Pull pwm updates from Thierry Reding: "This contains conversions of some more drivers to the atomic API as well as the addition of new chip support for some existing drivers. There are also various minor fixes and cleanups across the board, from drivers to device tree bindings" * tag 'pwm/for-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (45 commits) pwm: rcar: Simplify multiplication/shift logic dt-bindings: pwm: renesas,tpu: Do not require pwm-cells twice dt-bindings: pwm: tiehrpwm: Do not require pwm-cells twice dt-bindings: pwm: tiecap: Do not require pwm-cells twice dt-bindings: pwm: samsung: Do not require pwm-cells twice dt-bindings: pwm: intel,keembay: Do not require pwm-cells twice dt-bindings: pwm: brcm,bcm7038: Do not require pwm-cells twice dt-bindings: pwm: toshiba,visconti: Include generic PWM schema dt-bindings: pwm: renesas,pwm: Include generic PWM schema dt-bindings: pwm: sifive: Include generic PWM schema dt-bindings: pwm: rockchip: Include generic PWM schema dt-bindings: pwm: mxs: Include generic PWM schema dt-bindings: pwm: iqs620a: Include generic PWM schema dt-bindings: pwm: intel,lgm: Include generic PWM schema dt-bindings: pwm: imx: Include generic PWM schema dt-bindings: pwm: allwinner,sun4i-a10: Include generic PWM schema pwm: pwm-mediatek: Beautify error messages text pwm: pwm-mediatek: Allocate clk_pwms with devm_kmalloc_array pwm: pwm-mediatek: Simplify error handling with dev_err_probe() pwm: brcmstb: Remove useless locking ...
Pull devicetree updates from Rob Herring: - Add Krzysztof Kozlowski as co-maintainer for DT bindings providing much needed help. - DT schema validation now takes DTB files as input rather than intermediate YAML files. This decouples the validation from the source level syntax information. There's a bunch of schema fixes as a result of switching to DTB based validation which exposed some errors and incomplete schemas and examples. - Kbuild improvements to explicitly warn users running 'make dt_binding_check' on missing yamllint - Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename or path instead of the full path to 1 file. - Convert various bindings to schema format: mscc,vsc7514-switch, multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma, msm/mdp4, rda,8810pl-uart - New schemas for u-boot environment variable partition, TI clksel - New compatible strings for Renesas RZ/V2L SoC - Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon - Add/fix schemas for QEMU Arm 'virt' machine - Drop unused of_alias_get_alias_list() function - Add a script to check DT unittest EXPECT message output. Pass messages also now print by default at PR_INFO level to help test automation. * tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits) dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable dt-bindings: nvmem: add U-Boot environment variables binding dt-bindings: ufs: qcom: Add SM6350 compatible string dt-bindings: dmaengine: sifive,fu540-c000: include generic schema dt-bindings: gpio: pca95xx: drop useless consumer example Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs" dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent' dt-bindings: gnss: Add two more chips dt-bindings: gnss: Rewrite sirfstar binding in YAML dt-bindings: gnss: Modify u-blox to use common bindings dt-bindings: gnss: Rewrite common bindings in YAML dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible dt-bindings: ata: ahci-platform: Add power-domains property dt-bindings: ata: ahci-platform: Convert DT bindings to yaml dt-bindings: kbuild: Use DTB files for validation dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate dt-bindings: Add QEMU virt machine compatible dt-bindings: arm: Convert QEMU fw-cfg to DT schema dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list dt-bindings: i2c: convert i2c-at91 to json-schema ...
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
Pull clocksource/events updates from Daniel Lezcano:
- Fix return error code check for the timer-of layer when getting
the base address (Guillaume Ranquet)
- Remove MMIO dependency, add notrace annotation for sched_clock
and increase the timer resolution for the Microchip
PIT64b (Claudiu Beznea)
- Convert DT bindings to yaml for the Tegra timer (David Heidelberg)
- Fix compilation error on architecture other than ARM for the
i.MX TPM (Nathan Chancellor)
- Add support for the event stream scaling for 1GHz counter on
the arch ARM timer (Marc Zyngier)
- Support a higher number of interrupts by the Exynos MCT timer
driver (Alim Akhtar)
- Detect and prevent memory corruption when the specified number
of interrupts in the DTS is greater than the array size in the
code for the Exynos MCT timer (Krzysztof Kozlowski)
- Fix regression from a previous errata fix on the TI DM
timer (Drew Fustini)
- Several fixes and code improvements for the i.MX TPM
driver (Peng Fan)
Link: https://lore.kernel.org/all/a8cd9be9-7d70-80df-2b74-1a8226a215e1@linaro.org
Convert Tegra timer binding into yaml format. This commit also merge 3 text bindings with almost identical content (differens in number of registers). Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20220303233307.61753-1-david@ixit.cz Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit RISC target designed by Andes Technologies. Support was added to the kernel in 2016 as the replacement RISC-V based V5 processors were already announced, and maintained by (current or former) Andes employees. As explained by Alan Kao, new customers are now all using RISC-V, and all known nds32 users are already on longterm stable kernels provided by Andes, with no development work going into mainline support any more. While the port is still in a reasonably good shape, it only gets worse over time without active maintainers, so it seems best to remove it before it becomes unusable. As always, if it turns out that there are mainline users after all, and they volunteer to maintain the port in the future, the removal can be reverted. Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/ Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/ Link: https://www.andestech.com/en/products-solutions/andestar-architecture/ Signed-off-by: Alan Kao <alankao@andestech.com> [arnd: rewrite changelog to provide more background] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document the General Timer Module(a.k.a OSTM) found on the RZ/V2L SoC. OSTM module is identical to one found RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,ostm" will be used as a fallback. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220227224845.27348-1-prabhakar.mahadev-lad.rj@bp.renesas.com
To improve human readability and enable automatic validation, the tuples in "interrupts-extended" properties should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/62bf4ee6613550c07a99d4bd226ab0d33acae4c4.1643360652.git.geert@linux-m68k.org
The number of interrupts lacks an upper bound, thus assuming one, causing properly grouped "interrupts-extended" properties to be flagged as an error by "make dtbs_check". Fix this by adding the missing "maxItems", using the architectural maximum of 4095 interrupts. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/e6a4c5b20d2acb52125d7d6e6c7e3694d7cb182c.1643360652.git.geert@linux-m68k.org