linux-stable.git/Documentation/devicetree/bindings/soc, branch linux-rolling-lts Linux kernel stable tree dt-bindings: soc: bcm: Add bcm2712 compatible 2026-06-01T15:50:38+00:00 Stanimir Varbanov svarbanov@suse.de 2025-10-31T18:33:07+00:00 375d5a17dc8d7668c2479dc4cd329838c58d8e4f commit 34194cb385033656d347ebe45c241e4739a58125 upstream. Add bcm2712-pm compatible and update the bindings to satisfy it's requirements. The PM hardware block inside bcm2712 lacks the "asb" and "rpivid_asb" register ranges and also does not have clocks, update the bindings accordingly. Signed-off-by: Stanimir Varbanov <svarbanov@suse.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 34194cb385033656d347ebe45c241e4739a58125 upstream.

Add bcm2712-pm compatible and update the bindings to satisfy it's
requirements. The PM hardware block inside bcm2712 lacks the "asb"
and "rpivid_asb" register ranges and also does not have clocks, update
the bindings accordingly.

Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy 2025-10-06T17:34:22+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-06T17:34:22+00:00 1d1ba4d390141d602dbce8f5f0ac19a384d10a64 Pull phy updates from Vinod Koul: "The usual bunch of device support and update to drivers. New Support - Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2 repeater support, QCS8300 eDP PHY support - Renesas RZ/T2H and RZ/N2H support and updates to driver for that - TI TCAN1051 phy support - Rockchip rk3588 dphy support, RK3528 combphy support Updates: - cadence updates for calibration and polling for ready and enabling of lower resolutions, runtime pm support, - Rockchip: enable U3 otg port - Renesas USXGMII mode support - Qualcomm UFS PHY and PLL regulator load support" * tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (64 commits) phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant phy: rockchip: phy-rockchip-inno-csidphy: allow for different reset lines phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0 dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required phy: cadence: cdns-dphy: Enable lower resolutions in dphy phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet phy: renesas: r8a779f0-ether-serdes: add USXGMII mode phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X dt-bindings: phy: Add Sophgo CV1800 USB phy phy: cadence: cdns-dphy: Update calibration wait time for startup state machine phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051 phy: lynx-28g: check return value when calling lynx_28g_pll_get phy: qcom: m31-eusb2: Fix the error log while enabling clock phy: rockchip: usbdp: Remove redundant ternary operators phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators phy: hisilicon: Remove redundant ternary operators phy: qcom-qmp-ufs: Add PHY and PLL regulator load ... 
Pull phy updates from Vinod Koul:
 "The usual bunch of device support and update to drivers.

  New Support
   - Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2
     repeater support, QCS8300 eDP PHY support
   - Renesas RZ/T2H and RZ/N2H support and updates to driver for that
   - TI TCAN1051 phy support
   - Rockchip rk3588 dphy support, RK3528 combphy support

  Updates:
   - cadence updates for calibration and polling for ready and enabling
     of lower resolutions, runtime pm support,
   - Rockchip: enable U3 otg port
   - Renesas USXGMII mode support
   - Qualcomm UFS PHY and PLL regulator load support"

* tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (64 commits)
  phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant
  phy: rockchip: phy-rockchip-inno-csidphy: allow for different reset lines
  phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0
  dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant
  dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required
  phy: cadence: cdns-dphy: Enable lower resolutions in dphy
  phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
  phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
  phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X
  dt-bindings: phy: Add Sophgo CV1800 USB phy
  phy: cadence: cdns-dphy: Update calibration wait time for startup state machine
  phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
  phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid
  dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
  phy: lynx-28g: check return value when calling lynx_28g_pll_get
  phy: qcom: m31-eusb2: Fix the error log while enabling clock
  phy: rockchip: usbdp: Remove redundant ternary operators
  phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators
  phy: hisilicon: Remove redundant ternary operators
  phy: qcom-qmp-ufs: Add PHY and PLL regulator load
  ...
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2025-10-02T22:17:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-02T22:17:01+00:00 07fdad3a93756b872da7b53647715c48d0f4a2d0 Pull networking updates from Paolo Abeni: "Core & protocols: - Improve drop account scalability on NUMA hosts for RAW and UDP sockets and the backlog, almost doubling the Pps capacity under DoS - Optimize the UDP RX performance under stress, reducing contention, revisiting the binary layout of the involved data structs and implementing NUMA-aware locking. This improves UDP RX performance by an additional 50%, even more under extreme conditions - Add support for PSP encryption of TCP connections; this mechanism has some similarities with IPsec and TLS, but offers superior HW offloads capabilities - Ongoing work to support Accurate ECN for TCP. AccECN allows more than one congestion notification signal per RTT and is a building block for Low Latency, Low Loss, and Scalable Throughput (L4S) - Reorganize the TCP socket binary layout for data locality, reducing the number of touched cachelines in the fastpath - Refactor skb deferral free to better scale on large multi-NUMA hosts, this improves TCP and UDP RX performances significantly on such HW - Increase the default socket memory buffer limits from 256K to 4M to better fit modern link speeds - Improve handling of setups with a large number of nexthop, making dump operating scaling linearly and avoiding unneeded synchronize_rcu() on delete - Improve bridge handling of VLAN FDB, storing a single entry per bridge instead of one entry per port; this makes the dump order of magnitude faster on large switches - Restore IP ID correctly for encapsulated packets at GSO segmentation time, allowing GRO to merge packets in more scenarios - Improve netfilter matching performance on large sets - Improve MPTCP receive path performance by leveraging recently introduced core infrastructure (skb deferral free) and adopting recent TCP autotuning changes - Allow bridges to redirect to a backup port when the bridge port is administratively down - Introduce MPTCP 'laminar' endpoint that con be used only once per connection and simplify common MPTCP setups - Add RCU safety to dst->dev, closing a lot of possible races - A significant crypto library API for SCTP, MPTCP and IPv6 SR, reducing code duplication - Supports pulling data from an skb frag into the linear area of an XDP buffer Things we sprinkled into general kernel code: - Generate netlink documentation from YAML using an integrated YAML parser Driver API: - Support using IPv6 Flow Label in Rx hash computation and RSS queue selection - Introduce API for fetching the DMA device for a given queue, allowing TCP zerocopy RX on more H/W setups - Make XDP helpers compatible with unreadable memory, allowing more easily building DevMem-enabled drivers with a unified XDP/skbs datapath - Add a new dedicated ethtool callback enabling drivers to provide the number of RX rings directly, improving efficiency and clarity in RX ring queries and RSS configuration - Introduce a burst period for the health reporter, allowing better handling of multiple errors due to the same root cause - Support for DPLL phase offset exponential moving average, controlling the average smoothing factor Device drivers: - Add a new Huawei driver for 3rd gen NIC (hinic3) - Add a new SpacemiT driver for K1 ethernet MAC - Add a generic abstraction for shared memory communication devices (dibps) - Ethernet high-speed NICs: - nVidia/Mellanox: - Use multiple per-queue doorbell, to avoid MMIO contention issues - support adjacent functions, allowing them to delegate their SR-IOV VFs to sibling PFs - support RSS for IPSec offload - support exposing raw cycle counters in PTP and mlx5 - support for disabling host PFs. - Intel (100G, ice, idpf): - ice: support for SRIOV VFs over an Active-Active link aggregate - ice: support for firmware logging via debugfs - ice: support for Earliest TxTime First (ETF) hardware offload - idpf: support basic XDP functionalities and XSk - Broadcom (bnxt): - support Hyper-V VF ID - dynamic SRIOV resource allocations for RoCE - Meta (fbnic): - support queue API, zero-copy Rx and Tx - support basic XDP functionalities - devlink health support for FW crashes and OTP mem corruptions - expand hardware stats coverage to FEC, PHY, and Pause - Wangxun: - support ethtool coalesce options - support for multiple RSS contexts - Ethernet virtual: - Macsec: - replace custom netlink attribute checks with policy-level checks - Bonding: - support aggregator selection based on port priority - Microsoft vNIC: - use page pool fragments for RX buffers instead of full pages to improve memory efficiency - Ethernet NICs consumer, and embedded: - Qualcomm: support Ethernet function for IPQ9574 SoC - Airoha: implement wlan offloading via NPU - Freescale - enetc: add NETC timer PTP driver and add PTP support - fec: enable the Jumbo frame support for i.MX8QM - Renesas (R-Car S4): - support HW offloading for layer 2 switching - support for RZ/{T2H, N2H} SoCs - Cadence (macb): support TAPRIO traffic scheduling - TI: - support for Gigabit ICSS ethernet SoC (icssm-prueth) - Synopsys (stmmac): a lot of cleanups - Ethernet PHYs: - Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS driver - Support bcm63268 GPHY power control - Support for Micrel lan8842 PHY and PTP - Support for Aquantia AQR412 and AQR115 - CAN: - a large CAN-XL preparation work - reorganize raw_sock and uniqframe struct to minimize memory usage - rcar_canfd: update the CAN-FD handling - WiFi: - extended Neighbor Awareness Networking (NAN) support - S1G channel representation cleanup - improve S1G support - WiFi drivers: - Intel (iwlwifi): - major refactor and cleanup - Broadcom (brcm80211): - support for AP isolation - RealTek (rtw88/89) rtw88/89: - preparation work for RTL8922DE support - MediaTek (mt76): - HW restart improvements - MLO support - Qualcomm/Atheros (ath10k): - GTK rekey fixes - Bluetooth drivers: - btusb: support for several new IDs for MT7925 - btintel: support for BlazarIW core - btintel_pcie: support for _suspend() / _resume() - btintel_pcie: support for Scorpious, Panther Lake-H484 IDs" * tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits) net: stmmac: Add support for Allwinner A523 GMAC200 dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible Revert "Documentation: net: add flow control guide and document ethtool API" octeontx2-pf: fix bitmap leak octeontx2-vf: fix bitmap leak net/mlx5e: Use extack in set rxfh callback net/mlx5e: Introduce mlx5e_rss_params for RSS configuration net/mlx5e: Introduce mlx5e_rss_init_params net/mlx5e: Remove unused mdev param from RSS indir init net/mlx5: Improve QoS error messages with actual depth values net/mlx5e: Prevent entering switchdev mode with inconsistent netns net/mlx5: HWS, Generalize complex matchers net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs selftests/net: add tcp_port_share to .gitignore Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set" net: add NUMA awareness to skb_attempt_defer_free() net: use llist for sd->defer_list net: make softnet_data.defer_count an atomic selftests: drv-net: psp: add tests for destroying devices selftests: drv-net: psp: add test for auto-adjusting TCP MSS ... 
Pull networking updates from Paolo Abeni:
 "Core & protocols:

