Pull HID fixes from Benjamin Tissoires:

 - fix potential read out of bounds in hid-asus (Andrew Ballance)

 - fix endian-conversion on little endian systems in intel-ish-hid (Arnd
   Bergmann)

 - A couple of new input event codes (Aseda Aboagye)

 - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
   (Christophe JAILLET), hid-logitech-dj (José Expósito)

 - current leakage fix while the device is in suspend on a i2c-hid
   laptop (Johan Hovold)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreens 2F2C and 4116
  HID: i2c-hid: elan: fix reset suspend current leakage
  dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
  dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
  input: Add support for "Do Not Disturb"
  input: Add event code for accessibility key
  hid: asus: asus_report_fixup: fix potential read out of bounds
  HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
  HID: intel-ish-hid: fix endian-conversion
  HID: nintendo: Fix an error handling path in nintendo_hid_probe()
  HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
  HID: core: remove unnecessary WARN_ON() in implement()
  HID: nvidia-shield: Add missing check for input_ff_create_memless
  HID: intel-ish-hid: Fix build error for COMPILE_TEST

When the power supply is shared with other peripherals the reset line
can be wired in such a way that it can remain deasserted regardless of
whether the supply is on or not.

This is important as it can be used to avoid holding the controller in
reset for extended periods of time when it remains powered, something
which can lead to increased power consumption. Leaving reset deasserted
also avoids leaking current through the reset circuitry pull-up
resistors.

Add a new 'no-reset-on-power-off' devicetree property which can be used
by the OS to determine when reset needs to be asserted on power down.

Note that this property can also be used when the supply cannot be
turned off by the OS at all.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240507144821.12275-4-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

Add a compatible string for the Elan eKTH5015M touch controller.

Judging from the current binding and commit bd3cba00dcc6 ("HID: i2c-hid:
elan: Add support for Elan eKTH6915 i2c-hid touchscreens"), eKTH5015M
appears to be compatible with eKTH6915. Notably the power-on sequence is
the same.

While at it, drop a redundant label from the example.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-3-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

The Ilitek ILI2901 touch screen controller was apparently incorrectly
added to the Elan eKTH6915 schema simply because it also has a reset
gpio and is currently managed by the Elan driver in Linux.

The two controllers are not related even if an unfortunate wording in
the commit message adding the Ilitek compatible made it sound like they
were.

Add a dedicated schema for the ILI2901 which does not specify the I2C
address (which is likely 0x41 rather than 0x10 as for other Ilitek touch
controllers) to avoid cluttering the Elan schema with unrelated devices
and to make it easier to find the correct schema when adding further
Ilitek controllers.

Fixes: d74ac6f60a7e ("dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901")
Cc: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240507144821.12275-2-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

Pull input updates from Dmitry Torokhov:

 - a change to input core to trim amount of keys data in modalias string
   in case when a device declares too many keys and they do not fit in
   uevent buffer instead of reporting an error which results in uevent
   not being generated at all

 - support for Machenike G5 Pro Controller added to xpad driver

 - support for FocalTech FT5452 and FT8719 added to edt-ft5x06

 - support for new SPMI vibrator added to pm8xxx-vibrator driver

 - missing locking added to cyapa touchpad driver

 - removal of unused fields in various driver structures

 - explicit initialization of i2c_device_id::driver_data to 0 dropped
   from input drivers

 - other assorted fixes and cleanups.

* tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719
  dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support
  Input: xpad - add support for Machenike G5 Pro Controller
  Input: try trimming too long modalias strings
  Input: drop explicit initialization of struct i2c_device_id::driver_data to 0
  Input: zet6223 - remove an unused field in struct zet6223_ts
  Input: chipone_icn8505 - remove an unused field in struct icn8505_data
  Input: cros_ec_keyb - remove an unused field in struct cros_ec_keyb
  Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drv
  Input: matrix_keypad - remove an unused field in struct matrix_keypad
  Input: tca6416-keypad - remove unused struct tca6416_drv_data
  Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chip
  Input: da7280 - remove an unused field in struct da7280_haptic
  Input: ff-core - prefer struct_size over open coded arithmetic
  Input: cyapa - add missing input core locking to suspend/resume functions
  input: pm8xxx-vibrator: add new SPMI vibrator support
  dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
  input: pm8xxx-vibrator: refactor to support new SPMI vibrator
  Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation
  Input: sur40 - convert le16 to cpu before use
  ...

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for X-Powers AXP717 PMIC to AXP22X
   - Add support for Rockchip RK816 PMIC to RK8XX
   - Add support for TI TPS65224 PMIC to TPS6594

  New Functionality:
   - Add Power Off functionality to Rohm BD71828
   - Allow I2C SMBus access in Renesas RSMU

  Fix-ups:
   - Device Tree binding adaptions/conversions/creation
   - Shift Intel support over to MSI interrupts
   - Generify adding platform data away from being ACPI specific
   - Use device core supplied attribute to register sysfs entries
   - Replace hand-rolled functionality with generic APIs
   - Utilise centrally provided helpers and macros
   - Clean-up error handling
   - Remove superfluous/duplicated/unused sections
   - Trivial; spelling, whitespace, coding-style adaptions
   - More Maple Tree conversions"

* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
  dt-bindings: mfd: Use full path to other schemas
  mfd: rsmu: support I2C SMBus access
  dt-bindings: mfd: Convert lp873x.txt to json-schema
  dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
  dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
  mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
  mfd: kempld: Remove custom DMI matching code
  mfd: cs42l43: Update patching revision check
  dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
  mfd: timberdale: Remove redundant assignment to variable err
  dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
  dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
  dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
  mfd: axp20x: Convert to use Maple Tree register cache
  mfd: bd71828: Remove commented code lines
  mfd: intel-m10-bmc: Change staging size to a variable
  dt-bindings: mfd: Add ROHM BD71879
  mfd: Tidy Kconfig dependency's parentheses
  mfd: ocelot-spi: Use spi_sync_transfer()
  dt-bindings: mfd: syscon: Add missing simple syscon compatibles
  ...

Document FocalTech FT5452 and FT8719 support by adding their compatibles.

Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240521-add-support-ft5452-and-ft8719-touchscreen-v1-1-2a648ac7176b@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert subdevices with just an interrupt and compatbile to
json-schema and wire up already converted subdevices.
RTC is available in all variants, so allow it unconditionally.
GPADC binding for TWL603X uses two different compatibles, so
specify just the compatible and do not include it.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240401081831.456828-1-andreas@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>

When referencing other schema, it is preferred to use an absolute path
(/schemas/....), which allows also an seamless move of particular schema
out of Linux kernel to dtschema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240505084618.135705-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Add compatible strings to support vibrator module inside PMI632,
PMI7250B, PM7325B, PM7550BA.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/20240416-pm8xxx-vibrator-new-design-v11-2-7b1c951e1515@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>