linux-stable.git/Documentation/devicetree, branch linux-5.12.y Linux kernel stable tree dt-bindings: i2c: at91: fix example for scl-gpios 2021-07-20T14:02:25+00:00 Nicolas Ferre nicolas.ferre@microchip.com 2021-06-04T13:19:25+00:00 9f818ec66f4764c7e9878cb0b3c2a84ff652f588 [ Upstream commit 92e669017ff1616ba7d8ba3c65f5193bc2a7acbe ] The SCL gpio pin used by I2C bus for recovery needs to be configured as open drain, so fix the binding example accordingly. In relation with fix c5a283802573 ("ARM: dts: at91: Configure I2C SCL gpio as open drain"). Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: 19e5cef058a0 ("dt-bindings: i2c: at91: document optional bus recovery properties") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 92e669017ff1616ba7d8ba3c65f5193bc2a7acbe ]

The SCL gpio pin used by I2C bus for recovery needs to be configured as
open drain, so fix the binding example accordingly.
In relation with fix c5a283802573 ("ARM: dts: at91: Configure I2C SCL
gpio as open drain").

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 19e5cef058a0 ("dt-bindings: i2c: at91: document optional bus recovery properties")
Signed-off-by: Sasha Levin <sashal@kernel.org>
ASoC: meson: gx-card: fix sound-dai dt schema 2021-06-16T10:05:14+00:00 Jerome Brunet jbrunet@baylibre.com 2021-05-24T09:34:48+00:00 37d144cd4456f3318f2ccf5c7138f79e0fff2e2a commit d031d99b02eaf7363c33f5b27b38086cc8104082 upstream. There is a fair amount of warnings when running 'make dtbs_check' with amlogic,gx-sound-card.yaml. Ex: arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0 arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0 arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0: [66, 0, 0] is too long The reason is that the sound-dai phandle provided has cells, and in such case the schema should use 'phandle-array' instead of 'phandle'. Fixes: fd00366b8e41 ("ASoC: meson: gx: add sound card dt-binding documentation") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210524093448.357140-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d031d99b02eaf7363c33f5b27b38086cc8104082 upstream.

There is a fair amount of warnings when running 'make dtbs_check' with
amlogic,gx-sound-card.yaml.

Ex:
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0: [66, 0, 0] is too long

The reason is that the sound-dai phandle provided has cells, and in such
case the schema should use 'phandle-array' instead of 'phandle'.

Fixes: fd00366b8e41 ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210524093448.357140-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: PCI: rcar-pci-host: Document missing R-Car H1 support 2021-05-19T08:56:44+00:00 Geert Uytterhoeven geert+renesas@glider.be 2021-04-29T12:44:09+00:00 d9df1dce5090f087e55cee15c822be66b5c05fce commit 62b3b3660aff66433d71f142ab6ed2baaea25025 upstream. scripts/checkpatch.pl -f drivers/pci/controller/pcie-rcar-host.c: WARNING: DT compatible string "renesas,pcie-r8a7779" appears un-documented -- check ./Documentation/devicetree/bindings/ #853: FILE: drivers/pci/controller/pcie-rcar-host.c:853: + { .compatible = "renesas,pcie-r8a7779", Re-add the compatible value for R-Car H1, which was lost during the json-schema conversion. Make the "resets" property optional on R-Car H1, as it is not present yet on R-Car Gen1 SoCs. Fixes: 0d69ce3c2c63d4db ("dt-bindings: PCI: rcar-pci-host: Convert bindings to json-schema") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/fb0bb969cd0e5872ab5eac70e070242c0d8a5b81.1619700202.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 62b3b3660aff66433d71f142ab6ed2baaea25025 upstream.

scripts/checkpatch.pl -f drivers/pci/controller/pcie-rcar-host.c:

    WARNING: DT compatible string "renesas,pcie-r8a7779" appears un-documented -- check ./Documentation/devicetree/bindings/
    #853: FILE: drivers/pci/controller/pcie-rcar-host.c:853:
    +	{ .compatible = "renesas,pcie-r8a7779",

Re-add the compatible value for R-Car H1, which was lost during the
json-schema conversion.  Make the "resets" property optional on R-Car
H1, as it is not present yet on R-Car Gen1 SoCs.

