<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/Documentation/devicetree/bindings/input, branch v6.1</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>Merge tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input</title>
<updated>2022-11-19T01:56:29+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2022-11-19T01:56:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=fe24a97cf2543e8832e7a2124802e5c32aac05aa'/>
<id>fe24a97cf2543e8832e7a2124802e5c32aac05aa</id>
<content type='text'>
Pull input fixes from Dmitry Torokhov:

 - a fix for 8042 to stop leaking platform device on unload

 - a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we
   need to reset controller to load config from firmware

 - a workaround for Acer Switch to avoid interrupt storm from home and
   power buttons

 - a workaround for more ASUS ZenBook models to detect keyboard
   controller

 - a fix for iforce driver to properly handle communication errors

 - touchpad on HP Laptop 15-da3001TU switched to RMI mode

* tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - fix leaking of platform device on module removal
  Input: i8042 - apply probe defer to more ASUS ZenBook models
  Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]
  Input: soc_button_array - add use_low_level_irq module parameter
  Input: iforce - invert valid length check when fetching device IDs
  Input: goodix - try resetting the controller when no config is set
  dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip
  Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull input fixes from Dmitry Torokhov:

 - a fix for 8042 to stop leaking platform device on unload

 - a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we
   need to reset controller to load config from firmware

 - a workaround for Acer Switch to avoid interrupt storm from home and
   power buttons

 - a workaround for more ASUS ZenBook models to detect keyboard
   controller

 - a fix for iforce driver to properly handle communication errors

 - touchpad on HP Laptop 15-da3001TU switched to RMI mode

* tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - fix leaking of platform device on module removal
  Input: i8042 - apply probe defer to more ASUS ZenBook models
  Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]
  Input: soc_button_array - add use_low_level_irq module parameter
  Input: iforce - invert valid length check when fetching device IDs
  Input: goodix - try resetting the controller when no config is set
  dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip
  Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip</title>
<updated>2022-10-17T04:49:30+00:00</updated>
<author>
<name>Sheng-Liang Pan</name>
<email>sheng-liang.pan@quanta.corp-partner.google.com</email>
</author>
<published>2022-10-17T04:47:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a01aca4b05174b6dee2392ec44406f85e0f8bd46'/>
<id>a01aca4b05174b6dee2392ec44406f85e0f8bd46</id>
<content type='text'>
Add a compatible for Goodix touch screen chip GT7986U which is
is expected to be fully compatible with a driver written for GT7375P.

Signed-off-by: Sheng-Liang Pan &lt;sheng-liang.pan@quanta.corp-partner.google.com&gt;
Reviewed-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Link: https://lore.kernel.org/r/20221006185333.v7.3.I52e4b4b20e2eb0ae20f2a9bb198aa6410f04cf16@changeid
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a compatible for Goodix touch screen chip GT7986U which is
is expected to be fully compatible with a driver written for GT7375P.

Signed-off-by: Sheng-Liang Pan &lt;sheng-liang.pan@quanta.corp-partner.google.com&gt;
Reviewed-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Link: https://lore.kernel.org/r/20221006185333.v7.3.I52e4b4b20e2eb0ae20f2a9bb198aa6410f04cf16@changeid
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input</title>
<updated>2022-10-11T17:53:25+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2022-10-11T17:53:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=694b37a5dd3c87235e02fabbe7b394f6ab1f444b'/>
<id>694b37a5dd3c87235e02fabbe7b394f6ab1f444b</id>
<content type='text'>
Pull input updates from Dmitry Torokhov:

 - a new driver for IBM Operational Panel

 - a new driver for PinePhone keyboards

 - RT5120 PMIC power key support

 - various enhancements and support for new models in xpad (Xbox) driver

 - a new compatible ID for Elan touchscreen driver

 - rework of adp5588-keys driver to support configuring via device
   properties (OF, ACPI, etc) instead of platform data, and proper
   support of optional gpiochip functionality (and removal of
   gpio-adp5588 driver)

