Pull devicetree updates from Rob Herring:

 - Convert various DT (non-binding) doc files to ReST

 - Various improvements to device link code

 - Fix __of_attach_node_sysfs refcounting bug

 - Add support for 'memory-region-names' with reserved-memory binding

 - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
   Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
   Shanghai Awinic Technology Co., MikroTik, Silex Insight

 - A bunch more binding conversions to DT schema. Only 3K to go.

 - Add a minimum version check for schema tools

 - Treewide dropping of 'allOf' usage with schema references. Not needed
   in new json-schema spec.

 - Some formatting clean-ups of schemas

* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
  dt-bindings: clock: Add documentation for X1830 bindings.
  dt-bindings: mailbox: Convert imx mu to json-schema
  dt-bindings: power: Convert imx gpcv2 to json-schema
  dt-bindings: power: Convert imx gpc to json-schema
  dt-bindings: Merge gpio-usb-b-connector with usb-connector
  dt-bindings: timer: renesas: cmt: Convert to json-schema
  dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
  dt-bindings: timer: Convert i.MX GPT to json-schema
  dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
  dt-bindings: serial: Add binding for UART pin swap
  dt-bindings: geni-se: Add interconnect binding for GENI QUP
  dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
  dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
  dt-bindings: input: touchscreen: edt-ft5x06: change reg property
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  dt-bindings: timer: renesas: mtu2: Convert to json-schema
  of/fdt: Remove redundant kbasename function call
  dt-bindings: clock: Convert i.MX1 clock to json-schema
  dt-bindings: clock: Convert i.MX21 clock to json-schema
  dt-bindings: clock: Convert i.MX25 clock to json-schema
  ...

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Constify 'properties' attribute in core header file

  New Drivers:
   - Add support for Gateworks System Controller
   - Add support for MediaTek MT6358 PMIC
   - Add support for Mediatek MT6360 PMIC
   - Add support for Monolithic Power Systems MP2629 ADC and Battery charger

  Fix-ups:
   - Use new I2C API in htc-i2cpld
   - Remove superfluous code in sprd-sc27xx-spi
   - Improve error handling in stm32-timers
   - Device Tree additions/fixes in mt6397
   - Defer probe betterment in wm8994-core
   - Improve module handling in wm8994-core
   - Staticify in stpmic1
   - Trivial (spelling, formatting) in tqmx86

  Bug Fixes:
   - Fix incorrect register/PCI IDs in intel-lpss-pci
   - Fix unbalanced Regulator API calls in wm8994-core
   - Fix double free() in wcd934x
   - Remove IRQ domain on failure in stmfx
   - Reset chip on resume in stmfx
   - Disable/enable IRQs on suspend/resume in stmfx
   - Do not use bulk writes on H/W which does not support them in max77620"

* tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (29 commits)
  mfd: mt6360: Remove duplicate REGMAP_IRQ_REG_LINE() entry
  mfd: Add support for PMIC MT6360
  mfd: max77620: Use single-byte writes on MAX77620
  mfd: wcd934x: Drop kfree for memory allocated with devm_kzalloc
  mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
  mfd: stmfx: Fix stmfx_irq_init error path
  mfd: stmfx: Reset chip on resume as supply was disabled
  mfd: wm8994: Silence warning about supplies during deferred probe
  mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable()
  mfd: wm8994: Fix driver operation if loaded as modules
  dt-bindings: mfd: mediatek: Add MT6397 Pin Controller
  mfd: Constify properties in mfd_cell
  mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel()
  mfd: sprd: Remove unnecessary spi_bus_type setting
  mfd: intel-lpss: Update LPSS UART #2 PCI ID for Jasper Lake
  mfd: tqmx86: Fix a typo in MODULE_DESCRIPTION
  mfd: stpmic1: Make stpmic1_regmap_config static
  mfd: htc-i2cpld: Convert to use i2c_new_client_device()
  MAINTAINERS: Add entry for mp2629 Battery Charger driver
  power: supply: mp2629: Add impedance compensation config
  ...

Pull regulator updates from Mark Brown:
 "The big change in this release is that Matti Vaittinen has factored
  out the linear ranges support into a separate library in lib/ since it
  is also useful for at least the power subsystem (and most likely
  others too), it helps subsystems which need to map register values
  into more useful real world values do so with minimal per-driver code.

   - Factoring out of the linear ranges support into a library in lib/
     from Matti Vaittinen.

   - Trace points for bypass mode.

   - Use the consumer name in debugfs to make it easier to understand.

   - New drivers for Maxim MAX77826 and MAX8998"

* tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
  regulator: max8998: max8998_set_current_limit() can be static
  dt-bindings: regulator: Convert anatop regulator to json-schema
  regulator: core: Add regulator bypass trace points
  regulator: extract voltage balancing code to the separate function
  regulator/mfd: max8998: Document charger regulator
  regulator: max8998: Add charger regulator
  MAINTAINERS: Add maintainer entry for linear ranges helper
  regulator: bd718x7: remove voltage change restriction from BD71847 LDOs
  lib: linear_ranges: Add missing MODULE_LICENSE()
  regulator: use linear_ranges helper
  power: supply: bd70528: rename linear_range to avoid collision
  lib/test_linear_ranges: add a test for the 'linear_ranges'
  lib: add linear ranges helpers
  regulator: db8500-prcmu: Use true,false for bool variable
  regulator: bd718x7: remove voltage change restriction from BD71847
  regulator: max77826: Remove erroneous additionalProperties
  regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l
  regulator: Document bindings for max77826
  regulator: max77826: Add max77826 regulator driver
  regulator: tps80031: remove redundant assignment to variables ret and val
  ...

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
[robh: Drop $ref on *-supply]
Signed-off-by: Rob Herring <robh@kernel.org>

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
[robh: Drop ref from *-supply]
Signed-off-by: Rob Herring <robh@kernel.org>

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The MT6397 mfd includes a pin controller. Add binding
a description for it.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add device tree binding information for mp2629 mfd driver.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Immutable branch between MFD and HWMON due for the v5.8 merge window