linux-stable.git/Documentation/devicetree/bindings/mtd, branch linux-3.6.y

Merge branch 'v3.5-rc7-fixes' of git://github.com/lunn/linux into fixes

2012-07-25T19:37:09+00:00

From Andrew Lunn :

* 'v3.5-rc7-fixes' of git://github.com/lunn/linux:
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Orion: fix driver probe error handling with respect to clk
  ARM: Dove: Fixup ge00 initialisation
  ARM: Kirkwood: Fix PHY disable clk problems
  ARM: Kirkwood: Ensure runit clock always ticks.

Signed-off-by: Arnd Bergmann

ARM: Kirkwood: Replace mrvl with marvell

2012-07-25T15:06:23+00:00

It has been decided to use marvell, not mrvl, in the compatibility
property. Search & replace.

Signed-off-by: Andrew Lunn

of: fix a few typos in the binding documentation

2012-07-06T12:16:14+00:00

Signed-off-by: Uwe Kleine-König 
[rob herring: drop conflicting atmel-nand.txt changes]
Signed-off-by: Rob Herring

Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd

2012-06-01T23:55:42+00:00

Pull mtd update from David Woodhouse:
 - More robust parsing especially of xattr data in JFFS2
 - Updates to mxc_nand and gpmi drivers to support new boards and device tree
 - Improve consistency of information about ECC strength in NAND devices
 - Clean up partition handling of plat_nand
 - Support NAND drivers without dedicated access to OOB area
 - BCH hardware ECC support for OMAP
 - Other fixes and cleanups, and a few new device IDs

Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.

* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
  mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
  mtd: block2mtd: fix recursive call of mtd_writev
  mtd: gpmi-nand: define ecc.strength
  mtd: of_parts: fix breakage in Kconfig
  mtd: nand: fix scan_read_raw_oob
  mtd: docg3 fix in-middle of blocks reads
  mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
  mtd: add fixup for S29NS512P NOR flash.
  jffs2: allow to complete xattr integrity check on first GC scan
  jffs2: allow to discriminate between recoverable and non-recoverable errors
  mtd: nand: omap: add support for hardware BCH ecc
  ARM: OMAP3: gpmc: add BCH ecc api and modes
  mtd: nand: check the return code of 'read_oob/read_oob_raw'
  mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
  mtd: m25p80: Add support for Winbond W25Q80BW
  jffs2: get rid of jffs2_sync_super
  jffs2: remove unnecessary GC pass on sync
  jffs2: remove unnecessary GC pass on umount
  jffs2: remove lock_super
  mtd: gpmi: add gpmi support for mx6q
  ...

mtd: Add orion_nand devicetree bindings

2012-05-15T02:29:11+00:00

Allow a NAND chip using the orion_nand driver to be described using devicetree.

Changes since last submission (V4) [Addressing comments by]:-
* WARN when bank-width is out of range [Andrew Lunn]

Changes since last submission (V3):-
* Document all parameters [Grant Likely]
* Convert bank-width to be in bytes
* Add explicit defaults for cle, ale and bank-width

Signed-off-by: Jamie Lentin 
Signed-off-by: Jason Cooper

mtd: gpmi: add device tree support to gpmi-nand

2012-05-14T04:22:19+00:00

This patch just adds the DT support to gpmi-nand.

Signed-off-by: Huang Shijie 
Signed-off-by: Huang Shijie 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: David Woodhouse

mtd: mxc_nand: implement device tree probing

2012-05-14T04:03:08+00:00

This is tested on i.MX27.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: David Woodhouse

ARM: at91/NAND DT bindings: add comments

2012-04-04T16:35:42+00:00

Add comments to NAND "gpios" property to make it clearer.

Signed-off-by: Nicolas Ferre 
Acked-by: Jean-Christophe PLAGNIOL-VILLARD

Merge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6

2012-03-31T00:31:56+00:00

Pull MTD changes from David Woodhouse:
 - Artem's cleanup of the MTD API continues apace.
 - Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst
   others.
 - More work on DiskOnChip G3, new driver for DiskOnChip G4.
 - Clean up debug/warning printks in JFFS2 to use pr_.

Fix up various trivial conflicts, largely due to changes in calling
conventions for things like dmaengine_prep_slave_sg() (new inline
wrapper to hide new parameter, clashing with rewrite of previously last
parameter that used to be an 'append' flag, and is now a bitmap of
'unsigned long flags').

(Also some header file fallout - like so many merges this merge window -
and silly conflicts with sparse fixes)

* tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits)
  mtd: docg3 add protection against concurrency
  mtd: docg3 refactor cascade floors structure
  mtd: docg3 increase write/erase timeout
  mtd: docg3 fix inbound calculations
  mtd: nand: gpmi: fix function annotations
  mtd: phram: fix section mismatch for phram_setup
  mtd: unify initialization of erase_info->fail_addr
  mtd: support ONFI multi lun NAND
  mtd: sm_ftl: fix typo in major number.
  mtd: add device-tree support to spear_smi
  mtd: spear_smi: Remove default partition information from driver
  mtd: Add device-tree support to fsmc_nand
  mtd: fix section mismatch for doc_probe_device
  mtd: nand/fsmc: Remove sparse warnings and errors
  mtd: nand/fsmc: Add DMA support
  mtd: nand/fsmc: Access the NAND device word by word whenever possible
  mtd: nand/fsmc: Use dev_err to report error scenario
  mtd: nand/fsmc: Use devm routines
  mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform
  mtd: fsmc_nand: add pm callbacks to support hibernation
  ...

mtd: Move fdt partition documentation to a seperate file

2012-03-28T23:07:30+00:00

Partitions are described in the same way for all mtd devices when using
devicetree, move the documentation to a separate file and add references
to it.

Signed-off-by: Jamie Lentin 
Acked-by: Arnd Bergmann 
Acked-by: Jason Cooper 
Signed-off-by: Grant Likely