[ Upstream commit 4d276e4d3bb4a503e75086faab54f92c0a8fd368 ]

Seemingly I mis-implemented the dependencies here. The OpenSBI docs only
point out that the "riscv,event-to-mhpmcounters property is mandatory if
riscv,event-to-mhpmevent is present". It never claims that
riscv,event-to-mhpmcounters requires riscv,event-to-mhpmevent.

Drop the dependency of riscv,event-to-mhpmcounters on
riscv,event-to-mhpmevent.

Fixes: 7e38085d9c59 ("dt-bindings: riscv: add SBI PMU event mappings")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20230404-tractor-confusing-8852e552539a@spud
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dedd376e0c7096daf4171d54957a679b4dfeadbf ]

The "minItems" alone does not impose any upper limit of DMAs, so switch
it to "maxItems" which also implies same value for minItems.

Fixes: 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230317155712.99654-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 59257015ac8813d2430988aa01c2f4609a60e8e7 upstream.

The RX macro codec comes on some platforms in two variants - ADSP
and ADSP bypassed - thus the clock-names varies from 3 to 5.  The clocks
must vary as well:

  sc7280-idp.dtb: codec@3200000: clocks: [[202, 8], [202, 7], [203]] is too short

Fixes: 852fda58d99a ("ASoC: qcom: dt-bindings: Update bindings for clocks in lpass digital codes")
Cc: <stable@vger.kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330071333.24308-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull devicetree fixes from Rob Herring:

 - Fix interaction between fw_devlink and DT overlays causing devices to
   not be probed

 - Fix the compatible string for loongson,cpu-interrupt-controller

* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  treewide: Fix probing of devices in DT overlays
  dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible

The "compatible" doesn't match what the kernel is using. Fix it as
kernel using.

Fixes: 6b2748ada244 ("dt-bindings: interrupt-controller: add yaml for LoongArch CPU interrupt controller")
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20221208020954.GA3368836-robh@kernel.org/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Link: https://lore.kernel.org/r/20230401091304.12633-1-liupeibao@loongson.cn
[robh: Rename file to match compatible, fix subject typo]
Signed-off-by: Rob Herring <robh@kernel.org>

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for some reported
  problems:

   - fsl_uart driver bugfixes

   - sh-sci serial driver bugfixes

   - renesas serial driver DT binding bugfixes

   - 8250 DMA bugfix

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: sh-sci: Fix Rx on RZ/G2L SCI
  tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active
  tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty
  serial: 8250: Prevent starting up DMA Rx on THRI interrupt
  dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs
  tty: serial: sh-sci: Fix transmit end interrupt handler

Pull pin control fixes from Linus Walleij:
 "Some pin control fixes for the v6.3 series.

  The most notable and urgent one is probably the AMD fix which affects
  AMD laptops, found by the Chromium people.

  Summary:

   - Fix up the Kconfig options for MediaTek MT7981

   - Fix the irq domain name in the AT91-PIO4 driver

   - Fix some alternative muxing modes in the Ocelot driver

   - Allocate the GPIO numbers dynamically in the STM32 driver

   - Disable and mask interrupts on resume in the AMD driver

   - Fix a typo in the Qualcomm SM8550 pin control device tree bindings"

* tag 'pinctrl-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: allow input-enabled and bias-bus-hold
  pinctrl: amd: Disable and mask interrupts on resume
  pinctrl: stm32: use dynamic allocation of GPIO base
  pinctrl: ocelot: Fix alt mode for ocelot
  pinctrl: at91-pio4: fix domain name assignment
  pinctrl: mediatek: fix naming inconsistency
  pinctrl: mediatek: add missing options to PINCTRL_MT7981

The fourth interrupt on SCIF variants with four interrupts (RZ/A1) is
the Break interrupt, not the Transmit End interrupt (like on SCI(g)).
Update the description and interrupt name to fix this.

Fixes: 384d00fae8e51f8f ("dt-bindings: serial: sh-sci: Convert to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/719d1582e0ebbe3d674e3a48fc26295e1475a4c3.1679046394.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missing common pin configuration properties: input-enabled and
bias-bus-hold.

Fixes: 268e97ccc311 ("dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230324084127.29362-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

SPI EEPROMs typically support both SPI Mode 0 (CPOL=CPHA=0) and Mode 3
(CPOL=CPHA=1).  However, using the latter is currently flagged as an
error by "make dtbs_check", e.g.:

    arch/arm/boot/dts/r8a7791-koelsch.dtb: flash@0: Unevaluated properties are not allowed ('spi-cpha', 'spi-cpol' were unexpected)
	    From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml

Fix this by documenting support for CPOL=CPHA=1.

Fixes: 233363aba72ac638 ("spi/panel: dt-bindings: drop CPHA and CPOL from common properties")
Cc: stable@vger.kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/afe470603028db9374930b0c57464b1f6d52bdd3.1676384304.git.geert+renesas@glider.be