linux-stable.git/Documentation/devicetree/bindings/interrupt-controller, branch v6.9

Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2024-03-15T19:37:59+00:00

Pull devicetree updates from Rob Herring:
 "DT core:

   - Add cleanup.h based auto release of struct device_node pointers via
     __free marking and new for_each_child_of_node_scoped() iterator to
     use it.

   - Always create a base skeleton DT when CONFIG_OF is enabled. This
     supports several usecases of adding DT data on non-DT booted
     systems.

   - Move around some /reserved-memory code in preparation for further
     improvements

   - Add a stub for_each_property_of_node() for !OF

   - Adjust the printk levels on some messages

   - Fix __be32 sparse warning

   - Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
     (currently orphaned)

   - Add Saravana Kannan and drop Frank Rowand as DT maintainers

  DT bindings:

   - Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
     fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
     xlnx,sd-fec to DT schemas

   - Add existing, but undocumented fsl,imx-anatop binding

   - Add bunch of undocumented vendor prefixes used in compatible
     strings

   - Drop obsolete brcm,bcm2835-pm-wdt binding

   - Drop obsolete i2c.txt which as been replaced with schema in
     dtschema

   - Add DPS310 device and sort trivial-devices.yaml

   - Enable undocumented compatible checks on DT binding examples

   - More QCom maintainer fixes/updates

   - Updates to writing-schema.rst and DT submitting-patches.rst to
     cover some frequent review comments

   - Clean-up SPDX tags to use 'OR' rather than 'or'"

* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
  dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
  of: unittest: Use for_each_child_of_node_scoped()
  of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
  of: Add cleanup.h based auto release via __free(device_node) markings
  of: Move all FDT reserved-memory handling into of_reserved_mem.c
  of: Add KUnit test to confirm DTB is loaded
  of: unittest: treat missing of_root as error instead of fixing up
  x86/of: Unconditionally call unflatten_and_copy_device_tree()
  um: Unconditionally call unflatten_device_tree()
  of: Create of_root if no dtb provided by firmware
  of: Always unflatten in unflatten_and_copy_device_tree()
  dt-bindings: timer: mediatek: Convert to json-schema
  dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
  soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
  dt-bindings: fsl-imx-sdma: fix HDMI audio index
  dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
  dt-bindings: soc: imx: fsl,imx-anatop: add binding
  dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
  dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
  of: make for_each_property_of_node() available to to !OF
  ...

dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support

2024-03-07T00:30:59+00:00

Enable the power-domains property for the fsl,intmux node. This addition
accommodates i.MX8QXP, i.MX8QM, and i.MX8DXL, which utilize the
power-domains property. Incorporating this eliminates DTB_CHECK errors in
relevant device tree source files.

Signed-off-by: Frank Li 
Acked-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20240229200911.712572-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring

dt-bindings: interrupt-controller: Convert Atmel AIC to json-schema

2024-03-04T21:03:59+00:00

Convert the Atmel AIC binding document to DT schema format using
json-schema.

Signed-off-by: Dharma Balasubiramani 
Reviewed-by: Conor Dooley 
Link: https://lore.kernel.org/r/20240222090738.41628-1-dharma.b@microchip.com
Signed-off-by: Rob Herring

dt-bindings: interrupt-controller: Add starfive,jh8100-intc

2024-02-26T14:09:18+00:00

StarFive SoCs like the JH8100 use a interrupt controller. Add a binding
for it.

Signed-off-by: Changhuang Liang 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Ley Foon Tan 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20240226055025.1669223-2-changhuang.liang@starfivetech.com

dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs

2024-02-22T17:04:42+00:00

Update dt-binding document for GPIO interrupt controller
of Amlogic-T7 SoCs.

Signed-off-by: Huqiang Qin 
Signed-off-by: Thomas Gleixner 
Acked-by: Conor Dooley 
Link: https://lore.kernel.org/r/20240222074640.1866284-2-huqiang.qin@amlogic.com

dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update interrupts

2024-02-22T16:52:22+00:00

All the RZ/G2L and alike SoC's (listed below) have ECCRAM0/1 interrupts
supported by the IRQC block, reflect the same in DT binding doc.

- R9A07G043U              - RZ/G2UL
- R9A07G044L/R9A07G044LC  - RZ/{G2L,G2LC}
- R9A07G054               - RZ/V2L
- R9A08G045               - RZ/G3S

For the RZ/G3S SoC ("R9A08G045") ECCRAM0/1 interrupts combined into single
interrupt so we just use the below to represent them:
- ec7tie1-0
- ec7tie2-0
- ec7tiovf-0

Previously, it was assumed that BUS-error and ECCRAM0/1 error interrupts
were only supported by RZ/G2UL ("R9A07G043U") and RZ/G3S ("R9A08G045")
SoCs. However, in reality, all RZ/G2L and similar SoCs (listed above)
support these interrupts. Therefore, mark the 'interrupt-names' property
as required for all the SoCs and update the example node in the binding
document.

