linux-stable.git/Documentation/devicetree/bindings, branch linux-6.10.y

dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems

2024-10-10T10:00:09+00:00

[ Upstream commit c6929644c1e0d6108e57061d427eb966e1746351 ]

Add missing reg minItems as based on current binding document
only ethernet MAC IO space is a supported configuration.

There is a bug in schema, current examples contain 64-bit
addressing as well as 32-bit addressing. The schema validation
does pass incidentally considering one 64-bit reg address as
two 32-bit reg address entries. If we change axi_ethernet_eth1
example node reg addressing to 32-bit schema validation reports:

Documentation/devicetree/bindings/net/xlnx,axi-ethernet.example.dtb:
ethernet@40000000: reg: [[1073741824, 262144]] is too short

To fix it add missing reg minItems constraints and to make things clearer
stick to 32-bit addressing in examples.

Fixes: cbb1ca6d5f9a ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml")
Signed-off-by: Ravikanth Tuniki 
Signed-off-by: Radhey Shyam Pandey 
Acked-by: Conor Dooley 
Link: https://patch.msgid.link/1727723615-2109795-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

dt-bindings: spi: nxp-fspi: add imx8ulp support

2024-10-04T14:33:42+00:00

commit 12736adc43b7cd5cb83f274f8f37b0f89d107c97 upstream.

The flexspi on imx8ulp only has 16 number of LUTs, it is different
with flexspi on other imx SoC which has 32 number of LUTs.

Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Acked-by: Krzysztof Kozlowski 
Signed-off-by: Haibo Chen 
Reviewed-by: Frank Li 
Link: https://patch.msgid.link/20240905094338.1986871-2-haibo.chen@nxp.com
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

dt-bindings: iio: asahi-kasei,ak8975: drop incorrect AK09116 compatible

2024-10-04T14:33:18+00:00

[ Upstream commit c7668ac67bc21aebdd8e2d7f839bfffba31b7713 ]

All compatibles in this binding without prefixes were deprecated, so
adding a new deprecated one after some time is not allowed, because it
defies the core logic of deprecating things.

Drop the AK09916 vendorless compatible.

Fixes: 76e28aa97fa0 ("iio: magnetometer: ak8975: add AK09116 support")
Signed-off-by: Krzysztof Kozlowski 
Reviewed-by: Conor Dooley 
Link: https://patch.msgid.link/20240806053016.6401-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

dt-bindings: PCI: layerscape-pci: Replace fsl,lx2160a-pcie with fsl,lx2160ar2-pcie

2024-10-04T14:33:09+00:00

[ Upstream commit 1a1bf58897d20fc38b454dfecd2771e142d36966 ]

The fsl,lx2160a-pcie compatible is used for mobivel according to the
Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt file.

Whereas the fsl,layerscape-pcie is used for DesignWare PCIe controller binding.

So change it to fsl,lx2160ar2-pcie and allow a fall back to fsl,ls2088a-pcie.

While at it, sort compatible string.

Fixes: 24cd7ecb3886 ("dt-bindings: PCI: layerscape-pci: Convert to YAML format")
Link: https://lore.kernel.org/linux-pci/20240826-2160r2-v1-1-106340d538d6@nxp.com
Signed-off-by: Frank Li 
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński 
Reviewed-by: Rob Herring (Arm) 
Signed-off-by: Sasha Levin

dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem

2024-09-12T09:13:07+00:00

commit a759d1f25182f51210c8831d71ce7ee81e0930f4 upstream.

Based on commit d8764d347bd7 ("dt-bindings: firmware: xilinx: Describe
soc-nvmem subnode") soc-nvmem should be used instead of simple nvmem that's
why also update example to have it described correctly everywhere.

Fixes: c7f99cd8fb6b ("dt-bindings: nvmem: Convert xlnx,zynqmp-nvmem.txt to yaml")
Cc: stable 
Signed-off-by: Michal Simek 
Acked-by: Rob Herring (Arm) 
Signed-off-by: Srinivas Kandagatla 
Acked-by: Conor Dooley 
Link: https://lore.kernel.org/r/20240902142510.71096-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: microchip,usb2514: Fix reference USB device schema

2024-09-04T11:30:12+00:00

commit 5b235693ed2a1e4963625717a1598becf97759cc upstream.

An USB hub is not a HCD, but an USB device. Fix the referenced schema
accordingly.

Fixes: bfbf2e4b77e2 ("dt-bindings: usb: Document the Microchip USB2514 hub")
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Alexander Stein 
Link: https://lore.kernel.org/r/20240815113132.372542-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

dt-bindings: phy: qcom,qmp-usb: fix spelling error

2024-08-03T07:00:49+00:00

commit 3d83abcae6e8fa6698f6b0a026ca650302bdbfd8 upstream.

Correct the spelling error, changing 'com' to 'qcom'.

Cc: stable@vger.kernel.org
Fixes: f75a4b3a6efc ("dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY")
Signed-off-by: Yijie Yang 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20240624021916.2033062-1-quic_yijiyang@quicinc.com
Signed-off-by: Vinod Koul 
Signed-off-by: Greg Kroah-Hartman

dt-bindings: thermal: correct thermal zone node name limit

2024-08-03T07:00:30+00:00

commit 97e32381d0fc6c2602a767b0c46e15eb2b75971d upstream.

Linux kernel uses thermal zone node name during registering thermal
zones and has a hard-coded limit of 20 characters, including terminating
NUL byte.  The bindings expect node names to finish with '-thermal'
which is eight bytes long, thus we have only 11 characters for the reset
of the node name (thus 10 for the pattern after leading fixed character).

Reported-by: Rob Herring 
Closes: https://lore.kernel.org/all/CAL_JsqKogbT_4DPd1n94xqeHaU_J8ve5K09WOyVsRX3jxxUW3w@mail.gmail.com/
Fixes: 1202a442a31f ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20240702145248.47184-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

2024-07-08T14:17:09+00:00

Qualcomm driver fixes for v6.10

UCSI support is disabled on SC8280XP while being debugged, as it's
causing the system to crash. A recent LLCC QDU1000 binding change is
reverted, to allow expressing the LLCC memory regions.

* tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
  soc: qcom: pmic_glink: disable UCSI on sc8280xp

Link: https://lore.kernel.org/r/20240702031157.341031-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann

Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"

2024-07-02T02:58:27+00:00

This reverts commit f0f99f371822c48847e02e56d6e7de507e18f186.

QDU1000 has 7 register regions. The earlier commit 8e2506d01231
("dt-bindings: cache: qcom,llcc: Add LLCC compatible for QDU1000/QRU1000")
to add llcc compatible was reflecting the same, but dtsi change for
QDU1000 was not aligning with its binding. Later, commit f0f99f371822
("dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries") was merged
intended to fix this misalignment.

After the LLCC driver refactor, each LLCC bank/channel need to be
represented as one register space to avoid mapping to the region where
access is not there. Hence, revert the commit f0f99f371822 ("dt-bindings:
cache: qcom,llcc: correct QDU1000 reg entries") to align QDU1000 llcc
binding with its dtsi node.

Signed-off-by: Komal Bajaj 
Reviewed-by: Konrad Dybcio 
Link: https://lore.kernel.org/r/20240619061641.5261-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson