Introduce new st,stm32mp25-rtc compatible. It is based on st,stm32mp1-rtc.

Difference is that stm32mp25 soc implements a triple protection on RTC
registers:
- Secure bit based protection
- Privileged context based protection
- Compartment ID filtering based protection
This driver will now check theses configurations before probing to avoid
exceptions and fake reads on register.

Link: https://www.st.com/resource/en/reference_manual/rm0457-stm32mp25xx-advanced-armbased-3264bit-mpus-stmicroelectronics.pdf#page=4081
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240708153434.416287-2-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Convert dt-binding doc "rtc-fsl-ftm-alarm.txt" to yaml format.

Change example's reg to 32bit address and length.
Remove unrelated rcpm@1e34040 in example.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240528184359.2685109-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Pull RTC updates from Alexandre Belloni:
 "There is one new driver and then most of the changes are the device
  tree bindings conversions to yaml.

  New driver:
   - Epson RX8111

  Drivers:
   - Many Device Tree bindings conversions to dtschema
   - pcf8563: wakeup-source support"

* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  pcf8563: add wakeup-source support
  rtc: rx8111: handle VLOW flag
  rtc: rx8111: demote warnings to debug level
  rtc: rx6110: Constify struct regmap_config
  dt-bindings: rtc: convert trivial devices into dtschema
  dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
  dt-bindings: rtc: pxa-rtc: convert to dtschema
  rtc: Add driver for Epson RX8111
  dt-bindings: rtc: Add Epson RX8111
  rtc: mcp795: drop unneeded MODULE_ALIAS
  rtc: nuvoton: Modify part number value
  rtc: test: Split rtc unit test into slow and normal speed test
  dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
  dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
  dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
  dt-bindings: rtc: armada-380-rtc: convert to dtschema
  rtc: cros-ec: provide ID table for avoiding fallback match

Convert subdevices with just an interrupt and compatbile to
json-schema and wire up already converted subdevices.
RTC is available in all variants, so allow it unconditionally.
GPADC binding for TWL603X uses two different compatibles, so
specify just the compatible and do not include it.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240401081831.456828-1-andreas@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>

These RTCs meet the requirements for a direct conversion into
trivial-rtc:

- google,goldfish-rtc
- maxim,ds1742
- lpc32xx-rtc
- orion-rtc
- rtc-aspeed
- spear-rtc
- via,vt8500-rtc

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240413-rtc_dtschema-v3-2-eff368bcc471@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Convert existing binding to dtschema to support validation and
add the undocumented compatible 'fsl,imx23-rtc'.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240413-rtc_dtschema-v3-4-eff368bcc471@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Convert existing binding to dtschema to support validation.

The missing 'reg' and 'interrupts' properties have been added, taking
the 2 supported interrupts into account to fix the example.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240413-rtc_dtschema-v3-3-eff368bcc471@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Epson RX8111 is an RTC with timestamp functionality. Add devicetree
bindings requiring the compatible string and I2C slave address (reg)
through `trivial-rtc.yaml`.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/4823f303ec8308762430f4f3aaa462be20baef54.1700491765.git.waqar.hameed@axis.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Convert existing binding to dtschema to support validation.

This is a direct conversion with no additions.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240326-rtc-yaml-v3-4-caa430ecace7@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Convert existing binding to dtschema to support validation.

This device meets the requirements to be moved to trivial-rtc
(compatible, reg and a single interrupt).

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240326-rtc-yaml-v3-3-caa430ecace7@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>