Fixes: 96fed779d3d4 ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
Fixes: 1cf0697a24ef ("dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S")
Signed-off-by: Lad Prabhakar 
Acked-by: Conor Dooley 
Reviewed-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20240213085912.56600-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Rob Herring

dt-bindings: interrupt-controller: convert MediaTek sysirq to the json-schema

2024-01-30T20:00:40+00:00

This helps validating DTS files.

Signed-off-by: Rafał Miłecki 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20240123060804.32254-1-zajec5@gmail.com
Signed-off-by: Rob Herring

Merge tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

2024-01-19T21:30:49+00:00

Pull LoongArch updates from Huacai Chen:

 - Raise minimum clang version to 18.0.0

 - Enable initial Rust support for LoongArch

 - Add built-in dtb support for LoongArch

 - Use generic interface to support crashkernel=X,[high,low]

 - Some bug fixes and other small changes

 - Update the default config file.

* tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
  MAINTAINERS: Add BPF JIT for LOONGARCH entry
  LoongArch: Update Loongson-3 default config file
  LoongArch: BPF: Prevent out-of-bounds memory access
  LoongArch: BPF: Support 64-bit pointers to kfuncs
  LoongArch: Fix definition of ftrace_regs_set_instruction_pointer()
  LoongArch: Use generic interface to support crashkernel=X,[high,low]
  LoongArch: Fix and simplify fcsr initialization on execve()
  LoongArch: Let cores_io_master cover the largest NR_CPUS
  LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE
  LoongArch: Add a missing call to efi_esrt_init()
  LoongArch: Parsing CPU-related information from DTS
  LoongArch: dts: DeviceTree for Loongson-2K2000
  LoongArch: dts: DeviceTree for Loongson-2K1000
  LoongArch: dts: DeviceTree for Loongson-2K0500
  LoongArch: Allow device trees be built into the kernel
  dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names
  dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names
  dt-bindings: loongarch: Add Loongson SoC boards compatibles
  dt-bindings: loongarch: Add CPU bindings for LoongArch
  LoongArch: Enable initial Rust support
  ...

dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names

2024-01-17T04:43:00+00:00

The Loongson-2K0500/2K1000 CPUs have 64 interrupt sources as inputs, and
a route-mapped node handles up to 32 interrupt sources, so two liointc
nodes are defined in dts{i}.

Of course, we have to make sure that the routing outputs ("intx") of the
two nodes do not conflict, i.e. "int0" can only be used as a routing
output for one of them. Therefore, "interrupt-names" should be defined
as "pattern".

In addition, since "interrupt-names" and "interrupts" are one-to-one
correspondence, we pass it to get the corresponding interrupt number in
the driver. Setting it to "required" does not break ABI, because it is
already logically represented as "required".

This fixes dtbs_check warning:

DTC_CHK arch/loongarch/boot/dts/loongson-2k0500-ref.dtb
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11440: interrupt-names:0: 'int0' was expected
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11440: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
DTC_CHK arch/loongarch/boot/dts/loongson-2k1000-ref.dtb
arch/loongarch/boot/dts/loongson-2k1000-ref.dtb: interrupt-controller@1fe01440: interrupt-names:0: 'int0' was expected
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/loongarch/boot/dts/loongson-2k1000-ref.dtb: interrupt-controller@1fe01440: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml

Acked-by: Jiaxun Yang 
Reviewed-by: Rob Herring 
Signed-off-by: Binbin Zhou 
Signed-off-by: Huacai Chen

dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names

2024-01-17T04:43:00+00:00

As we know, the Loongson-2K0500 is a single-core CPU, and the core1-
related register (isr1) does not exist. So "reg" and "reg-names" should
be set to "minItems 2"(main nad isr0).

This fixes dtbs_check warning:

DTC_CHK arch/loongarch/boot/dts/loongson-2k0500-ref.dtb
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11400: reg-names: ['main', 'isr0'] is too short
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11400: Unevaluated properties are not allowed ('reg-names' was unexpected)
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11400: reg: [[0, 534844416, 0, 64], [0, 534843456, 0, 8]] is too short
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11440: reg-names: ['main', 'isr0'] is too short
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml

Acked-by: Jiaxun Yang 
Reviewed-by: Rob Herring 
Signed-off-by: Binbin Zhou 
Signed-off-by: Huacai Chen