711e9d upstream.

Headset codec is optional.  Add missing update to DT binding document.

Fixes: a962a809e5e4 ("ASoC: mediatek: mt8183: make headset codec optional")
Signed-off-by: Tzung-Bi Shih &lt;tzungbi@google.com&gt;
Link: https://lore.kernel.org/r/20190920112320.166052-1-tzungbi@google.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 7cf2804775f8a388411624b3e768e55d08711e9d upstream.

Headset codec is optional.  Add missing update to DT binding document.

Fixes: a962a809e5e4 ("ASoC: mediatek: mt8183: make headset codec optional")
Signed-off-by: Tzung-Bi Shih &lt;tzungbi@google.com&gt;
Link: https://lore.kernel.org/r/20190920112320.166052-1-tzungbi@google.com
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: reset: Fix brcmstb-reset example</title>
<updated>2020-01-17T18:48:29+00:00</updated>
<author>
<name>Florian Fainelli</name>
<email>f.fainelli@gmail.com</email>
</author>
<published>2019-11-04T18:15:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=05b41913ac6f48faadab48057437b31646abe7b5'/>
<id>05b41913ac6f48faadab48057437b31646abe7b5</id>
<content type='text'>
commit 392a9f63058f2cdcec8363b849a25532ee40da9f upstream.

The reset controller has a #reset-cells value of 1, so we should see a
phandle plus a register identifier, fix the example.

Fixes: 0807caf647dd ("dt-bindings: reset: Add document for Broadcom STB reset controller")
Signed-off-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Signed-off-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 392a9f63058f2cdcec8363b849a25532ee40da9f upstream.

The reset controller has a #reset-cells value of 1, so we should see a
phandle plus a register identifier, fix the example.

Fixes: 0807caf647dd ("dt-bindings: reset: Add document for Broadcom STB reset controller")
Signed-off-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Signed-off-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example</title>
<updated>2020-01-09T09:20:05+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert+renesas@glider.be</email>
</author>
<published>2019-10-16T14:56:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=da9eb04eaa643d795bbf3dc642a8988d3f3c4b6c'/>
<id>da9eb04eaa643d795bbf3dc642a8988d3f3c4b6c</id>
<content type='text'>
commit 830dbce7c76ea529decac7d23b808c1e7da3d891 upstream.

The documented compatible value for R-Car H3 is
"renesas,r8a7795-rcar-usb2-clock-sel", not
"renesas,r8a77950-rcar-usb2-clock-sel".

Fixes: 311accb64570db45 ("clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY")
Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Reviewed-by: Yoshihiro Shimoda &lt;yoshihiro.shimoda.uh@renesas.com&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Link: https://lore.kernel.org/r/20191016145650.30003-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 830dbce7c76ea529decac7d23b808c1e7da3d891 upstream.

The documented compatible value for R-Car H3 is
"renesas,r8a7795-rcar-usb2-clock-sel", not
"renesas,r8a77950-rcar-usb2-clock-sel".

Fixes: 311accb64570db45 ("clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY")
Signed-off-by: Geert Uytterhoeven &lt;geert+renesas@glider.be&gt;
Reviewed-by: Yoshihiro Shimoda &lt;yoshihiro.shimoda.uh@renesas.com&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Link: https://lore.kernel.org/r/20191016145650.30003-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: Improve validation build error handling</title>
<updated>2020-01-04T18:18:11+00:00</updated>
<author>
<name>Rob Herring</name>
<email>robh@kernel.org</email>
</author>
<published>2019-11-13T15:46:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c3f76584cafe0e7d26923db3277f3f506841da7a'/>
<id>c3f76584cafe0e7d26923db3277f3f506841da7a</id>
<content type='text'>
[ Upstream commit 93512dad334deb444619505f1fbb761156f7471b ]

Schema errors can cause make to exit before useful information is
printed. This leaves developers wondering what's wrong. It can be
overcome passing '-k' to make, but that's not an obvious solution.
There's 2 scenarios where this happens.

When using DT_SCHEMA_FILES to validate with a single schema, any error
in the schema results in processed-schema.yaml being empty causing a
make error. The result is the specific errors in the schema are never
shown because processed-schema.yaml is the first target built. Simply
making processed-schema.yaml last in extra-y ensures the full schema
validation with detailed error messages happen first.

The 2nd problem is while schema errors are ignored for
processed-schema.yaml, full validation of the schema still runs in
parallel and any schema validation errors will still stop the build when
running validation of dts files. The fix is to not add the schema
examples to extra-y in this case. This means 'dtbs_check' is no longer a
superset of 'dt_binding_check'. Update the documentation to make this
clear.

