linux-stable.git/Documentation/devicetree/bindings/phy, branch v5.0 Linux kernel stable tree dt-bindings: phy-qcom-qmp: Move #clock-cells to child 2018-12-12T04:32:12+00:00 Evan Green evgreen@chromium.org 2018-12-10T19:32:04+00:00 d21aafe9a4a55ae5efcd640c0f3dc64ac047d38e The phy-qcom-qmp bindings specified #clock-cells as 1. This was never used because of_clk_add_provider() was never called, so there was no way anybody could reference these clocks from DT. Furthermore, even if they could be accessed, the bindings never specified what should go in that additional cell. Fix these incomplete and broken bindings. Move the #clock-cells into the child node, since that is the actual clock provider, and not all instances of qcom-qmp-phy are clock providers. Also set #clock-cells to zero, since there's nothing to pass to it. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
The phy-qcom-qmp bindings specified #clock-cells as 1. This was never used
because of_clk_add_provider() was never called, so there was no way anybody
could reference these clocks from DT. Furthermore, even if they could be
accessed, the bindings never specified what should go in that additional
cell.

Fix these incomplete and broken bindings. Move the #clock-cells into the
child node, since that is the actual clock provider, and not all
instances of qcom-qmp-phy are clock providers. Also set #clock-cells to
zero, since there's nothing to pass to it.

Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
dt-bindings: phy-qcom-qmp: Fix register underspecification 2018-12-12T04:32:10+00:00 Evan Green evgreen@chromium.org 2018-12-10T19:28:22+00:00 2517d09b39f3bb811e7349efa8248147ccb2eaa1 Add register regions for the second lane of dual-lane nodes. This additional specification is needed so that the driver can stop reaching beyond the tx and rx register allocations to get at the second lane registers in a dual-lane PHY. While in there, document #clock-cells as optional for PHYs that don't provide a pipe clock. Also, document the pcs_misc register region, which was being quietly supplied and used. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
Add register regions for the second lane of dual-lane nodes.
This additional specification is needed so that the driver can stop
reaching beyond the tx and rx register allocations to get at the
second lane registers in a dual-lane PHY.

While in there, document #clock-cells as optional for PHYs that don't
provide a pipe clock. Also, document the pcs_misc register region, which
was being quietly supplied and used.

Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
dt-bindings: phy: add binding for Freescale i.MX8MQ USB3 PHY 2018-12-12T04:31:45+00:00 Lucas Stach l.stach@pengutronix.de 2018-11-15T14:12:46+00:00 3c2ce40b2fbb52b5e861f8664f5422d39f11b39e This adds the binding for the USB3 PHY found on the i.MX8M SoC. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
This adds the binding for the USB3 PHY found on the i.MX8M SoC.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
dt-bindings: phy: add cpsw port interface mode selection phy bindings 2018-12-12T04:31:40+00:00 Grygorii Strashko grygorii.strashko@ti.com 2018-11-26T00:15:22+00:00 5b9bf512ca93a46d370215966d21208ca2e7dc64 Add CPSW Port's Interface Mode Selection PHY (phy-gmii-sel) DT Bindings Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
Add CPSW Port's Interface Mode Selection PHY (phy-gmii-sel) DT Bindings

Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
dt-bindings: phy: Document cadence Sierra PHY bindings 2018-12-12T04:31:38+00:00 Alan Douglas adouglas@cadence.com 2018-11-12T16:42:01+00:00 cb96a690724e105f149b27a88d66669c53b01625 Add DT binding documentation for Sierra PHY. The PHY supports a number of different protocols, including PCIe and USB. The PHY lanes may be configured as single or multi-lane links. Each link is treated as a separate sub-node. For example, if there are 4 lanes in total the first 2 might be configured as a multi-lane PCIe link while the other two are single lane USB links, and in this case there would be 3 sub-nodes. There are two resets for the PHY block (one for APB register access, one for the PHY link) and separate resets for each link. For multi-lane links, the reset corresponds to the reset line on the master lane, the resets on other lanes have no effect. Signed-off-by: Alan Douglas <adouglas@cadence.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
Add DT binding documentation for Sierra PHY.  The PHY supports
a number of different protocols, including PCIe and USB.

The PHY lanes may be configured as single or multi-lane links.
Each link is treated as a separate sub-node.  For example, if
there are 4 lanes in total the first 2 might be configured as
a multi-lane PCIe link while the other two are single lane
USB links, and in this case there would be 3 sub-nodes.

There are two resets for the PHY block (one for APB register
access, one for the PHY link) and separate resets for each
link.  For multi-lane links, the reset corresponds to the
reset line on the master lane, the resets on other lanes
have no effect.

