linux-stable.git/Documentation/devicetree/bindings/rtc, branch v3.18.76

Documentation: dt-bindings: trickle charger dt binding document for ds1339

2014-10-14T00:18:18+00:00

Some DS13XX devices have "trickle chargers".  Introduce a device tree
binding for the resistor and diode configuration for enabling trickle
charger.

Signed-off-by: Matti Vaittinen 
Acked-by: Jason Cooper 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Guenter Roeck 
Cc: Alessandro Zummo 
Cc: Mark Rutland 
Cc: Pavel Machek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: s3c: add support for RTC of Exynos3250 SoC

2014-10-14T00:18:17+00:00

Add support for RTC of Exynos3250 SoC.  The Exynos3250 needs source
clock(32.768KHz) for RTC block.  If source clock of RTC is registerd on
clock list of common clk framework, Exynos RTC drvier have to control
this clock.

Clock list for s3c-rtc device:
- rtc : CLK_RTC of CLK_GATE_IP_PERIR is gate clock for RTC.
- rtc_src : XrtcXTI is 32.768.kHz source clock for RTC.
 (XRTCXTI: Specifies a clock from 32.768 kHz crystal pad with XRTCXTI and
 XRTCXTO pins. RTC uses this clock as the source of a real-time clock.)

Signed-off-by: Chanwoo Choi 
Acked-by: Kyungmin Park 
Cc: Alessandro Zummo 
Cc: Kukjin Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: s3c: remove warning message when checking coding style with checkpatch script

2014-10-14T00:18:17+00:00

Remove warning message when checking codeing style with checkpatch script
and reduce un-necessary i2c read operation on s3c_rtc_enable.

    WARNING: line over 80 characters
    #406: FILE: drivers/rtc/rtc-s3c.c:406:
    +		if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0) {

    WARNING: line over 80 characters
    #414: FILE: drivers/rtc/rtc-s3c.c:414:
    +		if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)) {

    WARNING: line over 80 characters
    #422: FILE: drivers/rtc/rtc-s3c.c:422:
    +		if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)) {

    WARNING: Missing a blank line after declarations
    #451: FILE: drivers/rtc/rtc-s3c.c:451:
    +	struct s3c_rtc_drv_data *data;
    +	if (pdev->dev.of_node) {

    WARNING: Missing a blank line after declarations
    #453: FILE: drivers/rtc/rtc-s3c.c:453:
    +		const struct of_device_id *match;
    +		match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node);

    WARNING: DT compatible string "samsung,s3c2416-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/
    #650: FILE: drivers/rtc/rtc-s3c.c:650:
    +		.compatible = "samsung,s3c2416-rtc",

    WARNING: DT compatible string "samsung,s3c2443-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/
    #653: FILE: drivers/rtc/rtc-s3c.c:653:
    +		.compatible = "samsung,s3c2443-rtc",

Signed-off-by: Chanwoo Choi 
Acked-by: Kyungmin Park 
Cc: Alessandro Zummo 
Cc: Kukjin Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: sun6i: Add sun6i RTC driver

2014-09-19T10:39:19+00:00

This patch introduces the driver for the RTC in the Allwinner A31 and
A23 SoCs.

Unlike the RTC found in A10/A20 SoCs, which was part of the timer, the
RTC in A31/A23 are a separate hardware block, which also contain a few
controls for the RTC block hardware (a regulator and RTC block GPIO pin
latches), while also having separate interrupts for the alarms.

The hardware is different enough to make a different driver for it.

Signed-off-by: Chen-Yu Tsai 
Reviewed-by: Varka Bhadram 
Signed-off-by: Maxime Ripard

drivers/rtc/rtc-hym8563.c: add optional clock-output-names property

2014-06-06T23:08:08+00:00

This enables the setting of a custom clock name for the clock provided by
the hym8563 rtc.

Signed-off-by: Heiko Stuebner 
Reviewed-by: Mike Turquette 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Documentation/devicetree/bindings: add documentation for the APM X-Gene SoC RTC DTS binding

2014-06-06T23:08:06+00:00

Signed-off-by: Rameshwar Prasad Sahu 
Signed-off-by: Loc Ho 
Cc: Jon Masters 
Cc: Alessandro Zummo 
Cc: Catalin Marinas 
Cc: Will Deacon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: sunxi: change compatibles

2014-04-03T23:21:21+00:00

The Allwinner A10 compatibles were following a slightly different
compatible patterns than the rest of the SoCs for historical reasons.
Change the compatibles to match the other pattern in the RTC driver for
consistency.

