linux-stable.git/Documentation/devicetree/bindings/rtc, branch v4.9

dt/bindings: Add bindings for Micro Crystal rv8803

2016-10-12T11:24:34+00:00

... and Epson RX8900 real time clock

Signed-off-by: Oleksij Rempel 
Acked-by: Rob Herring 
Signed-off-by: Alexandre Belloni

rtc: omap: Support ext_wakeup configuration

2016-09-21T19:46:04+00:00

Support configuration of ext_wakeup sources. This patch makes it
possible to enable ext_wakeup and set it's polarity, depending on board
configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to
notify about power-button presses. Handling power-button presses enables
to recover from RTC-only power states correctly.

Signed-off-by: Marcin Niestroj 
Acked-by: Tony Lindgren 
Acked-by: Rob Herring 
Signed-off-by: Alexandre Belloni

rtc: ds1390: Fix the SPI chip select number

2016-08-31T16:21:34+00:00

The number after the '@' symbol should be the SPI chip select
number associated with the ds1390 and it should match the 'reg'
field.

So change it the address to zero, to make it consistent.

Signed-off-by: Fabio Estevam 
Signed-off-by: Alexandre Belloni

powerpc: Various typo fixes

2016-06-14T03:58:26+00:00

Signed-off-by: Andrea Gelmini 
Signed-off-by: Michael Ellerman

Merge tag 'rtc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2016-05-21T17:42:11+00:00

Pull RTC updates from Alexandre Belloni:
 "Subsystem wide cleanups:
   - Use IS_ENABLED() instead of checking for built-in or module
   - remove useless DRV_VERSION
   - remove CLK_IS_ROOT
   - remove UIE signaling

  Drivers:
   - ds1302: rewritten to be a proper SPI device driver
   - m41t80: huge cleanup, alarm, wakelarm ans oscialltor failure
     detection support
   - rv3029: switch to regmap to handle rv3049, alarm support, fixes
   - zynqmp: enable switching to battery power, fixes
   - small fixes for at91sam9, da9053, ds1307, ds1685, ds3232, r2025,
     sa1100, snvs, stmp3xxx, tps6586x"

* tag 'rtc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits)
  rtc: tps6586x: rename so module can be autoloaded
  rtc: rv3029: hide unused i2c device table
  rtc: rs5c372: r2025: fix check for 'oscillator halted' condition
  rtc: rv3029: add alarm IRQ
  rtc: rv3029: fix set_time function
  rtc: rv3029: fix alarm support
  rtc: rv3029: Remove some checks and warnings
  rtc: rv3029: Add support of RV3049
  rtc: rv3029: convert to use regmap
  rtc: rv3029: remove 'i2c' in functions names
  rtc: stmp3xxx: print message on error
  rtc: Use IS_ENABLED() instead of checking for built-in or module
  rtc: ds3232: fix call trace when rtc->ops_lock is used as NULL
  rtc: snvs: return error in case enable_irq_wake fails
  rtc: zynqmp: Update seconds time programming logic
  rtc: sa1100: DT spelling s/interrupt-name/interrupt-names/
  rtc: mc13xxx: remove UIE signaling
  rtc: mxc: remove UIE signaling
  rtc: ds1307: Remove CLK_IS_ROOT
  rtc: hym8563: Remove CLK_IS_ROOT
  ...

Merge tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2016-05-20T21:51:34+00:00

Pull devicetree updates from Rob Herring:

- Rewrite of the unflattening code to avoid recursion and lessen the
stack usage.

- Rewrite of the phandle args parsing code to get rid of the fixed args
size. This is needed for IOMMU code.

- Sync to latest dtc which adds more dts style checking. These
warnings are enabled with "W=1" compiles.

- Tegra documentation updates related to the above warnings.

- A bunch of spelling and other doc fixes.

- Various vendor prefix additions.

* tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (52 commits)
devicetree: Add Creative Technology vendor id
gpio: dt-bindings: add ibm,ppc4xx-gpio binding
of/unittest: Remove unnecessary module.h header inclusion
drivers/of: Fix build warning in populate_node()
drivers/of: Fix depth when unflattening devicetree
of: dynamic: changeset prop-update revert fix
drivers/of: Export of_detach_node()
drivers/of: Return allocated memory from of_fdt_unflatten_tree()
drivers/of: Specify parent node in of_fdt_unflatten_tree()
drivers/of: Rename unflatten_dt_node()
drivers/of: Avoid recursively calling unflatten_dt_node()
drivers/of: Split unflatten_dt_node()
of: include errno.h in of_graph.h
of: document refcount incrementation of of_get_cpu_node()
Documentation: dt: soc: fix spelling mistakes
Documentation: dt: power: fix spelling mistake
Documentation: dt: pinctrl: fix spelling mistake
Documentation: dt: opp: fix spelling mistake
Documentation: dt: net: fix spelling mistakes
Documentation: dt: mtd: fix spelling mistake
...

rtc: sa1100: DT spelling s/interrupt-name/interrupt-names/

2016-05-20T10:33:51+00:00

Fix typo in interrupt-names

Signed-off-by: Geert Uytterhoeven 
Acked-by: Rob Herring 
Signed-off-by: Alexandre Belloni

rtc: ds1302: rewrite using SPI

2016-05-20T10:33:51+00:00

DS1302 is an half-duplex SPI device. The driver respects this fact now.
Pin configurations should be implemented using SPI subsystem.

Signed-off-by: Sergei Ianovich 
Acked-by: Rob Herring 
Signed-off-by: Alexandre Belloni

Documentation: bindings: fix palmas-rtc documentation

2016-04-25T13:38:45+00:00

change 100mA -> 100uA

Signed-off-by: H. Nikolaus Schaller 
Signed-off-by: Rob Herring

rtc: s3c: Document in binding that only s3c6410 needs a src clk

2016-03-28T22:17:31+00:00

The S3C binding doc says that the RTC and RTC source clocks are required
but the S3C driver supports different HW IP and only the s3c6410 needs a
source clock.

Fix the binding explaining that the source clock is only needed for the
s3c6410-rtc compatible controller.

Reported-by: Krzysztof Kozlowski 
Signed-off-by: Javier Martinez Canillas 
Acked-by: Alexandre Belloni 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Alexandre Belloni