   - Improve drop account scalability on NUMA hosts for RAW and UDP
     sockets and the backlog, almost doubling the Pps capacity under DoS

   - Optimize the UDP RX performance under stress, reducing contention,
     revisiting the binary layout of the involved data structs and
     implementing NUMA-aware locking. This improves UDP RX performance
     by an additional 50%, even more under extreme conditions

   - Add support for PSP encryption of TCP connections; this mechanism
     has some similarities with IPsec and TLS, but offers superior HW
     offloads capabilities

   - Ongoing work to support Accurate ECN for TCP. AccECN allows more
     than one congestion notification signal per RTT and is a building
     block for Low Latency, Low Loss, and Scalable Throughput (L4S)

   - Reorganize the TCP socket binary layout for data locality, reducing
     the number of touched cachelines in the fastpath

   - Refactor skb deferral free to better scale on large multi-NUMA
     hosts, this improves TCP and UDP RX performances significantly on
     such HW

   - Increase the default socket memory buffer limits from 256K to 4M to
     better fit modern link speeds

   - Improve handling of setups with a large number of nexthop, making
     dump operating scaling linearly and avoiding unneeded
     synchronize_rcu() on delete

   - Improve bridge handling of VLAN FDB, storing a single entry per
     bridge instead of one entry per port; this makes the dump order of
     magnitude faster on large switches

   - Restore IP ID correctly for encapsulated packets at GSO
     segmentation time, allowing GRO to merge packets in more scenarios

   - Improve netfilter matching performance on large sets

   - Improve MPTCP receive path performance by leveraging recently
     introduced core infrastructure (skb deferral free) and adopting
     recent TCP autotuning changes

   - Allow bridges to redirect to a backup port when the bridge port is
     administratively down

   - Introduce MPTCP 'laminar' endpoint that con be used only once per
     connection and simplify common MPTCP setups

   - Add RCU safety to dst->dev, closing a lot of possible races

   - A significant crypto library API for SCTP, MPTCP and IPv6 SR,
     reducing code duplication

   - Supports pulling data from an skb frag into the linear area of an
     XDP buffer

  Things we sprinkled into general kernel code:

   - Generate netlink documentation from YAML using an integrated YAML
     parser

  Driver API:

   - Support using IPv6 Flow Label in Rx hash computation and RSS queue
     selection

   - Introduce API for fetching the DMA device for a given queue,
     allowing TCP zerocopy RX on more H/W setups

   - Make XDP helpers compatible with unreadable memory, allowing more
     easily building DevMem-enabled drivers with a unified XDP/skbs
     datapath

   - Add a new dedicated ethtool callback enabling drivers to provide
     the number of RX rings directly, improving efficiency and clarity
     in RX ring queries and RSS configuration

   - Introduce a burst period for the health reporter, allowing better
     handling of multiple errors due to the same root cause

