[ Upstream commit 73852e56827f5cb5db9d6e8dd8191fc2f2e8f424 ]

The abracon,tc-resistor property value is in kOhm.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Pull RTC updates from Alexandre Belloni:
 "It is now possible to add custom sysfs attributes while avoiding a
  possible race condition. Unused code has been removed resulting in a
  nice reduction of the code base. And more drivers have been switched
  to SPDX by their maintainers.

 Summary:

  Subsystem:
   - new helpers to add custom sysfs attributes
   - struct rtc_task removal along with rtc_irq_[un]register()
   - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore

  Drivers:
   - armada38x: reset after rtc power loss
   - ds1307: now supports m41t11
   - isl1208: now supports isl1219 and tamper detection
   - pcf2127: internal SRAM support"

* tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
  rtc: ds1307: simplify hwmon config
  rtc: s5m: Add SPDX license identifier
  rtc: maxim: Add SPDX license identifiers
  rtc: isl1219: add device tree documentation
  rtc: isl1208: set ev-evienb bit from device tree
  rtc: isl1208: Add "evdet" interrupt source for isl1219
  rtc: isl1208: add support for isl1219 with tamper detection
  rtc: sysfs: facilitate attribute add to rtc device
  rtc: remove struct rtc_task
  char: rtc: remove task handling
  rtc: pcf85063: preserve control register value between stop and start
  rtc: sh: remove unused variable rtc_dev
  rtc: unexport rtc_irq_set_*
  rtc: simplify rtc_irq_set_state/rtc_irq_set_freq
  rtc: remove irq_task and irq_task_lock
  rtc: remove rtc_irq_register/rtc_irq_unregister
  rtc: sh: remove dead code
  rtc: sa1100: don't set PIE frequency
  rtc: ds1307: support m41t11 variant
  rtc: ds1307: fix data pointer to m41t0
  ...

The devicetree documentation for the ISL1219 device tree
binding is added with a short example. It is not a trivial
device, because it supports two interrupt sources.

Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

'interrupt-parent' is often documented as part of define bindings, but
it is really outside the scope of a device binding. It's never required
in a given node as it is often inherited from a parent node. Or it can
be implicit if a parent node is an 'interrupt-controller' node. So
remove it from all the binding files.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

The m41t11 variant is very similar to the already supported m41t00 and
m41t0, but it has also 56 bytes of NVRAM.

Add it to driver taking into account NVRAM section.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

RTC embedded in stm32mp1 SoC is slightly different from stm32h7 one, it
doesn't require to disable backup domain write protection, and rtc_ck
parent clock assignment isn't allowed.
To sum up, stm32mp1 RTC requires 2 clocks, pclk and rtc_ck, and an RTC
alarm interrupt.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

According to Devicetree Specification v0.2 document:

"The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model."

Do as suggested in the binding example.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

RTC driver should not be aware of the PWR registers offset and bits
position. Furthermore, we can imagine that Disable Backup Protection (DBP)
relative register and bit mask could change depending on the SoC. So this
patch moves st,syscfg property from single pwrcfg phandle to pwrcfg
phandle/offset/mask triplet.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The ISL12026 is a combination RTC and EEPROM device with I2C
interface.  The standard RTC driver interface is provided.  The EEPROM
is accessed via the NVMEM interface.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Document the binding for i.MX53 SRTC implemented by rtc-mxc_v2

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>