Signed-off-by: Alan Douglas <adouglas@cadence.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
dt-bindings: phy: add binding for Allwinner H6 USB2 PHY 2018-12-12T04:31:27+00:00 Icenowy Zheng icenowy@aosc.io 2018-10-04T12:28:46+00:00 1726ea907a7f52d66560ccdb7d0c4da8a6094c14 The USB2.0 PHY on Allwinner H6 is similar to the ones on the ones on older SoCs, but with holes in PHY number (USB1 and USB2 are missing, in which USB1 is a USB3 PHY). Add binding for the PHY. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
The USB2.0 PHY on Allwinner H6 is similar to the ones on the ones on
older SoCs, but with holes in PHY number (USB1 and USB2 are missing, in
which USB1 is a USB3 PHY).

Add binding for the PHY.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
dt-bindings: phy-qcom-qmp: Fix several mistakes from prior commits 2018-11-12T10:49:06+00:00 Douglas Anderson dianders@chromium.org 2018-10-12T21:36:32+00:00 7243ec72b9024b1ae98ed571db559a7cf0c5a0f4 Digging through the "phy-qcom-qmp" showed me many inconsistencies between the bindings and the reality of the driver. Let's fix them all. * In commit 2d66eab18375 ("dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074") we probably should have explicitly listed that there are no clocks for this PHY and also added the reset names in alphabetical order. You can see that there are no clocks in the driver where "clk_list" is NULL. * In commit 8587b220f05e ("dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY") we probably should have listed the resets for this new PHY and also removed the "(Optional)" marking for the "cfg" reset since PHYs that need "cfg" really do need it. It's just that not all PHYs need it. * In commit 7f0802074120 ("dt-bindings: phy-qcom-qmp: Update bindings for sdm845") we forgot to update one instance of the string "qcom,qmp-v3-usb3-phy" to be "qcom,sdm845-qmp-usb3-phy". Let's fix that. We should also have added "qcom,sdm845-qmp-usb3-uni-phy" to the clock-names and reset-names lists. * In commit 99c7c7364b71 ("dt-bindings: phy-qcom-qmp: Add UFS phy compatible string for sdm845") we should have added the set of clocks and resets for "qcom,sdm845-qmp-ufs-phy". These were taken from the driver. * Cleanup the wording for what properties child nodes have to make it more obvious which types of PHYs need clocks and resets. This was sorta implicit in the "-names" description but I found myself confused. * As per the code not all "pcie qmp phys" have resets. Specifically note that the "has_lane_rst" property in the driver is false for "ipq8074-qmp-pcie-phy". Thus make it clear exactly which PHYs need child nodes with resets. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> 
Digging through the "phy-qcom-qmp" showed me many inconsistencies
between the bindings and the reality of the driver.  Let's fix them
all.

* In commit 2d66eab18375 ("dt-bindings: phy: qmp: Add support for QMP
  phy in IPQ8074") we probably should have explicitly listed that
  there are no clocks for this PHY and also added the reset names in
  alphabetical order.  You can see that there are no clocks in the
  driver where "clk_list" is NULL.

* In commit 8587b220f05e ("dt-bindings: phy-qcom-qmp: Update bindings
  for QMP V3 USB PHY") we probably should have listed the resets for
  this new PHY and also removed the "(Optional)" marking for the "cfg"
  reset since PHYs that need "cfg" really do need it.  It's just that
  not all PHYs need it.

* In commit 7f0802074120 ("dt-bindings: phy-qcom-qmp: Update bindings
  for sdm845") we forgot to update one instance of the string
  "qcom,qmp-v3-usb3-phy" to be "qcom,sdm845-qmp-usb3-phy".  Let's fix
  that.  We should also have added "qcom,sdm845-qmp-usb3-uni-phy" to
  the clock-names and reset-names lists.

* In commit 99c7c7364b71 ("dt-bindings: phy-qcom-qmp: Add UFS phy
  compatible string for sdm845") we should have added the set of
  clocks and resets for "qcom,sdm845-qmp-ufs-phy".  These were taken
  from the driver.

* Cleanup the wording for what properties child nodes have to make it
  more obvious which types of PHYs need clocks and resets.  This was
  sorta implicit in the "-names" description but I found myself
  confused.

* As per the code not all "pcie qmp phys" have resets.  Specifically
  note that the "has_lane_rst" property in the driver is false for
  "ipq8074-qmp-pcie-phy".  Thus make it clear exactly which PHYs need
  child nodes with resets.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2018-10-26T19:09:58+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-10-26T19:09:58+00:00 b27186abb37b7bd19e0ca434f4f425c807dbd708 Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ... 
Pull Devicetree updates from Rob Herring:
 "A bit bigger than normal as I've been busy this cycle.