   - Support for DPLL phase offset exponential moving average,
     controlling the average smoothing factor

  Device drivers:

   - Add a new Huawei driver for 3rd gen NIC (hinic3)

   - Add a new SpacemiT driver for K1 ethernet MAC

   - Add a generic abstraction for shared memory communication
     devices (dibps)

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - Use multiple per-queue doorbell, to avoid MMIO contention
           issues
         - support adjacent functions, allowing them to delegate their
           SR-IOV VFs to sibling PFs
         - support RSS for IPSec offload
         - support exposing raw cycle counters in PTP and mlx5
         - support for disabling host PFs.
      - Intel (100G, ice, idpf):
         - ice: support for SRIOV VFs over an Active-Active link
           aggregate
         - ice: support for firmware logging via debugfs
         - ice: support for Earliest TxTime First (ETF) hardware offload
         - idpf: support basic XDP functionalities and XSk
      - Broadcom (bnxt):
         - support Hyper-V VF ID
         - dynamic SRIOV resource allocations for RoCE
      - Meta (fbnic):
         - support queue API, zero-copy Rx and Tx
         - support basic XDP functionalities
         - devlink health support for FW crashes and OTP mem corruptions
         - expand hardware stats coverage to FEC, PHY, and Pause
      - Wangxun:
         - support ethtool coalesce options
         - support for multiple RSS contexts

   - Ethernet virtual:
      - Macsec:
         - replace custom netlink attribute checks with policy-level
           checks
      - Bonding:
         - support aggregator selection based on port priority
      - Microsoft vNIC:
         - use page pool fragments for RX buffers instead of full pages
           to improve memory efficiency

   - Ethernet NICs consumer, and embedded:
      - Qualcomm: support Ethernet function for IPQ9574 SoC
      - Airoha: implement wlan offloading via NPU
      - Freescale
         - enetc: add NETC timer PTP driver and add PTP support
         - fec: enable the Jumbo frame support for i.MX8QM
      - Renesas (R-Car S4):
         - support HW offloading for layer 2 switching
         - support for RZ/{T2H, N2H} SoCs
      - Cadence (macb): support TAPRIO traffic scheduling
      - TI:
         - support for Gigabit ICSS ethernet SoC (icssm-prueth)
      - Synopsys (stmmac): a lot of cleanups

   - Ethernet PHYs:
      - Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
        driver
      - Support bcm63268 GPHY power control
      - Support for Micrel lan8842 PHY and PTP
      - Support for Aquantia AQR412 and AQR115

   - CAN:
      - a large CAN-XL preparation work
      - reorganize raw_sock and uniqframe struct to minimize memory
        usage
      - rcar_canfd: update the CAN-FD handling

   - WiFi:
      - extended Neighbor Awareness Networking (NAN) support
      - S1G channel representation cleanup
      - improve S1G support

   - WiFi drivers:
      - Intel (iwlwifi):
         - major refactor and cleanup
      - Broadcom (brcm80211):
         - support for AP isolation
      - RealTek (rtw88/89) rtw88/89:
         - preparation work for RTL8922DE support
      - MediaTek (mt76):
         - HW restart improvements
         - MLO support
      - Qualcomm/Atheros (ath10k):
         - GTK rekey fixes

   - Bluetooth drivers:
      - btusb: support for several new IDs for MT7925
      - btintel: support for BlazarIW core
      - btintel_pcie: support for _suspend() / _resume()
      - btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"

* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
  net: stmmac: Add support for Allwinner A523 GMAC200
  dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
  Revert "Documentation: net: add flow control guide and document ethtool API"
  octeontx2-pf: fix bitmap leak
  octeontx2-vf: fix bitmap leak
  net/mlx5e: Use extack in set rxfh callback
  net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
  net/mlx5e: Introduce mlx5e_rss_init_params
  net/mlx5e: Remove unused mdev param from RSS indir init
  net/mlx5: Improve QoS error messages with actual depth values
  net/mlx5e: Prevent entering switchdev mode with inconsistent netns
  net/mlx5: HWS, Generalize complex matchers
  net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
  selftests/net: add tcp_port_share to .gitignore
  Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
  net: add NUMA awareness to skb_attempt_defer_free()
  net: use llist for sd->defer_list
  net: make softnet_data.defer_count an atomic
  selftests: drv-net: psp: add tests for destroying devices
  selftests: drv-net: psp: add test for auto-adjusting TCP MSS
  ...
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2025-10-02T00:32:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-02T00:32:51+00:00 38057e323657695ec8f814aff0cdd1c7e00d3e9b Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ... 
Pull SoC driver updates from Arnd Bergmann:
 "Lots of platform specific updates for Qualcomm SoCs, including a new
  TEE subsystem driver for the Qualcomm QTEE firmware interface.