 - improvements to firmware update handling in Synaptics RMI4 driver

 - support for double key matrix in mt6779-keypad

 - support for polled mode in adc-joystick driver

 - other assorted driver fixes, cleanups and improvements

* tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits)
  Input: i8042 - fix refount leak on sparc
  Input: i8042 - add LoongArch support in i8042-acpipnpio.h
  Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h
  Input: pinephone-keyboard - support the proxied I2C bus
  Input: pinephone-keyboard - add PinePhone keyboard driver
  dt-bindings: input: Add the PinePhone keyboard binding
  dt-bindings: input: Convert hid-over-i2c to DT schema
  input: drop empty comment blocks
  Input: xpad - add X-Box Adaptive Profile button
  Input: add ABS_PROFILE to uapi and documentation
  Input: xpad - add X-Box Adaptive XBox button
  Input: xpad - add X-Box Adaptive support
  Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -&gt; "BOOTLOADER"
  Input: ibm-panel - add missing MODULE_DEVICE_TABLE
  Input: icn8505 - utilize acpi_get_subsystem_id()
  Input: xpad - decipher xpadone packages with GIP defines
  Input: xpad - refactor using BIT() macro
  Input: synaptics-rmi4 - convert to use sysfs_emit() APIs
  Input: twl4030-pwrbutton - add missing of.h include
  Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull input updates from Dmitry Torokhov:

 - a new driver for IBM Operational Panel

 - a new driver for PinePhone keyboards

 - RT5120 PMIC power key support

 - various enhancements and support for new models in xpad (Xbox) driver

 - a new compatible ID for Elan touchscreen driver

 - rework of adp5588-keys driver to support configuring via device
   properties (OF, ACPI, etc) instead of platform data, and proper
   support of optional gpiochip functionality (and removal of
   gpio-adp5588 driver)

 - improvements to firmware update handling in Synaptics RMI4 driver

 - support for double key matrix in mt6779-keypad

 - support for polled mode in adc-joystick driver

 - other assorted driver fixes, cleanups and improvements

* tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits)
  Input: i8042 - fix refount leak on sparc
  Input: i8042 - add LoongArch support in i8042-acpipnpio.h
  Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h
  Input: pinephone-keyboard - support the proxied I2C bus
  Input: pinephone-keyboard - add PinePhone keyboard driver
  dt-bindings: input: Add the PinePhone keyboard binding
  dt-bindings: input: Convert hid-over-i2c to DT schema
  input: drop empty comment blocks
  Input: xpad - add X-Box Adaptive Profile button
  Input: add ABS_PROFILE to uapi and documentation
  Input: xpad - add X-Box Adaptive XBox button
  Input: xpad - add X-Box Adaptive support
  Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -&gt; "BOOTLOADER"
  Input: ibm-panel - add missing MODULE_DEVICE_TABLE
  Input: icn8505 - utilize acpi_get_subsystem_id()
  Input: xpad - decipher xpadone packages with GIP defines
  Input: xpad - refactor using BIT() macro
  Input: synaptics-rmi4 - convert to use sysfs_emit() APIs
  Input: twl4030-pwrbutton - add missing of.h include
  Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux</title>
<updated>2022-10-10T20:13:51+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2022-10-10T20:13:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=706eacadd5c5cc13510ba69eea2917c2ce5ffa99'/>
<id>706eacadd5c5cc13510ba69eea2917c2ce5ffa99</id>
<content type='text'>
Pull devicetree updates from Rob Herring:
 "DT core:

   - Fix node refcounting in of_find_last_cache_level()

   - Constify device_node in of_device_compatible_match()

   - Fix 'dma-ranges' handling in bus controller nodes

   - Fix handling of initrd start &gt; end

   - Improve error reporting in of_irq_init()

   - Taint kernel on DT unittest running

   - Use strscpy instead of strlcpy

   - Add a build target, dt_compatible_check, to check for compatible
     strings used in kernel sources against compatible strings in DT
     schemas.

   - Handle DT_SCHEMA_FILES changes when rebuilding

  DT bindings:

   - LED bindings for MT6370 PMIC

   - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
     mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
     and arm,versatile-sysreg to DT schema format

   - Add nvmem cells to u-boot,env schema

   - Add more LED_COLOR_ID definitions

   - Require 'opp-table' uses to be a node

   - Various schema fixes to match QEMU 'virt' DT usage

   - Tree wide dropping of redundant 'Device Tree Binding' in schema
     titles

   - More (unevaluated|additional)Properties fixes in schema child nodes

   - Drop various redundant minItems equal to maxItems"

* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
  of: base: Shift refcount decrement in of_find_last_cache_level()
  dt-bindings: leds: Add MediaTek MT6370 flashlight
  dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  dt-bindings: mailbox: Convert mtk-gce to DT schema
  of: base: make of_device_compatible_match() accept const device node
  of: Fix "dma-ranges" handling for bus controllers
  of: fdt: Remove unused struct fdt_scan_status
  dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
  dt-bindings: timer: Add power-domains for TI timer-dm on K3
  dt: Add a check for undocumented compatible strings in kernel
  kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
  dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
  dt-bindings: i2c: migrate mt7621 text bindings to YAML
  dt-bindings: power: gpcv2: correct patternProperties
  dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
  dt-bindings: timer: arm,arch_timer: Allow dual compatible string
  dt-bindings: arm: cpus: Add kryo240 compatible
  dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
  dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
  dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull devicetree updates from Rob Herring:
 "DT core:

   - Fix node refcounting in of_find_last_cache_level()

   - Constify device_node in of_device_compatible_match()

   - Fix 'dma-ranges' handling in bus controller nodes

   - Fix handling of initrd start &gt; end

   - Improve error reporting in of_irq_init()

   - Taint kernel on DT unittest running

   - Use strscpy instead of strlcpy

   - Add a build target, dt_compatible_check, to check for compatible
     strings used in kernel sources against compatible strings in DT
     schemas.

   - Handle DT_SCHEMA_FILES changes when rebuilding

  DT bindings:

   - LED bindings for MT6370 PMIC

   - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
     mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
     and arm,versatile-sysreg to DT schema format

   - Add nvmem cells to u-boot,env schema

   - Add more LED_COLOR_ID definitions

   - Require 'opp-table' uses to be a node

   - Various schema fixes to match QEMU 'virt' DT usage

   - Tree wide dropping of redundant 'Device Tree Binding' in schema
     titles

   - More (unevaluated|additional)Properties fixes in schema child nodes

   - Drop various redundant minItems equal to maxItems"

* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
  of: base: Shift refcount decrement in of_find_last_cache_level()
  dt-bindings: leds: Add MediaTek MT6370 flashlight
  dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  dt-bindings: mailbox: Convert mtk-gce to DT schema
  of: base: make of_device_compatible_match() accept const device node
  of: Fix "dma-ranges" handling for bus controllers
  of: fdt: Remove unused struct fdt_scan_status
  dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
  dt-bindings: timer: Add power-domains for TI timer-dm on K3
  dt: Add a check for undocumented compatible strings in kernel
  kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
  dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
  dt-bindings: i2c: migrate mt7621 text bindings to YAML
  dt-bindings: power: gpcv2: correct patternProperties
  dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
  dt-bindings: timer: arm,arch_timer: Allow dual compatible string
  dt-bindings: arm: cpus: Add kryo240 compatible
  dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
  dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
  dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'next' into for-linus</title>
<updated>2022-10-10T05:30:23+00:00</updated>
<author>
<name>Dmitry Torokhov</name>
<email>dmitry.torokhov@gmail.com</email>
</author>
<published>2022-10-10T05:30:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5f8f8574c7f5585b09a9623f0f13462e4eb67b4d'/>
<id>5f8f8574c7f5585b09a9623f0f13462e4eb67b4d</id>
<content type='text'>
Prepare input updates for 6.1 merge window.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Prepare input updates for 6.1 merge window.
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: input: Add the PinePhone keyboard binding</title>
<updated>2022-10-01T06:22:30+00:00</updated>
<author>
<name>Samuel Holland</name>
<email>samuel@sholland.org</email>
</author>
<published>2022-10-01T05:52:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=75024261403af74051e6aeb1b0a2dc2bca2458dc'/>
<id>75024261403af74051e6aeb1b0a2dc2bca2458dc</id>
<content type='text'>
Add devicetree support for the PinePhone keyboard case, which provides a
matrix keyboard interface and a proxied I2C bus.

Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Signed-off-by: Samuel Holland &lt;samuel@sholland.org&gt;
Link: https://lore.kernel.org/r/20220618165747.55709-2-samuel@sholland.org
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add devicetree support for the PinePhone keyboard case, which provides a
matrix keyboard interface and a proxied I2C bus.

Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Signed-off-by: Samuel Holland &lt;samuel@sholland.org&gt;
Link: https://lore.kernel.org/r/20220618165747.55709-2-samuel@sholland.org
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: input: Convert hid-over-i2c to DT schema</title>
<updated>2022-10-01T04:00:55+00:00</updated>
<author>
<name>Rob Herring</name>
<email>robh@kernel.org</email>
</author>
<published>2022-10-01T03:50:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1d666ab2dad5b311cd7d742607afcc59a2558925'/>
<id>1d666ab2dad5b311cd7d742607afcc59a2558925</id>
<content type='text'>
Convert the hid-over-i2c binding to DT schema format. The supplies should
probably be specific to a specific device, but it seems they are already
in use otherwise. 'wakeup-source' is added as it was not explicitly
documented.

There's a few warnings for undocumented properties 'vcc-supply' and
'reset-gpios'. Those remain as they probably should have a specific
compatible as well.

Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
Link: https://lore.kernel.org/r/20220927150916.1091217-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Convert the hid-over-i2c binding to DT schema format. The supplies should
probably be specific to a specific device, but it seems they are already
in use otherwise. 'wakeup-source' is added as it was not explicitly
documented.

There's a few warnings for undocumented properties 'vcc-supply' and
'reset-gpios'. Those remain as they probably should have a specific
compatible as well.

Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
Link: https://lore.kernel.org/r/20220927150916.1091217-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: input: qcom,pm8xxx-vib: convert to yaml</title>
<updated>2022-09-25T06:25:47+00:00</updated>
<author>
<name>Luca Weiss</name>
<email>luca@z3ntu.xyz</email>
</author>
<published>2022-09-17T15:57:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=4160f9680d7f8bb0f4e4e114869146a694347b89'/>
<id>4160f9680d7f8bb0f4e4e114869146a694347b89</id>
<content type='text'>
Convert the PM8xxx PMIC Vibrator bindings to dt-schema.

Signed-off-by: Luca Weiss &lt;luca@z3ntu.xyz&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Link: https://lore.kernel.org/r/20220917155705.2284-1-luca@z3ntu.xyz
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Convert the PM8xxx PMIC Vibrator bindings to dt-schema.

Signed-off-by: Luca Weiss &lt;luca@z3ntu.xyz&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Link: https://lore.kernel.org/r/20220917155705.2284-1-luca@z3ntu.xyz
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: input: touchscreen: elants_i2c: Add compatible for eth3915n chip</title>
<updated>2022-09-23T16:44:02+00:00</updated>
<author>
<name>Yunlong Jia</name>
<email>ecs.beijing2022@gmail.com</email>
</author>
<published>2022-09-23T16:35:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1a8339c6bdcf7d66a83152ee5ff13c50da761295'/>
<id>1a8339c6bdcf7d66a83152ee5ff13c50da761295</id>
<content type='text'>
This adds a new compatible string for Elan eth3915n touchscreen controller,
which is compatible with ekth3500.

Signed-off-by: Yunlong Jia &lt;ecs.beijing2022@gmail.com&gt;
Suggested-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Reviewed-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Link: https://lore.kernel.org/r/20220923083657.v5.2.Ic4e8f03868f88b8027a81bc3d414bae68978e6b7@changeid
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This adds a new compatible string for Elan eth3915n touchscreen controller,
which is compatible with ekth3500.

Signed-off-by: Yunlong Jia &lt;ecs.beijing2022@gmail.com&gt;
Suggested-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Reviewed-by: Douglas Anderson &lt;dianders@chromium.org&gt;
Link: https://lore.kernel.org/r/20220923083657.v5.2.Ic4e8f03868f88b8027a81bc3d414bae68978e6b7@changeid
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: input: auo-pixcir-ts: fix gpio and interrupt properties</title>
<updated>2022-09-16T13:38:51+00:00</updated>
<author>
<name>Dmitry Torokhov</name>
<email>dmitry.torokhov@gmail.com</email>
</author>
<published>2022-09-14T14:14:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=437d49b051e8ca80d2ffa8f3fd98ce58755c2758'/>
<id>437d49b051e8ca80d2ffa8f3fd98ce58755c2758</id>
<content type='text'>
Add proper interrupt trigger and gpio polarity data to the binding example.

Reviewed-by: Heiko Stuebner &lt;heiko@sntech.de&gt;
Link: https://lore.kernel.org/r/20220914141428.2201784-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add proper interrupt trigger and gpio polarity data to the binding example.

Reviewed-by: Heiko Stuebner &lt;heiko@sntech.de&gt;
Link: https://lore.kernel.org/r/20220914141428.2201784-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