  There's a few things with dependencies and a few things subsystem
  maintainers didn't pick up, so I'm taking them thru my tree.

  The fixes from Johan didn't get into linux-next, but they've been
  waiting for some time now and they are what's left of what subsystem
  maintainers didn't pick up.

  Summary:

   - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4

   - Work to get rid of direct accesses to struct device_node name and
     type pointers in preparation for removing them. New helpers for
     parsing DT cpu nodes and conversions to use the helpers. printk
     conversions to %pOFn for printing DT node names. Most went thru
     subystem trees, so this is the remainder.

   - Fixes to DT child node lookups to actually be restricted to child
     nodes instead of treewide.

   - Refactoring of dtb targets out of arch code. This makes the support
     more uniform and enables building all dtbs on c6x, microblaze, and
     powerpc.

   - Various DT binding updates for Renesas r8a7744 SoC

   - Vendor prefixes for Facebook, OLPC

   - Restructuring of some ARM binding docs moving some peripheral
     bindings out of board/SoC binding files

   - New "secure-chosen" binding for secure world settings on ARM

   - Dual licensing of 2 DT IRQ binding headers"

* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
  ARM: dt: relicense two DT binding IRQ headers
  power: supply: twl4030-charger: fix OF sibling-node lookup
  NFC: nfcmrvl_uart: fix OF child-node lookup
  net: stmmac: dwmac-sun8i: fix OF child-node lookup
  net: bcmgenet: fix OF child-node lookup
  drm/msm: fix OF child-node lookup
  drm/mediatek: fix OF sibling-node lookup
  of: Add missing exports of node name compare functions
  dt-bindings: Add OLPC vendor prefix
  dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
  dt-bindings: thermal: samsung: Add SPDX license identifier
  dt-bindings: clock: samsung: Add SPDX license identifiers
  dt-bindings: timer: ostm: Add R7S9210 support
  dt-bindings: phy: rcar-gen2: Add r8a7744 support
  dt-bindings: can: rcar_can: Add r8a7744 support
  dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
  dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  dt-bindings: thermal: rcar: Add device tree support for r8a7744
  Documentation: dt: Add binding for /secure-chosen/stdout-path
  dt-bindings: arm: zte: Move sysctrl bindings to their own doc
  ...
Merge tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2018-10-26T15:14:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-10-26T15:14:13+00:00 9703fc8caf36ac65dca1538b23dd137de0b53233 Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ... 
Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver patches for 4.20-rc1

  Lots of USB changes in here, primarily in these areas:

   - typec updates and new drivers

   - new PHY drivers

   - dwc2 driver updates and additions (this old core keeps getting
     added to new devices.)

   - usbtmc major update based on the industry group coming together and
     working to add new features and performance to the driver.

   - USB gadget additions for new features

   - USB gadget configfs updates

   - chipidea driver updates

   - other USB gadget updates

   - USB serial driver updates

   - renesas driver updates

   - xhci driver updates

   - other tiny USB driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits)
  usb: phy: ab8500: silence some uninitialized variable warnings
  usb: xhci: tegra: Add genpd support
  usb: xhci: tegra: Power-off power-domains on removal
  usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten
  usbip: tools: fix atoi() on non-null terminated string
  USB: misc: appledisplay: fix backlight update_status return code
  phy: phy-pxa-usb: add a new driver
  usb: host: add DT bindings for faraday fotg2
  usb: host: ohci-at91: fix request of irq for optional gpio
  usb/early: remove set but not used variable 'remain_length'
  usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc
  usb: typec: tcpm: Report back negotiated PPS voltage and current
  USB: core: remove set but not used variable 'udev'
  usb: core: fix memory leak on port_dev_path allocation
  USB: net2280: Remove ->disconnect() callback from net2280_pullup()
  usb: dwc2: disable power_down on rockchip devices
  usb: gadget: udc: renesas_usb3: add support for r8a77990
  dt-bindings: usb: renesas_usb3: add bindings for r8a77990
  usb: gadget: udc: renesas_usb3: Add r8a774a1 support
  USB: serial: cypress_m8: remove set but not used variable 'iflag'
  ...
dt-bindings: phy: rcar-gen2: Add r8a7744 support 2018-10-15T18:27:05+00:00 Biju Das biju.das@bp.renesas.com 2018-09-27T12:23:34+00:00 b3da72593e14511967a5f96f5e329b022239a90e Add USB PHY support for r8a7744 SoC. Renesas RZ/G1N (R8A7744) USB PHY is identical to the R-Car Gen2 family. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rob Herring <robh@kernel.org> 
Add USB PHY support for r8a7744 SoC. Renesas RZ/G1N (R8A7744)
USB PHY is identical to the R-Car Gen2 family.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rob Herring <robh@kernel.org>