  Added support for the Apple A11 SoC in drivers that are shared with
  the M1/M2 series, among more updates for those.

  Smaller platform specific driver updates for Renesas, ASpeed,
  Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
  SoCs.

  Driver updates in the cache controller, memory controller and reset
  controller subsystems.

  SCMI firmware updates to add more features and improve robustness.
  This includes support for having multiple SCMI providers in a single
  system.

  TEE subsystem support for protected DMA-bufs, allowing hardware to
  access memory areas that managed by the kernel but remain inaccessible
  from the CPU in EL1/EL0"

* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
  soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
  soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
  soc: fsl: qe: Change GPIO driver to a proper platform driver
  tee: fix register_shm_helper()
  pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
  dt-bindings: spmi: Add Apple A11 and T2 compatible
  serial: qcom-geni: Load UART qup Firmware from linux side
  spi: geni-qcom: Load spi qup Firmware from linux side
  i2c: qcom-geni: Load i2c qup Firmware from linux side
  soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
  soc: qcom: geni-se: Cleanup register defines and update copyright
  dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
  Documentation: tee: Add Qualcomm TEE driver
  tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
  tee: qcom: add primordial object
  tee: add Qualcomm TEE driver
  tee: increase TEE_MAX_ARG_SIZE to 4096
  tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
  tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
  tee: add close_context to TEE driver operation
  ...
Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2025-10-02T00:19:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-02T00:19:38+00:00 0f048c878ee32a4259dbf28e0ad8fd0b71ee0085 Pull SoC dt updates from Arnd Bergmann: "There are five sets of new SoCs that get added in existing families, all of them being either upgrades or cut-down versions of the older chips: - Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation of high-end workstations and laptops from Apple. Linux has been working on these for a while but stil requires patches. - Axis Artpec8 is an Armv8 chip based on Samsung Exynos design, unlike the earlier Armv7 Artpec6 from the same company that was part of a separate family of chips. - NXP i.MX91 is a cut-down version of i.MX93, using only a single Cortex-A55 core. - Qualcomm Lemans Auto is a variant of the Lemans SoC that was originally merged under the sa8775p name, the differences being mostly the firmware configuration of the platform. - Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44), RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial bedded SoCs based on Cortex-A55 cores In total, there are 65 new machines, including: - Industrial embedded system and single-board computers based on NXP, Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips. - Reference boards for the newly added Renesas, Qualcomm, NXP and Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC - Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1 chips. - Several Samsung phones using Qualcomm Snapdragon chips - Set-top boxes based on Allwinner H313 - Five BMC boards using 32-bit ASpeed SoCs - Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708 (ARMv7) SoCs Two machines get phased out because they were available only in small quantities but never made it into products: one STi407 based reference board, and a Snapdragon 845 based Chromebook. Aside from the newly added machines, a lot of work went into improving hardware support on the existing machines and cleaning up contents for validation" * tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits) arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node ARM: dts: microchip: sam9x7: Add qspi controller arm64: dts: qcom: Add MST pixel streams for displayport arm64: dts: qcom: sm6350: correct DP compatibility strings arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU arm64: dts: qcom: qcs8300: Add gpu and gmu nodes arm64: dts: allwinner: h313: Add Amediatech X96Q dt-bindings: arm: sunxi: Add Amediatech X96Q arm64: dts: apple: t8015: Add SPMI node arm64: dts: apple: t8012: Add SPMI node arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT arm64: dts: rockchip: update pinctrl names for Radxa E52C arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C arm64: dts: apple: Add J474s, J475c and J475d device trees arm64: dts: apple: Add J414 and J416 Macbook Pro device trees arm64: dts: apple: Add initial t6020/t6021/t6022 DTs ... 
Pull SoC dt updates from Arnd Bergmann:
 "There are five sets of new SoCs that get added in existing families,
  all of them being either upgrades or cut-down versions of the older
  chips:

   - Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
     of high-end workstations and laptops from Apple. Linux has been
     working on these for a while but stil requires patches.

   - Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
     unlike the earlier Armv7 Artpec6 from the same company that was
     part of a separate family of chips.

   - NXP i.MX91 is a cut-down version of i.MX93, using only a single
     Cortex-A55 core.

   - Qualcomm Lemans Auto is a variant of the Lemans SoC that was
     originally merged under the sa8775p name, the differences being
     mostly the firmware configuration of the platform.

   - Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
     RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
     bedded SoCs based on Cortex-A55 cores

  In total, there are 65 new machines, including:

   - Industrial embedded system and single-board computers based on NXP,
     Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.

   - Reference boards for the newly added Renesas, Qualcomm, NXP and
     Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC

   - Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
     chips.

   - Several Samsung phones using Qualcomm Snapdragon chips

   - Set-top boxes based on Allwinner H313

   - Five BMC boards using 32-bit ASpeed SoCs

   - Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
     (ARMv7) SoCs

  Two machines get phased out because they were available only in small
  quantities but never made it into products: one STi407 based reference
  board, and a Snapdragon 845 based Chromebook.

  Aside from the newly added machines, a lot of work went into improving
  hardware support on the existing machines and cleaning up contents for
  validation"

* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
  arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
  arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
  ARM: dts: microchip: sam9x7: Add qspi controller
  arm64: dts: qcom: Add MST pixel streams for displayport
  arm64: dts: qcom: sm6350: correct DP compatibility strings
  arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
  arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
  arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
  arm64: dts: allwinner: h313: Add Amediatech X96Q
  dt-bindings: arm: sunxi: Add Amediatech X96Q
  arm64: dts: apple: t8015: Add SPMI node
  arm64: dts: apple: t8012: Add SPMI node
  arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
  arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
  dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
  arm64: dts: rockchip: update pinctrl names for Radxa E52C
  arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
  arm64: dts: apple: Add J474s, J475c and J475d device trees
  arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
  arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
  ...
Merge tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2025-10-01T23:58:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-01T23:58:24+00:00 9792d660a4e91d31a6b1af105ae3f1c29107e94b Pull devicetree updates from Rob Herring: "DT core: - Update dtc to upstream version v1.7.2-35-g52f07dcca47c - Add stub for of_get_next_child_with_prefix() - Convert of_msi_map_id() callers to of_msi_xlate() DT bindings: - Convert multiple text board bindings to DT schema format - Add bindings for synaptics,synaptics_i2c touchscreen controller, innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP vf610 reboot controller - Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and fsl,soc-operating-points properties for CPU nodes. - Add QCom Glymur PDC and tegra264-agic interrupt controllers - Add samsung,exynos8890-mali GPU to Arm Mali Midgard - Drop Samsung S3C2410 display related bindings - Allow separate DP lane and AUX connections in dp-connector - Add some missing, undocumented vendor prefixes - Add missing '#address-cells' properties in interrupt controller bindings which dtc now warns about - Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt, fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text bindings which are already covered by existing schemas. - Various binding fixes for Mediatek platforms in mailbox, regulator, pinctrl, timer, and display - Drop work-around for yamllint quoting of values containing ',' - Various spelling, typo, grammar, and duplicated words fixes in DT bindings and docs - Add binding guidelines for defining properties at top level of schemas, lack of node name ABI, and usage of simple-mfd" * tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits) dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt dt-bindings: gpu: Convert nvidia,gk20a to DT schema dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema dt-bindings: vendor-prefixes: update regex for properties without a prefix dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml scripts: dt_to_config: fix grammar and a typo in --help text dt-bindings: fix spelling, typos, grammar, duplicated words docs: dt: fix grammar and spelling of: base: Add of_get_next_child_with_prefix() stub dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c dt-bindings: soc: mediatek: pwrap: Add power-domains property dt-bindings: pinctrl: mt65xx: Allow gpio-line-names dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema dt-bindings: arm: mediatek: Support mt8183-audiosys variant dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional dt-bindings: regulator: mediatek,mt6331: Add missing compatible dt-bindings: regulator: mediatek,mt6331: Fix various regulator names dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2 ... 
Pull devicetree updates from Rob Herring:
 "DT core:

   - Update dtc to upstream version v1.7.2-35-g52f07dcca47c

   - Add stub for of_get_next_child_with_prefix()

   - Convert of_msi_map_id() callers to of_msi_xlate()

 DT bindings:

   - Convert multiple text board bindings to DT schema format

   - Add bindings for synaptics,synaptics_i2c touchscreen controller,
     innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
     vf610 reboot controller

   - Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
     CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
     fsl,soc-operating-points properties for CPU nodes.

   - Add QCom Glymur PDC and tegra264-agic interrupt controllers

   - Add samsung,exynos8890-mali GPU to Arm Mali Midgard

   - Drop Samsung S3C2410 display related bindings

   - Allow separate DP lane and AUX connections in dp-connector

   - Add some missing, undocumented vendor prefixes

   - Add missing '#address-cells' properties in interrupt controller
     bindings which dtc now warns about

   - Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
     fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
     bindings which are already covered by existing schemas.