Fixes: 0d69ce3c2c63d4db ("dt-bindings: PCI: rcar-pci-host: Convert bindings to json-schema")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/fb0bb969cd0e5872ab5eac70e070242c0d8a5b81.1619700202.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: serial: 8250: Remove duplicated compatible strings 2021-05-19T08:56:44+00:00 Zhen Lei thunder.leizhen@huawei.com 2021-04-22T09:08:57+00:00 eb9488079f064b94d5288a021046854b50c63d9a commit a7277a73984114b38dcb62c8548850800ffe864e upstream. The compatible strings "mediatek,*" appears two times, remove one of them. Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210422090857.583-1-thunder.leizhen@huawei.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a7277a73984114b38dcb62c8548850800ffe864e upstream.

The compatible strings "mediatek,*" appears two times, remove one of them.

Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210422090857.583-1-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml 2021-05-19T08:56:44+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2021-03-31T15:16:08+00:00 561fc5bb53dd96bd81657063157f84fbbe415287 commit 94c34600b6173a2b9dd7d9694a42d86fb8768e62 upstream. The commit 724fabf5df13 ("dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information") has support for DP part of USB3+DP combo PHYs. However this change is not backwards compatible, placing additional requirements onto qcom,sc7180-qmp-usb3-phy and qcom,sdm845-qmp-usb3-phy device nodes (to include separate DP part, etc). However the aforementioned nodes do not inclue DP part, they strictly follow the schema defined in the qcom,qmp-phy.yaml file. Move those compatibles, leaving qcom,qmp-usb3-dp-phy.yaml to describe only real "combo" USB3+DP device nodes. Fixes: 724fabf5df13 ("dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information") Cc: Stephen Boyd <swboyd@chromium.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210331151614.3810197-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 94c34600b6173a2b9dd7d9694a42d86fb8768e62 upstream.

The commit 724fabf5df13 ("dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy
information") has support for DP part of USB3+DP combo PHYs. However
this change is not backwards compatible, placing additional requirements
onto qcom,sc7180-qmp-usb3-phy and qcom,sdm845-qmp-usb3-phy device nodes
(to include separate DP part, etc). However the aforementioned nodes do
not inclue DP part, they strictly follow the schema defined in the
qcom,qmp-phy.yaml file. Move those compatibles, leaving
qcom,qmp-usb3-dp-phy.yaml to describe only real "combo" USB3+DP device nodes.

Fixes: 724fabf5df13 ("dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information")
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210331151614.3810197-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: thermal: rcar-gen3-thermal: Support five TSC nodes on r8a779a0 2021-05-19T08:56:44+00:00 Niklas Söderlund niklas.soderlund+renesas@ragnatech.se 2021-03-10T11:07:16+00:00 045228c6d17ec9d27a9ee42fdee18691eac1fd65 commit 9468e7b031876935230182628f8d5f216c071784 upstream. When adding support for V3U (r8a779a0) it was incorrectly recorded it supports four nodes, while in fact it supports five. The fifth node is named TSC0 and breaks the existing naming schema starting at 1. Work around this by separately defining the reg property for V3U and others. Restore the maximum number of nodes to three for other compatibles as it was before erroneously increasing it for V3U. Fixes: d7fdfb6541f3be88 ("dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210310110716.3297544-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9468e7b031876935230182628f8d5f216c071784 upstream.

When adding support for V3U (r8a779a0) it was incorrectly recorded it
supports four nodes, while in fact it supports five. The fifth node is
named TSC0 and breaks the existing naming schema starting at 1. Work
around this by separately defining the reg property for V3U and others.

Restore the maximum number of nodes to three for other compatibles as
it was before erroneously increasing it for V3U.

Fixes: d7fdfb6541f3be88 ("dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210310110716.3297544-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: media: renesas,vin: Make resets optional on R-Car Gen1 2021-05-19T08:56:44+00:00 Geert Uytterhoeven geert+renesas@glider.be 2021-04-29T12:45:52+00:00 26f3b85a9ee128f3aa472c543c592eae11597e71 commit 7935bb56e21b2add81149f4def8e59b4133fe57c upstream. The "resets" property is not present on R-Car Gen1 SoCs. Supporting it would require migrating from renesas,cpg-clocks to renesas,cpg-mssr. Fixes: 905fc6b1bfb4a631 ("dt-bindings: rcar-vin: Convert bindings to json-schema") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/217c8197efaee7d803b22d433abb0ea8e33b84c6.1619700314.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7935bb56e21b2add81149f4def8e59b4133fe57c upstream.

The "resets" property is not present on R-Car Gen1 SoCs.
Supporting it would require migrating from renesas,cpg-clocks to
renesas,cpg-mssr.

