Pull input updates from Dmitry Torokhov:

 - several new device IDs added to xpad game controller driver

 - support for imagis IST3038H variant of chip added to imagis touch
   controller driver

 - a fix for GPIO allocation for ads7846 touch controller driver

 - a fix for iqs7222 driver to properly support status register

 - a fix for goodix-berlin touch controller driver to use the right name
   for the regulator

 - more i8042 quirks to better handle several old Clevo devices.

* tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  MAINTAINERS: Remove myself from the goodix touchscreen maintainers
  Input: iqs7222 - preserve system status register
  Input: i8042 - swap old quirk combination with new quirk for more devices
  Input: i8042 - swap old quirk combination with new quirk for several devices
  Input: i8042 - add required quirks for missing old boardnames
  Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ
  Input: xpad - rename QH controller to Legion Go S
  Input: xpad - add support for TECNO Pocket Go
  Input: xpad - add support for ZOTAC Gaming Zone
  Input: goodix-berlin - fix vddio regulator references
  Input: goodix-berlin - fix comment referencing wrong regulator
  Input: imagis - add support for imagis IST3038H
  dt-bindings: input/touchscreen: imagis: add compatible for ist3038h
  Input: xpad - add multiple supported devices
  Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers
  Input: ads7846 - fix gpiod allocation
  Input: wdt87xx_i2c - fix compiler warning

IST3038H is a touchscreen IC which seems mostly compatible with IST3038C
except that it reports a different chip ID value.

Signed-off-by: Andras Sebok <sebokandris2009@gmail.com>
Link: https://lore.kernel.org/r/20250224090354.102903-4-sebokandris2009@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
     MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
     sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
     Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
     QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
     NXP iMX35 GPT

   - Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
     schema

   - Add Siflower vendor prefix

   - Cleanup display, interrupt-controller, and UFS binding examples'
     indentation

   - Document preferred line wrapping (the same as the rest of the
     kernel)

  DT Core:

   - Add warning when of_property_read_bool() is used on non-boolean
     properties

   - Restore keeping bootloader DTB when booting with ACPI. Turns out
     some x86 platforms relied on that. Shrug.

   - Fix of_find_node_opts_by_path() handling of alias+path+options

   - Fix resource bounds checking for empty resources

   - A bunch of small fixes/cleanups all over from Zijun Hu

   - Cleanups in bin_attribute handling"

* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
  of: address: Fix empty resource handling in __of_address_resource_bounds()
  of/fdt: Restore possibility to use both ACPI and FDT from bootloader
  docs: dt-bindings: Document preferred line wrapping
  dt-bindings: ufs: Correct indentation and style in DTS example
  of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
  of: reserved-memory: Warn for missing static reserved memory regions
  of: Do not expose of_alias_scan() and correct its comments
  dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
  dt-bindings: arm: coresight: Update the pattern of ete node name
  of: Warn when of_property_read_bool() is used on non-boolean properties
  device property: Split property reading bool and presence test ops
  of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
  of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
  of: reserved-memory: Do not make kmemleak ignore freed address
  of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
  of: Remove a duplicated code block
  of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
  of: Correct child specifier used as input of the 2nd nexus node
  dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
  ...

Add compatibles for SoCs using this device (mt8183, mt8365, mt8516).

Signed-off-by: Val Packett <val@packett.cool>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241225192631.25017-2-val@packett.cool
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Add compatible strings for the MT6328 PMIC.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018081050.23592-3-y.oudjana@protonmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Pull input updates from Dmitry Torokhov:

 - support for NT36672A touchscreen added to novatek-nvt-ts driver

 - a change to ads7846 driver to prevent XPT2046 from locking up

 - a change switching platform input dirves back to using remove()
   method (from remove_new())

 - updates to a number of input drivers to use the new cleanup
   facilities (__free(...), guard(), and scoped-guard()) which ensure
   that the resources and locks are released properly and automatically

 - other assorted driver cleanups and fixes.

* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
  Input: mpr121 - use devm_regulator_get_enable_read_voltage()
  Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
  Input: spear-keyboard - don't include 'pm_wakeup.h' directly
  Input: cypress-sf - constify struct i2c_device_id
  Input: ads7846 - increase xfer array size in 'struct ser_req'
  Input: fix the input_event struct documentation
  Input: i8042 - fix typo dublicate to duplicate
  Input: ads7846 - add dummy command register clearing cycle
  Input: cs40l50 - fix wrong usage of INIT_WORK()
  Input: introduce notion of passive observers for input handlers
  Input: maple_keyb - use guard notation when acquiring mutex
  Input: locomokbd - use guard notation when acquiring spinlock
  Input: hilkbd - use guard notation when acquiring spinlock
  Input: synaptics-rmi4 - switch to using cleanup functions in F34
  Input: synaptics - fix a typo
  dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
  Input: omap-keypad - use guard notation when acquiring mutex
  Input: imagis - fix warning regarding 'imagis_3038_data' being unused
  Input: userio - remove unneeded semicolon
  Input: sparcspkr - use cleanup facility for device_node
  ...

Pull MFD updates from Lee Jones:

 - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
   tps65010, have undergone minor code improvements to enhance
   consistency and fix race conditions.

 - The syscon driver now utilizes the regmap max_register_is_0
   capability for consistent register map configuration across syscons
   of all sizes.

 - New device support has been added for QCS8300, qcs615, SA8255p, and
   samsung,s2dos05, expanding the range of compatible hardware.

 - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
   and avoids loading the charger with UCSI, streamlining functionality.

 - The bd96801 driver now utilizes the more modern maple tree register
   cache, improving performance.

 - The da9052-spi driver has undergone a fix to change the read-mask to
   write-mask, preventing potential issues.

 - Unused declarations in max77693 have been removed, and support for
   samsung,s2dos05 has been added, enhancing code clarity and device
   compatibility.

 - Error handling in cs42l43 has been fixed to avoid unbalanced
   regulator put and ensure proper synchronization during driver
   removal.

 - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
   MODULE_ALIAS(), improving code consistency.

 - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
   and reorganized for better clarity and maintainability.

 - The intel_soc_pmic_bxtwc driver has undergone significant
   improvements, including the use of IRQ domains for various devices,
   fixing IRQ domain names duplication, and code refactoring for better
   consistency and maintainability.

 - The ipaq-micro driver has received a fix for a missing break
   statement in the default case, enhancing code robustness.

 - Support for the AXP323 PMIC has been added to the axp20x driver,
   along with ensuring a clear relationship between IDs and model names,
   and allowing multiple regulators, broadening hardware compatibility.

 - The cs42l43 driver now disables IRQs during suspend for improved
   power management.

 - The adp5585 driver has reduced its dependencies by dropping the
   obsolete dependency on COMPILE_TEST.

 - Initial support for the MT6328 PMIC has been added to the mt6397
   driver, expanding the range of supported hardware.

 - The rtc-bd70528 driver has been simplified by dropping the IC name
   from IRQ, improving code readability.

 - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
   updated to enhance clarity and incorporate new features.

 - The rt5033 driver has received a fix for a missing
   regmap_del_irq_chip() in the error handling path.

 - New device support has been added for MSM8917, and the
   intel_soc_pmic_crc driver now supports non-ACPI instantiated
   i2c_client.

 - The 88pm886 driver has added support for the RTC cell, and the tqmx86
   driver has improved its GPIO IRQ setup and added I2C IRQ support,
   increasing functionality.

 - The sprd,sc2731 DT schema has been updated and converted to YAML
   format for better readability and maintainability.

* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
  dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
  dt-bindings: mfd: sprd,sc2731: Convert to YAML
  mfd: tqmx86: Add I2C IRQ support
  mfd: tqmx86: Make IRQ setup errors non-fatal
  mfd: tqmx86: Refactor GPIO IRQ setup
  mfd: tqmx86: Improve gpio_irq module parameter description
  mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
  mfd: 88pm886: Add the RTC cell
  dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
  mfd: intel_soc_pmic_*: Consistently use filename as driver name
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
  mfd: rt5033: Fix missing regmap_del_irq_chip()
  mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
  dt-bindings: mfd: aspeed: Support for AST2700
  mfd: Switch back to struct platform_driver::remove()
  dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
  mfd: rtc: bd7xxxx Drop IC name from IRQ
  mfd: mt6397: Add initial support for MT6328
  mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
  ...

Pull HID updates from Jiri Kosina:

 - improvement in the way hid-bpf coexists with specific drivers (others
   than hid-generic) that are already bound to devices (Benjamin
   Tissoires)

 - removal of three way-too-aggressive BUG_ON()s from HID drivers (He
   Lugang)

 - assorted cleanups and small code fixes to HID core (Dmitry Torokhov,
   Yan Zhen, Nathan Chancellor, Andy Shevchenko)

 - support for Corsair Void headset family (Stuart Hayhurst)

 - Support for Goodix GT7986U SPI (Charles Wang)

 - initial vendor-specific driver for Kysona, currently adding support
   for Kysona M600 (Lode Willems)

 - other assorted code cleanups and small bugfixes all over the place

* tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits)
  HID: multitouch: make mt_set_mode() less cryptic
  HID: hid-goodix-spi: Add OF supports
  dt-bindings: input: Goodix GT7986U SPI HID Touchscreen
  HID: hyperv: streamline driver probe to avoid devres issues
  HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support
  HID: rmi: Add select RMI4_F3A in Kconfig
  HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
  HID: steelseries: Add capacity_level mapping
  HID: steelseries: Fix battery requests stopping after some time
  HID: hid-goodix: Fix HID get/set feature operation overwritten problem
  HID: hid-goodix: Return 0 when receiving an empty HID feature package
  HID: bpf: drop use of Logical|Physical|UsageRange
  HID: bpf: Fix Rapoo M50 Plus Silent side buttons
  HID: bpf: Fix NKRO on Mistel MD770
  HID: replace BUG_ON() with WARN_ON()
  HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set
  HID: Kysona: add basic online status
  HID: Kysona: check battery status every 5s using a workqueue
  HID: Kysona: Add basic battery reporting for Kysona M600
  HID: Add IDs for Kysona
  ...

The Goodix GT7986U touch controller report touch data according to the
HID protocol through the SPI bus. However, it is incompatible with
Microsoft's HID-over-SPI protocol.

NOTE: these bindings are distinct from the bindings used with the
GT7986U when the chip is running I2C firmware. For some background,
see discussion on the mailing lists in the thread:

https://lore.kernel.org/r/20241018020815.3098263-2-charles.goodix@gmail.com

Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

The user and driver both indicate this property is a boolean, not int32.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20241101211304.20886-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>