   - Various binding fixes for Mediatek platforms in mailbox, regulator,
     pinctrl, timer, and display

   - Drop work-around for yamllint quoting of values containing ','

   - Various spelling, typo, grammar, and duplicated words fixes in DT
     bindings and docs

   - Add binding guidelines for defining properties at top level of
     schemas, lack of node name ABI, and usage of simple-mfd"

* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
  dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
  dt-bindings: gpu: Convert nvidia,gk20a to DT schema
  dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
  dt-bindings: vendor-prefixes: update regex for properties without a prefix
  dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
  scripts: dt_to_config: fix grammar and a typo in --help text
  dt-bindings: fix spelling, typos, grammar, duplicated words
  docs: dt: fix grammar and spelling
  of: base: Add of_get_next_child_with_prefix() stub
  dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
  dt-bindings: soc: mediatek: pwrap: Add power-domains property
  dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
  dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
  dt-bindings: arm: mediatek: Support mt8183-audiosys variant
  dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
  dt-bindings: regulator: mediatek,mt6331: Add missing compatible
  dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
  dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
  dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
  dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
  ...
Merge tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply 2025-10-01T20:02:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-01T20:02:59+00:00 3ee22ad492a49303f54d4e1c5168327742ac7aaf Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - introduce adc-battery-helper for capacity estimation based on simple ADC readings of battery voltage and current - add new properties for battery internal resistance and state of health Power-supply drivers: - ug3105_battery: convert to adc-battery-helper - intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries - rt9467-charger: add voltage and current ADC support - sbs-charger: support multiple instances - qcom_battmgr: - add charge control support - add support for state of health and internal resistance - max77705_charger: - big driver cleanup - add support for setting charge current - misc minor fixes and cleanups" * tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits) power: supply: qcom_battmgr: handle charging state change notifications power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro power: supply: max77705_charger: rework interrupts power: supply: max77705_charger: add writable properties power: supply: max77705_charger: return error when config fails power: supply: max77705_charger: use regfields for config registers power: supply: max77705_charger: refactoring: rename charger to chg mfd: max77705: max77705_charger: move active discharge setting to mfd parent power: supply: max77976_charger: fix constant current reporting power: supply: qcom_battmgr: Add charge control support dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties power: supply: qcom_battmgr: update compats for SM8550 and X1E80100 power: supply: qcom_battmgr: Add state_of_health property power: supply: qcom_battmgr: Add resistance power supply property power: supply: core: Add state_of_health power supply property power: supply: core: Add resistance power supply property power: supply: rx51: remove redundant condition checks dt-bindings: power: supply: bq24190: document charge enable pin dt-bindings: power: supply: bq27xxx: document optional interrupt power: supply: intel_dc_ti_battery: Drop no longer relevant comment ... 
Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - introduce adc-battery-helper for capacity estimation based on
     simple ADC readings of battery voltage and current
   - add new properties for battery internal resistance and state of
     health

  Power-supply drivers:
   - ug3105_battery: convert to adc-battery-helper
   - intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
   - rt9467-charger: add voltage and current ADC support
   - sbs-charger: support multiple instances
   - qcom_battmgr:
       - add charge control support
       - add support for state of health and internal resistance
   - max77705_charger:
       - big driver cleanup
       - add support for setting charge current
   - misc minor fixes and cleanups"

* tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
  power: supply: qcom_battmgr: handle charging state change notifications
  power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro
  power: supply: max77705_charger: rework interrupts
  power: supply: max77705_charger: add writable properties
  power: supply: max77705_charger: return error when config fails
  power: supply: max77705_charger: use regfields for config registers
  power: supply: max77705_charger: refactoring: rename charger to chg
  mfd: max77705: max77705_charger: move active discharge setting to mfd parent
  power: supply: max77976_charger: fix constant current reporting
  power: supply: qcom_battmgr: Add charge control support
  dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties
  power: supply: qcom_battmgr: update compats for SM8550 and X1E80100
  power: supply: qcom_battmgr: Add state_of_health property
  power: supply: qcom_battmgr: Add resistance power supply property
  power: supply: core: Add state_of_health power supply property
  power: supply: core: Add resistance power supply property
  power: supply: rx51: remove redundant condition checks
  dt-bindings: power: supply: bq24190: document charge enable pin
  dt-bindings: power: supply: bq27xxx: document optional interrupt
  power: supply: intel_dc_ti_battery: Drop no longer relevant comment
  ...
dt-bindings: soc: mediatek: pwrap: Add power-domains property 2025-09-26T19:50:44+00:00 Ariel D'Alessandro ariel.dalessandro@collabora.com 2025-09-11T15:10:00+00:00 18b26b15178386eb82bca4b23b03e96ca9317d36 Currently, the DT bindings for Mediatek PMIC Wrapper is missing the power-domains property, which is used in the MT8173 E1 evaluation board as it needs USB power domain. Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> 
Currently, the DT bindings for Mediatek PMIC Wrapper is missing the
power-domains property, which is used in the MT8173 E1 evaluation board as
it needs USB power domain.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Merge tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers 2025-09-23T20:56:36+00:00 Arnd Bergmann arnd@arndb.de 2025-09-23T20:56:29+00:00 3783cdc1df6d4b4337865ceb6709f8f4efed4318 More Qualcomm device driver updates for v6.18 Introduce support for loading firmware into the QUP serial engines from Linux, which allows deferring selection of which protocol (uart, i2c, spi, etc) a given SE should have until the OS loads. Also introduce the "object invoke" interface in the SCM driver, to provide interface to the Qualcomm TEE driver. * tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus firmware: qcom: scm: add support for object invocation firmware: qcom: tzmem: export shm_bridge create/delete Link: https://lore.kernel.org/r/20250921020225.595403-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
More Qualcomm device driver updates for v6.18

Introduce support for loading firmware into the QUP serial engines from
Linux, which allows deferring selection of which protocol (uart, i2c,
spi, etc) a given SE should have until the OS loads.

Also introduce the "object invoke" interface in the SCM driver, to
provide interface to the Qualcomm TEE driver.

* tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  serial: qcom-geni: Load UART qup Firmware from linux side
  spi: geni-qcom: Load spi qup Firmware from linux side
  i2c: qcom-geni: Load i2c qup Firmware from linux side
  soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
  soc: qcom: geni-se: Cleanup register defines and update copyright
  dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
  firmware: qcom: scm: add support for object invocation
  firmware: qcom: tzmem: export shm_bridge create/delete

Link: https://lore.kernel.org/r/20250921020225.595403-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'v6.18-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt 2025-09-23T20:47:31+00:00 Arnd Bergmann arnd@arndb.de 2025-09-23T20:47:26+00:00 d1f862c0b960c0ed631ed3c631681f30ec1d77fd One new board the ROC-RK3588-RT, gpu improvements for RK3328, frequency scaling for the RK3528 and the very first small steps for camera support on the RK3588 - with the CSI-DPHY support, with more hopefully to come soon'ish :-) . And apart from those bigger points, some more individual peripheral work on some boards. * tag 'v6.18-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT arm64: dts: rockchip: update pinctrl names for Radxa E52C arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C arm64: dts: rockchip: Add USB and charger to Gameforce Ace arm64: dts: rockchip: enable the Mali GPU on RK3328 boards arm64: dts: rockchip: add GPU powerdomain, opps, and cooling to rk3328 arm64: dts: rockchip: Fix network on rk3576 evb1 board arm64: dts: rockchip: add mipi csi-2 dphy nodes to rk3588 dt-bindings: soc: rockchip: add rk3588 csidphy grf syscon arm64: dts: rockchip: Add rk3528 CPU frequency scaling support arm64: dts: rockchip: enable HDMI Receiver on NanoPC T6 Link: https://lore.kernel.org/r/2079092.kXSN5OTJKJ@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
One new board the ROC-RK3588-RT, gpu improvements for RK3328, frequency
scaling for the RK3528 and the very first small steps for camera
support on the RK3588 - with the CSI-DPHY support, with more hopefully
to come soon'ish :-) .

And apart from those bigger points, some more individual peripheral work
on some boards.

* tag 'v6.18-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
  dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
  arm64: dts: rockchip: update pinctrl names for Radxa E52C
  arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
  arm64: dts: rockchip: Add USB and charger to Gameforce Ace
  arm64: dts: rockchip: enable the Mali GPU on RK3328 boards
  arm64: dts: rockchip: add GPU powerdomain, opps, and cooling to rk3328
  arm64: dts: rockchip: Fix network on rk3576 evb1 board
  arm64: dts: rockchip: add mipi csi-2 dphy nodes to rk3588
  dt-bindings: soc: rockchip: add rk3588 csidphy grf syscon
  arm64: dts: rockchip: Add rk3528 CPU frequency scaling support
  arm64: dts: rockchip: enable HDMI Receiver on NanoPC T6

Link: https://lore.kernel.org/r/2079092.kXSN5OTJKJ@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>