Fixes: 905fc6b1bfb4a631 ("dt-bindings: rcar-vin: Convert bindings to json-schema")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/217c8197efaee7d803b22d433abb0ea8e33b84c6.1619700314.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties' 2021-05-14T08:52:23+00:00 dillon min dillon.minfei@gmail.com 2021-03-26T11:15:02+00:00 f7f198e5b361fc146615b1d96af6d51c54393eca [ Upstream commit 9f299d3264c67a892af87337dbaa0bdd20830c0c ] To use additional properties 'bluetooth' on serial, need replace false with 'type: object' for 'additionalProperties' to make it as a node, else will run into dtbs_check warnings. 'arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: af1c2d81695b ("dt-bindings: serial: Convert STM32 UART to json-schema") Reported-by: kernel test robot <lkp@intel.com> Tested-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1616757302-7889-8-git-send-email-dillon.minfei@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9f299d3264c67a892af87337dbaa0bdd20830c0c ]

To use additional properties 'bluetooth' on serial, need replace false with
'type: object' for 'additionalProperties' to make it as a node, else will
run into dtbs_check warnings.

'arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800:
'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: af1c2d81695b ("dt-bindings: serial: Convert STM32 UART to json-schema")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1616757302-7889-8-git-send-email-dillon.minfei@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 2021-04-10T16:10:55+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-04-10T16:10:55+00:00 12a0cf7241f9ee6b9b62e4c5aad53c43f46817a4 Pull i2c fixes from Wolfram Sang: "A mixture of driver and documentation bugfixes for I2C" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: mention Oleksij as maintainer of the binding docs i2c: exynos5: correct top kerneldoc i2c: designware: Adjust bus_freq_hz when refuse high speed mode set i2c: hix5hd2: use the correct HiSilicon copyright i2c: gpio: update email address in binding docs i2c: imx: drop me as maintainer of binding docs i2c: stm32f4: Mundane typo fix I2C: JZ4780: Fix bug for Ingenic X1000. i2c: turn recovery error on init to debug 
Pull i2c fixes from Wolfram Sang:
 "A mixture of driver and documentation bugfixes for I2C"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: mention Oleksij as maintainer of the binding docs
  i2c: exynos5: correct top kerneldoc
  i2c: designware: Adjust bus_freq_hz when refuse high speed mode set
  i2c: hix5hd2: use the correct HiSilicon copyright
  i2c: gpio: update email address in binding docs
  i2c: imx: drop me as maintainer of binding docs
  i2c: stm32f4: Mundane typo fix
  I2C: JZ4780: Fix bug for Ingenic X1000.
  i2c: turn recovery error on init to debug
Merge branch 'akpm' (patches from Andrew) 2021-04-10T00:06:32+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-04-10T00:06:32+00:00 adb2c4174fb2294bfed3b161174e8d79743f0167 Merge misc fixes from Andrew Morton: "14 patches. Subsystems affected by this patch series: mm (kasan, gup, pagecache, and kfence), MAINTAINERS, mailmap, nds32, gcov, ocfs2, ia64, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS kfence, x86: fix preemptible warning on KPTI-enabled systems lib/test_kasan_module.c: suppress unused var warning kasan: fix conflict with page poisoning fs: direct-io: fix missing sdio->boundary ia64: fix user_stack_pointer() for ptrace() ocfs2: fix deadlock between setattr and dio_end_io_write gcov: re-fix clang-11+ support nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff mm/gup: check page posion status for coredump. .mailmap: fix old email addresses mailmap: update email address for Jordan Crouse treewide: change my e-mail address, fix my name MAINTAINERS: update CZ.NIC's Turris information 
Merge misc fixes from Andrew Morton:
 "14 patches.

  Subsystems affected by this patch series: mm (kasan, gup, pagecache,
  and kfence), MAINTAINERS, mailmap, nds32, gcov, ocfs2, ia64, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS
  kfence, x86: fix preemptible warning on KPTI-enabled systems
  lib/test_kasan_module.c: suppress unused var warning
  kasan: fix conflict with page poisoning
  fs: direct-io: fix missing sdio->boundary
  ia64: fix user_stack_pointer() for ptrace()
  ocfs2: fix deadlock between setattr and dio_end_io_write
  gcov: re-fix clang-11+ support
  nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff
  mm/gup: check page posion status for coredump.
  .mailmap: fix old email addresses
  mailmap: update email address for Jordan Crouse
  treewide: change my e-mail address, fix my name
  MAINTAINERS: update CZ.NIC's Turris information