There's several cases of json-schema 'additionalProperties' at the wrong
indentation level which has the effect of making them DT properties. This
is harmless, but let's fix them so a meta-schema check for this can be
added.

In all the cases, either the 'additionalProperties' was extra or doesn't
work because there's a $ref to more properties. In the latter case, we
can use 'unevaluatedProperties' instead.

Reported-by: Iskren Chernev <iskren.chernev@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Saravanan Sekar <sravanhome@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

A recent update to dtc and changes to the default warnings introduced
some new warnings in the DT binding examples:

Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.example.dts:23.13-61:
 Warning (dma_ranges_format): /example-0/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.example.dts:17.22-28.11:
 Warning (unit_address_vs_reg): /example-0/fpga-axi@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dts:34.13-54:
 Warning (dma_ranges_format): /example-0/memory-controller@2c00000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2)
Documentation/devicetree/bindings/mfd/st,stpmic1.example.dts:19.15-79.11:
 Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts:28.23-31.15:
 Warning (unit_address_vs_reg): /example-0/mdio@37000000/switch@10: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dts:17.5-21.11:
 Warning (unit_address_vs_reg): /example-0/rng: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dts:20.20-43.11:
 Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/usb/ingenic,musb.example.dts:18.28-21.11:
 Warning (unit_address_vs_reg): /example-0/usb-phy@0: node has a unit name, but no reg or ranges property

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-spi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The DT example needs #address-cells and #size-cells for I2C bus or
validity checker will generate warnings. Add these properties in
BD71837 and BD71847 binding examples.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull mfd updates from Lee Jones:
 "New Drivers:
   - Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors

  New Device Support:
   - Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
   - Add support for Comet Lake to Intel LPSS

  New Functionality:
   - Add support for Charger Detection to Spreadtrum SC27xx PMICs
   - Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
   - Add ACPI enumeration support to Diolan DLN2 USB Adaptor

  Fix-ups:
   - Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
   - I2C registration; rn5t618
   - Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
   - Use flexible-array members; omap-usb-tll, qcom-pm8xxx
   - Remove unnecessary casts; omap-usb-host, omap-usb-tll
   - Power (suspend/resume/poweroff) enhancements; rk808
   - Improve error/sanity checking; dln2
   - Use snprintf(); aat2870-core

  Bug Fixes:
   - Fix PCI IDs in intel-lpss-pci"

* tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits)
  mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock
  mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow
  mfd: dln2: Allow to be enumerated via ACPI
  mfd: da9062: Add support for interrupt polarity defined in device tree
  dt-bindings: bd718x7: Yamlify and add BD71850
  mfd: dln2: Fix sanity checking for endpoints
  mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs
  mfd: sc27xx: Add USB charger type detection support
  dt-bindings: mfd: Document STM32 low power timer bindings
  mfd: rk808: Convert RK805 to shutdown/suspend hooks
  mfd: rk808: Reduce shutdown duplication
  mfd: rk808: Stop using syscore ops
  mfd: rk808: Ensure suspend/resume hooks always work
  mfd: rk808: Always use poweroff when requested
  mfd: omap: Remove useless cast for driver.name
  mfd: Kconfig: Fix some misspelling of the word functionality
  mfd: pm8xxx: Replace zero-length array with flexible-array member
  mfd: omap-usb-tll: Replace zero-length array with flexible-array member
  mfd: cpcap: Fix compile if MFD_CORE is not selected
  mfd: cros_ec: Check DT node for usbpd-notify add
  ...

Pull devicetree updates from Rob Herring:

 - Unit test for overlays with GPIO hogs

 - Improve dma-ranges parsing to handle dma-ranges with multiple entries

 - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9

 - Improve overlay error reporting

 - Device link support for power-domains and hwlocks bindings

 - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida,
   PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and
   ITE Tech

 - Add deprecated Marvell vendor prefix 'mrvl'

 - A bunch of binding conversions to DT schema continues. Of note, the
   common serial and USB connector bindings are converted.

 - Add more Arm CPU compatibles

 - Drop Mark Rutland as DT maintainer :(

* tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits)
  MAINTAINERS: drop an old reference to stm32 pwm timers doc
  MAINTAINERS: dt: update etnaviv file reference
  dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb
  dt-bindings: uniphier-system-bus: fix warning in the example
  dt-bindings: display: meson-vpu: fix indentation of reg-names' "items"
  dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints
  dt-bindings: power: Fix example for power-domain
  dt-bindings: arm: Add some constraints for PSCI nodes
  of: some unittest overlays not untracked
  of: gpio unittest kfree() wrong object
  dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml
  dt-bindings: serial: sh-sci: Convert to json-schema
  dt-bindings: serial: Document serialN aliases
  dt-bindings: thermal: tsens: Set 'additionalProperties: false'
  dt-bindings: thermal: tsens: Fix nvmem-cell-names schema
  dt-bindings: vendor-prefixes: Add Beacon vendor prefix
  dt-bindings: vendor-prefixes: Add Topwise
  of: of_private.h: Replace zero-length array with flexible-array member
  docs: dt: fix a broken reference to input.yaml
  docs: dt: fix references to ap806-system-controller.txt
  ...

Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.

Ideally, we'd just add this automatically and make this the default, but
there's some cases where it doesn't work. For example, if a common
schema is referenced, then properties in the common schema aren't part
of what's considered for 'additionalProperties'. Also, sometimes there
are bus specific properties such as 'spi-max-frequency' that go into
bus child nodes, but aren't defined in the child node's schema.

So let's stick with the json-schema defined default and add
'additionalProperties: false' where needed. This will be a continual
review comment and game of wack-a-mole.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org> # clock
Acked-by: Lee Jones <lee.jones@linaro.org>

Convert ROHM bd71837 and bd71847 PMIC binding text docs to yaml. Split
the binding document to two separate documents (own documents for BD71837
and BD71847) as they have different amount of regulators. This way we can
better enforce the node name check for regulators. ROHM is also providing
BD71850 - which is almost identical to BD71847 - main difference is some
initial regulator states. The BD71850 can be driven by same driver and it
has same buck/LDO setup as BD71847 - add it to BD71847 binding document and
introduce compatible for it.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add a subnode to STM low power timer bindings to support timer driver

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>