Cc: Masahiro Yamada &lt;yamada.masahiro@socionext.com&gt;
Tested-by: Jeffrey Hugo &lt;jhugo@codeaurora.org&gt;
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 93512dad334deb444619505f1fbb761156f7471b ]

Schema errors can cause make to exit before useful information is
printed. This leaves developers wondering what's wrong. It can be
overcome passing '-k' to make, but that's not an obvious solution.
There's 2 scenarios where this happens.

When using DT_SCHEMA_FILES to validate with a single schema, any error
in the schema results in processed-schema.yaml being empty causing a
make error. The result is the specific errors in the schema are never
shown because processed-schema.yaml is the first target built. Simply
making processed-schema.yaml last in extra-y ensures the full schema
validation with detailed error messages happen first.

The 2nd problem is while schema errors are ignored for
processed-schema.yaml, full validation of the schema still runs in
parallel and any schema validation errors will still stop the build when
running validation of dts files. The fix is to not add the schema
examples to extra-y in this case. This means 'dtbs_check' is no longer a
superset of 'dt_binding_check'. Update the documentation to make this
clear.

Cc: Masahiro Yamada &lt;yamada.masahiro@socionext.com&gt;
Tested-by: Jeffrey Hugo &lt;jhugo@codeaurora.org&gt;
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ath10k: Fix HOST capability QMI incompatibility</title>
<updated>2019-11-29T09:09:41+00:00</updated>
<author>
<name>Bjorn Andersson</name>
<email>bjorn.andersson@linaro.org</email>
</author>
<published>2019-07-25T06:31:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2a807b1b4e7e401bdc9be0b66eb979fe4bba434d'/>
<id>2a807b1b4e7e401bdc9be0b66eb979fe4bba434d</id>
<content type='text'>
commit 7165ef890a4c44cf16db66b82fd78448f4bde6ba upstream.

The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI
message") served the purpose of supporting the new and extended HOST
capability QMI message.

But while the new message adds a slew of optional members it changes the
data type of the "daemon_support" member, which means that older
versions of the firmware will fail to decode the incoming request
message.

There is no way to detect this breakage from Linux and there's no way to
recover from sending the wrong message (i.e. we can't just try one
format and then fallback to the other), so a quirk is introduced in
DeviceTree to indicate to the driver that the firmware requires the 8bit
version of this message.

Cc: stable@vger.kernel.org
Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message")
Signed-off-by: Bjorn Andersson &lt;bjorn.andersson@linaro.org&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 7165ef890a4c44cf16db66b82fd78448f4bde6ba upstream.

The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI
message") served the purpose of supporting the new and extended HOST
capability QMI message.

But while the new message adds a slew of optional members it changes the
data type of the "daemon_support" member, which means that older
versions of the firmware will fail to decode the incoming request
message.

There is no way to detect this breakage from Linux and there's no way to
recover from sending the wrong message (i.e. we can't just try one
format and then fallback to the other), so a quirk is introduced in
DeviceTree to indicate to the driver that the firmware requires the 8bit
version of this message.

Cc: stable@vger.kernel.org
Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message")
Signed-off-by: Bjorn Andersson &lt;bjorn.andersson@linaro.org&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Signed-off-by: Kalle Valo &lt;kvalo@codeaurora.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc</title>
<updated>2019-10-25T20:00:47+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-10-25T20:00:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=63cbb3b364c0c2500e59d24a6cde92c8f2ff1c18'/>
<id>63cbb3b364c0c2500e59d24a6cde92c8f2ff1c18</id>
<content type='text'>
Pull ARM SoC fixes from Olof Johansson:
 "A slightly larger set of fixes have accrued in the last two weeks.
  Mostly a collection of the usual smaller fixes:

   - Marvell Armada: USB phy setup issues on Turris Mox

   - Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
     width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
     maintainer updates.

   - OMAP: Fixlets for display config, interrupt settings for wifi, some
     clock/PM pieces. Also IOMMU regression fix and a ti-sysc
     no-watchdog regression fix.

