commit 018f2dc3a42098d3b04edd1480adc51d268adb14 upstream.

The Allwinner video engine sits behind the MBUS that is represented as
an interconnect.

Make sure that the interconnect properties are valid in the binding.

Fixes: d41662e52a03 ("media: dt-bindings: media: allwinner,sun4i-a10-video-engine: Add R40 compatible")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull media updates from Mauro Carvalho Chehab:

 - new CSI tegra support, covering Tegra20 and Tegra30

 - new camera sensor drivers: T4ka3 and ov2732

 - m88ds3103: add 3103c chip support

 - uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format

 - synopsys csi2rx: add i.MX93 support

 - imx8-isi: add i.MX95 support

 - imx8mq-mipi-csi2: add i.MX8ULP support

 - dw100: add V4L2 requests support

 - support for DTV devices from Hauppauge got some improvements

 - media staging: dropped starfive-camss driver

 - media docs: document multi-committers model and improve maint profile

 - media core:
    - add v4l2_subdev_get_frame_desc_passthrough() helper
    - improve error handling in fwnode parsing

 - lots of driver fixes, cleanups and improvements

* tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits)
  Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935"
  media: synopsys: csi2rx: add i.MX93 support
  media: dt-bindings: add NXP i.MX93 compatible string
  media: synopsys: csi2rx: Use enum and u32 array for register offsets
  media: synopsys: csi2rx: implement .get_frame_desc() callback
  media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
  media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
  media: i2c: imx283: add support for non-continuous MIPI clock mode
  media: i2c: ov08d10: add support for 24 MHz input clock
  media: i2c: ov08d10: add support for reset and power management
  media: i2c: ov08d10: add support for binding via device tree
  dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor
  media: i2c: ov08d10: add missing newline to prints
  media: i2c: ov08d10: fix some typos in comments
  media: i2c: ov08d10: remove duplicate register write
  media: i2c: ov08d10: fix image vertical start setting
  media: i2c: ov08d10: fix runtime PM handling in probe
  staging: media: ipu7: Update TODO
  media: Add t4ka3 camera sensor driver
  media: i2c: Add ov2732 image sensor driver
  ...

The i.MX93 uses the DW CSI-2 RX controller, which is similar to the
Rockchip RK3568 implementation.

The i.MX93 variant provides one IRQ, two clocks, and no resets. Add the
"fsl,imx93-mipi-csi2" compatible string and keep the same constraints for
RK3568.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Add bindings for the Omnivision OV08D10 CMOS image sensor.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Add bindings for OmniVision OV2732 image sensor.

Signed-off-by: Walter Werner Schneider <contact@schnwalter.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

The CSI-2 receiver in the i.MX8ULP is almost identical to the version
present in the i.MX8QXP/QM, but i.MX8ULP CSI-2 controller needs pclk
clock as the input clock for its APB interface of Control and Status
register(CSR). So add compatible string fsl,imx8ulp-mipi-csi2 and
increase maxItems of Clocks (clock-names) to 4 from 3.  And keep the
same restriction for existing compatible.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251205-csi2_imx8ulp-v10-1-190cdadb20a3@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

The ISI module on i.MX95 supports up to eight channels and four link
sources to obtain the image data for processing in its pipelines. It
can process up to eight image sources at the same time.

Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251105-isi_imx95-v3-1-3987533cca1c@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Allow the orientation and rotation properties from video-interface-devices
to be specified. The sensor can be front or rear facing and can be mounted
at any rotation.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

STM32 DCMI may be in a power domain which is the case for the STM32MP2x
based boards. Allow a single 'power-domains' entry for STM32 DCMI.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Fix IOMMU DT propety for venus via dropping SMMU stream IDs which
relates to secure context bank. Assigning Linux kernel (HLOS) VMID
to secure context bank stream IDs is incorrect. The maximum value
for iommus property is updated accordingly.

These DT bindings changes should be backwards compatible.

Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260122121042.579270-3-sumit.garg@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>