Pull devicetree updates from Rob Herring:

 - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert)

 - Fix for DMA coherent devices on Power

 - Rework and simplify the DT phandle cache code

 - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART,
   STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC,
   STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010,
   DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks,
   Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI,
   Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM,
   Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI

 - New binding schemas for SATA and PATA controllers, TI and Infineon VR
   controllers, MAX31730

 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt,
   renesas,etheravb-r8a77961

 - Add USB 'super-speed-plus' as a documented speed

 - Vendor prefixes for broadmobi, calaosystems, kam, and mps

 - Clean-up the multiple flavors of ST-Ericsson vendor prefixes

* tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
  scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles"
  of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc
  dt-bindings: leds: Convert gpio-leds to DT schema
  dt-bindings: leds: Convert common LED binding to schema
  dt-bindings: PCI: Convert generic host binding to DT schema
  dt-bindings: PCI: Convert Arm Versatile binding to DT schema
  dt-bindings: Be explicit about installing deps
  dt-bindings: stm32: convert dfsdm to json-schema
  dt-bindings: serial: Convert STM32 UART to json-schema
  dt-bindings: serial: Convert rs485 bindings to json-schema
  dt-bindings: timer: Use non-empty ranges in example
  dt-bindings: arm-boards: typo fix
  dt-bindings: Add TI and Infineon VR Controllers as trivial devices
  dt-binding: usb: add "super-speed-plus"
  dt-bindings: rcar-csi2: Convert bindings to json-schema
  dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
  dt-bindings: Convert Faraday FTIDE010 to DT schema
  dt-bindings: Create DT bindings for PATA controllers
  dt-bindings: Create DT bindings for SATA controllers
  dt: bindings: add vendor prefix for Kamstrup A/S
  ...

This commit adds "super-speed-plus" to valid argument list of
"maximum-speed" property.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>

This adds support for MediaTek musb controller in
host, peripheral and otg mode.

Signed-off-by: Min Guo <min.guo@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200115132547.364-20-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NVIDIA Tegra SoCs use ChipIdea silicon IP for the USB controllers.

Acked-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106013416.9604-2-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert DWC2 bindings to DT schema format using json-schema.
DWC2 is widely use but a couple of compatibles and properties
(vusb_d-supply,vusb_a-supply) were missing in dwc2.txt, the
patch add them.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

dwc2 bindings require clock-names to be "otg".
Fix the example in amlogic,meson-g12a-usb-ctrl to follow this requirement.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>

While my email address has changed for a while, all the schemas I
contributed still have the old one unfortunately. Update it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...

Felipe writes:

USB: changes for v5.5

We have TI's glue layer for the Cadence USB3 controller going
upstream. Tegra's XUDC driver is also going upstream with this pull
request.

Apart from these two big features, we have a bunch of patches switching
over to devm_platform_ioremap_resource() in order to simplify code a
little; and a non-critical fix for DWC3 usage via kexec.

* tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (44 commits)
  usb: dwc3: of-simple: add a shutdown
  usb: cdns3: Add TI specific wrapper driver
  dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller
  usb: mtu3: fix race condition about delayed_status
  usb: gadget: Add UDC driver for tegra XUSB device mode controller
  usb: dwc3: debug: Remove newline printout
  usb: dwc2: use a longer core rest timeout in dwc2_core_reset()
  usb: gadget: udc: lpc32xx: Use devm_platform_ioremap_resource() in lpc32xx_udc_probe()
  USB: gadget: udc: clean up an indentation issue
  usb: gadget: Quieten gadget config message
  phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq
  usb: gadget: Remove set but not used variable 'opts' in msg_do_config
  usb: gadget: Remove set but not used variable 'opts' in acm_ms_do_config
  usb: mtu3: add a new function to do status stage
  usb: gadget: configfs: fix concurrent issue between composite APIs
  usb: gadget: f_tcm: Provide support to get alternate setting in tcm function
  usb: gadget: Correct NULL pointer checking in fsl gadget
  usb: fsl: Remove unused variable
  USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein
  USB: dummy-hcd: increase max number of devices to 32
  ...

Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic G12A DWC3 Glue Bindings over to a YAML schemas,
the AXG and GXL glue bindings will be converted later.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[robh: drop maxItems on vbus-supply]
Signed-off-by: Rob Herring <robh@kernel.org>