   - i.MX: A few fixes around PM/settings, some devicetree fixlets and
     catching up with config option changes in DRM

   - Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
     panel settings

  ... and some smaller fixes for Davinci (backlight, McBSP DMA),
  Allwinner (phy regulators, PMU removal on A64, etc)"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
  ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
  MAINTAINERS: Update the Spreadtrum SoC maintainer
  MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
  ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
  bus: ti-sysc: Fix watchdog quirk handling
  ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU
  ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs
  ARM: davinci_all_defconfig: enable GPIO backlight
  ARM: davinci: dm365: Fix McBSP dma_slave_map entry
  ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
  ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
  arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
  arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
  arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
  ARM: dts: imx7s: Correct GPT's ipg clock source
  ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
  ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
  arm64: dts: lx2160a: Correct CPU core idle state name
  mailmap: Add Simon Arlott (replacement for expired email address)
  arm64: dts: rockchip: Fix override mode for rk3399-kevin panel
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ARM SoC fixes from Olof Johansson:
 "A slightly larger set of fixes have accrued in the last two weeks.
  Mostly a collection of the usual smaller fixes:

   - Marvell Armada: USB phy setup issues on Turris Mox

   - Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
     width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
     maintainer updates.

   - OMAP: Fixlets for display config, interrupt settings for wifi, some
     clock/PM pieces. Also IOMMU regression fix and a ti-sysc
     no-watchdog regression fix.

   - i.MX: A few fixes around PM/settings, some devicetree fixlets and
     catching up with config option changes in DRM

   - Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
     panel settings

  ... and some smaller fixes for Davinci (backlight, McBSP DMA),
  Allwinner (phy regulators, PMU removal on A64, etc)"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
  ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
  MAINTAINERS: Update the Spreadtrum SoC maintainer
  MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
  ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
  bus: ti-sysc: Fix watchdog quirk handling
  ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU
  ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs
  ARM: davinci_all_defconfig: enable GPIO backlight
  ARM: davinci: dm365: Fix McBSP dma_slave_map entry
  ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
  ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
  arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
  arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
  arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
  ARM: dts: imx7s: Correct GPT's ipg clock source
  ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
  ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
  arm64: dts: lx2160a: Correct CPU core idle state name
  mailmap: Add Simon Arlott (replacement for expired email address)
  arm64: dts: rockchip: Fix override mode for rk3399-kevin panel
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'devicetree-fixes-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux</title>
<updated>2019-10-24T22:29:40+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-10-24T22:29:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=39a38bcba4ab6e5285b07675b0e42c96eec35e67'/>
<id>39a38bcba4ab6e5285b07675b0e42c96eec35e67</id>
<content type='text'>
Pull Devicetree fixes from Rob Herring:
 "A couple more DT fixes for 5.4: fix a ref count, memory leak, and
  Risc-V cpu schema warnings"

* tag 'devicetree-fixes-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: reserved_mem: add missing of_node_put() for proper ref-counting
  of: unittest: fix memory leak in unittest_data_add
  dt-bindings: riscv: Fix CPU schema errors
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull Devicetree fixes from Rob Herring:
 "A couple more DT fixes for 5.4: fix a ref count, memory leak, and
  Risc-V cpu schema warnings"

* tag 'devicetree-fixes-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: reserved_mem: add missing of_node_put() for proper ref-counting
  of: unittest: fix memory leak in unittest_data_add
  dt-bindings: riscv: Fix CPU schema errors
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: riscv: Fix CPU schema errors</title>
<updated>2019-10-23T19:42:44+00:00</updated>
<author>
<name>Rob Herring</name>
<email>robh@kernel.org</email>
</author>
<published>2019-09-24T19:37:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9af865d95bd730c1d1035acd5dd6df105da98d0c'/>
<id>9af865d95bd730c1d1035acd5dd6df105da98d0c</id>
<content type='text'>
Fix the errors in the RiscV CPU DT schema:

Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: 'timebase-frequency' is a required property
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@1: 'timebase-frequency' is a required property
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: compatible:0: 'riscv' is not one of ['sifive,rocket0', 'sifive,e5', 'sifive,e51', 'sifive,u54-mc', 'sifive,u54', 'sifive,u5']
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: compatible: ['riscv'] is too short
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: 'timebase-frequency' is a required property

The DT spec allows for 'timebase-frequency' to be in 'cpu' or 'cpus' node
and RiscV requires it in /cpus node, so make it disallowed in cpu
nodes.

Fixes: 4fd669a8c487 ("dt-bindings: riscv: convert cpu binding to json-schema")
Cc: Palmer Dabbelt &lt;palmer@sifive.com&gt;
Cc: Albert Ou &lt;aou@eecs.berkeley.edu&gt;
Cc: linux-riscv@lists.infradead.org
Acked-by: Paul Walmsley &lt;paul.walmsley@sifive.com&gt;
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Fix the errors in the RiscV CPU DT schema:

Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: 'timebase-frequency' is a required property
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@1: 'timebase-frequency' is a required property
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: compatible:0: 'riscv' is not one of ['sifive,rocket0', 'sifive,e5', 'sifive,e51', 'sifive,u54-mc', 'sifive,u54', 'sifive,u5']
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: compatible: ['riscv'] is too short
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: 'timebase-frequency' is a required property

The DT spec allows for 'timebase-frequency' to be in 'cpu' or 'cpus' node
and RiscV requires it in /cpus node, so make it disallowed in cpu
nodes.

Fixes: 4fd669a8c487 ("dt-bindings: riscv: convert cpu binding to json-schema")
Cc: Palmer Dabbelt &lt;palmer@sifive.com&gt;
Cc: Albert Ou &lt;aou@eecs.berkeley.edu&gt;
Cc: linux-riscv@lists.infradead.org
Acked-by: Paul Walmsley &lt;paul.walmsley@sifive.com&gt;
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator</title>
<updated>2019-10-23T19:31:17+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-10-23T19:31:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=deed1d44699135e5af7678442607469d14a92141'/>
<id>deed1d44699135e5af7678442607469d14a92141</id>
<content type='text'>
Pull regulator fixes from Mark Brown:
 "There are a few core fixes here around error handling and handling if
  suspend mode configuration and some driver specific fixes here but the
  most important change is the fix to the fixed-regulator DT schema
  conversion introduced during the last merge window.

  That fixes one of the last two errors preventing successful execution
  of "make dt_binding_check" which will be enormously helpful for DT
  schema development"

* tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: Fix PMIC5 BoB min voltage
  regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized
  regulator: lochnagar: Add on_off_delay for VDDCORE
  regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone
  regulator: da9062: fix suspend_enable/disable preparation
  dt-bindings: fixed-regulator: fix compatible enum
  regulator: fixed: Prevent NULL pointer dereference when !CONFIG_OF
  regulator: core: make regulator_register() EPROBE_DEFER aware
  regulator: of: fix suspend-min/max-voltage parsing
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull regulator fixes from Mark Brown:
 "There are a few core fixes here around error handling and handling if
  suspend mode configuration and some driver specific fixes here but the
  most important change is the fix to the fixed-regulator DT schema
  conversion introduced during the last merge window.

  That fixes one of the last two errors preventing successful execution
  of "make dt_binding_check" which will be enormously helpful for DT
  schema development"

* tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: Fix PMIC5 BoB min voltage
  regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized
  regulator: lochnagar: Add on_off_delay for VDDCORE
  regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone
  regulator: da9062: fix suspend_enable/disable preparation
  dt-bindings: fixed-regulator: fix compatible enum
  regulator: fixed: Prevent NULL pointer dereference when !CONFIG_OF
  regulator: core: make regulator_register() EPROBE_DEFER aware
  regulator: of: fix suspend-min/max-voltage parsing
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'sunxi-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes</title>
<updated>2019-10-23T15:34:08+00:00</updated>
<author>
<name>Olof Johansson</name>
<email>olof@lixom.net</email>
</author>
<published>2019-10-23T15:34:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=21397ae00f6bc1323873501608b981ad729e326e'/>
<id>21397ae00f6bc1323873501608b981ad729e326e</id>
<content type='text'>
A number of fixes for this release, but mostly:
  - A fixup for the A10 CSI DT binding merged during the 5.4-rc1 window
  - A fix for a dt-binding error
  - Addition of phy regulator delays
  - The PMU on the A64 was found to be non-functional, so we've dropped it for now

* tag 'sunxi-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun7i: Drop the module clock from the device tree
  dt-bindings: media: sun4i-csi: Drop the module clock
  media: dt-bindings: Fix building error for dt_binding_check
  arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay
  arm64: dts: allwinner: a64: Drop PMU node
  arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay

Link: https://lore.kernel.org/r/80085a57-c40f-4bed-a9c3-19858d87564e.lettre@localhost
Signed-off-by: Olof Johansson &lt;olof@lixom.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
A number of fixes for this release, but mostly:
  - A fixup for the A10 CSI DT binding merged during the 5.4-rc1 window
  - A fix for a dt-binding error
  - Addition of phy regulator delays
  - The PMU on the A64 was found to be non-functional, so we've dropped it for now

* tag 'sunxi-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun7i: Drop the module clock from the device tree
  dt-bindings: media: sun4i-csi: Drop the module clock
  media: dt-bindings: Fix building error for dt_binding_check
  arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay
  arm64: dts: allwinner: a64: Drop PMU node
  arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay

Link: https://lore.kernel.org/r/80085a57-c40f-4bed-a9c3-19858d87564e.lettre@localhost
Signed-off-by: Olof Johansson &lt;olof@lixom.net&gt;
</pre>
</div>
</content>
</entry>
</feed>