Signed-off-by: Maxime Ripard 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'akpm' (incoming from Andrew)

2014-01-24T03:11:50+00:00

Merge second patch-bomb from Andrew Morton:
 - various misc bits
 - the rest of MM
 - add generic fixmap.h, use it
 - backlight updates
 - dynamic_debug updates
 - printk() updates
 - checkpatch updates
 - binfmt_elf
 - ramfs
 - init/
 - autofs4
 - drivers/rtc
 - nilfs
 - hfsplus
 - Documentation/
 - coredump
 - procfs
 - fork
 - exec
 - kexec
 - kdump
 - partitions
 - rapidio
 - rbtree
 - userns
 - memstick
 - w1
 - decompressors

* emailed patches from Andrew Morton : (197 commits)
  lib/decompress_unlz4.c: always set an error return code on failures
  romfs: fix returm err while getting inode in fill_super
  drivers/w1/masters/w1-gpio.c: add strong pullup emulation
  drivers/memstick/host/rtsx_pci_ms.c: fix ms card data transfer bug
  userns: relax the posix_acl_valid() checks
  arch/sh/kernel/dwarf.c: use rbtree postorder iteration helper instead of solution using repeated rb_erase()
  fs-ext3-use-rbtree-postorder-iteration-helper-instead-of-opencoding-fix
  fs/ext3: use rbtree postorder iteration helper instead of opencoding
  fs/jffs2: use rbtree postorder iteration helper instead of opencoding
  fs/ext4: use rbtree postorder iteration helper instead of opencoding
  fs/ubifs: use rbtree postorder iteration helper instead of opencoding
  net/netfilter/ipset/ip_set_hash_netiface.c: use rbtree postorder iteration instead of opencoding
  rbtree/test: test rbtree_postorder_for_each_entry_safe()
  rbtree/test: move rb_node to the middle of the test struct
  rapidio: add modular rapidio core build into powerpc and mips branches
  partitions/efi: complete documentation of gpt kernel param purpose
  kdump: add /sys/kernel/vmcoreinfo ABI documentation
  kdump: fix exported size of vmcoreinfo note
  kexec: add sysctl to disable kexec_load
  fs/exec.c: call arch_pick_mmap_layout() only once
  ...

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-01-24T02:49:36+00:00

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.

  The largest part of this is a conversion of device registration for
  some renesas shmobile/sh devices over to use resources.  This has
  required coordination with the corresponding arch/sh changes, and
  we've agreed to merge the arch/sh changes through our tree.

  Added in this branch is support for Trusted Foundations secure
  firmware, which is what is used on many of the commercial Nvidia Tegra
  products that are in the market, including the Nvidia Shield.  The
  code is local to arch/arm at this time since it's uncertain whether it
  will be shared with arm64 longer-term, if needed we will refactor
  later.

  A couple of new RTC drivers used on ARM boards, merged through our
  tree on request by the RTC maintainer.

  ... plus a bunch of smaller updates across the board, gpio conversions
  for davinci, etc"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  watchdog: davinci: rename platform driver to davinci-wdt
  tty: serial: Limit msm_serial_hs driver to platforms that use it
  mmc: msm_sdcc: Limit driver to platforms that use it
  usb: phy: msm: Move mach dependent code to platform data
  clk: versatile: fixup IM-PD1 clock implementation
  clk: versatile: pass a name to ICST clock provider
  ARM: integrator: pass parent IRQ to the SIC
  irqchip: versatile FPGA: support cascaded interrupts from DT
  gpio: davinci: don't create irq_domain in case of unbanked irqs
  gpio: davinci: use chained_irq_enter/chained_irq_exit API
  gpio: davinci: add OF support
  gpio: davinci: remove unused variable intc_irq_num
  gpio: davinci: convert to use irqdomain support.
  gpio: introduce GPIO_DAVINCI kconfig option
  gpio: davinci: get rid of DAVINCI_N_GPIO
  gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
  serial: sh-sci: Add OF support
  serial: sh-sci: Add device tree bindings documentation
  serial: sh-sci: Remove platform data mapbase and irqs fields
  serial: sh-sci: Remove platform data scbrr_algo_id field
  ...

dt-bindings: add hym8563 binding

2014-01-24T00:36:59+00:00

Add binding documentation for the hym8563 rtc chip.

Signed-off-by: Heiko Stuebner 
Cc: Rob Herring 
Cc: Pawel Moll 
Cc: Mark Rutland 
Cc: Stephen Warren 
Cc: Ian Campbell 
Cc: Grant Likely 
Cc: Mike Turquette 
Cc: Richard Weinberger 
Cc: Mark Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds