Pull phy updates from Vinod Koul: "New support: - UFS PHY for Qualcomm SA8775p, SM7150 - PCIe 2 lane phy support for sc8180x and PCIe PHY for SDX65 - Mediatke hdmi phy support for mt8195 - rockchip naneng combo phy support for RK358 Updates: - Drop Thunder Bay eMMC PHY driver - RC support for PCIe phy for Qualcomm SDX55 - SGMII support in WIZ driver for J721E - PCIe and multilink SGMII PHY support in cadence driver - Big pile of platform remove callback returning void conversions" * tag 'phy-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits) phy: cadence: cdns-dphy-rx: Add common module reset support phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E dt-bindings: phy: ti: phy-gmii-sel: Add support for J784S4 CPSW9G phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select() phy: cadence: Sierra: Add PCIe + SGMII PHY multilink configuration phy: mediatek: add support for phy-mtk-hdmi-mt8195 phy: phy-mtk-hdmi: Add generic phy configure callback dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port dt-bindings: phy: ti,phy-j721e-wiz: document clock-output-names dt-bindings: phy: ti,phy-j721e-wiz: drop assigned-clocks dt-bindings: phy: ti,phy-am654-serdes: drop assigned-clocks type dt-bindings: phy: cadence-torrent: drop assigned-clocks dt-bindings: phy: cadence-sierra: drop assigned-clocks phy: rockchip: remove unused hw_to_inno function phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes phy: qcom-qmp-ufs: Add SM7150 support ...
The CPSW9G instance of CPSW Ethernet Switch on TI's J784S4 SoC supports additional PHY modes like QSGMII. Add a compatible for it. Enable the use of "ti,qsgmii-main-ports" property for J784S4 CPSW9G. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230315092408.1722114-1-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a compatible for the HDMI PHY on MT8195 Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Link: https://lore.kernel.org/r/20220919-v8-1-a84c80468fe9@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the clock-output-names property of clock children, even though the nodes are actually deprecated, to fix dtbs_check warnings like: k3-j7200-common-proc-board.dtb: wiz@5060000: refclk-dig: 'clock-output-names' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230404190115.546973-5-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
The meta schema from DT schema already defines assigned-clocks, so there is no need for device schema to mention it at all. There are also no benefits of having it here and a board could actually need more of clock assignments than the schema allows. Keep however the assigned-clocks in children nodes, as apparently their proper parenting is required. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230404190115.546973-4-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
The meta schema from DT schema already defines assigned-clocks, so there is no need for device schema to mention it at all. The specific parenting of the first input and output clock is apparently important, thus keep them as required, but without defining type. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230404190115.546973-3-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
The meta schema from DT schema already defines assigned-clocks, so there is no need for device schema to mention it at all. There are also no benefits of having it here and a board could actually need more of clock assignments than the schema allows. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230404190115.546973-2-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
The meta schema from DT schema already defines assigned-clocks, so there is no need for device schema to mention it at all. There are also no benefits of having it here and a board could actually need more of clock assignments than the schema allows. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230404190115.546973-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a new compatible for the QMP UFS PHY found on sa8775p platforms and update the clocks property to accommodate three clocks. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230411130446.401440-3-brgl@bgdev.pl Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the QMP UFS PHY compatible for SM7150. Signed-off-by: David Wronek <davidwronek@gmail.com> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230311231733.141806-2-danila@jiaxyga.com Signed-off-by: Vinod Koul <vkoul@kernel.org>