linux-stable.git/Documentation/devicetree/bindings/input, branch v3.16

Input: tsc2005 - add DT support

2014-05-29T07:06:00+00:00

This adds DT support to the tsc2005 touchscreen driver. It also adds
regulator support to the driver if booted via DT.

Reviewed-by: Pavel Machek 
Acked-by: Aaro Koskinen 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Dmitry Torokhov

Input: add common DT binding for touchscreens

2014-05-29T07:05:59+00:00

Add common DT binding documentation for touchscreen devices and
implement input_parse_touchscreen_of_params, which parses the common
properties and configures the input device accordingly.

The method currently does not interpret the axis inversion properties,
since there is no matching flag in the generic linux input device.

Reviewed-by: Pavel Machek 
Acked-by: Aaro Koskinen 
Signed-off-by: Sebastian Reichel 
Signed-off-by: Dmitry Torokhov

Input: gpio-keys - move the gpio-keys bindings documentation

2014-05-18T20:43:18+00:00

This is an input driver and belongs to input not gpio.

Signed-off-by: Ezequiel Garcia 
Acked-by: Linus Walleij 
Signed-off-by: Dmitry Torokhov

Input: sun4i-ts - add support for temperature sensor

2014-05-14T23:40:06+00:00

The sun4i resisitive touchscreen controller also comes with a built-in
temperature sensor. This commit adds support for it.

This commit also introduces a new "ts-attached" device-tree property,
when this is not set, the input part of the driver won't register. This way
the internal temperature sensor can be used to measure the SoC temperature
independent of there actually being a touchscreen attached to the controller.

Signed-off-by: Hans de Goede 
Reviewed-by: Guenter Roeck 
Acked-by: Maxime Ripard 
Signed-off-by: Dmitry Torokhov

Input: add driver for Allwinner sunxi SoC's rtp controller

2014-05-14T23:40:06+00:00

Note the sun4i-ts controller is capable of detecting a second touch, but
when a second touch is present then the accuracy becomes so bad the
reported touch location is not useable.

The original android driver contains some complicated heuristics using the
aprox. distance between the 2 touches to see if the user is making a pinch
open / close movement, and then reports emulated multi-touch events around
the last touch coordinate (as the dual-touch coordinates are worthless).

These kinds of heuristics are just asking for trouble (and don't belong in
the kernel). So this driver offers straight forward, reliable single touch
functionality only.

Signed-off-by: Hans de Goede 
Acked-by: Maxime Ripard 
Signed-off-by: Dmitry Torokhov

Input: add st-keyscan driver

2014-05-14T23:39:46+00:00

This patch adds ST Keyscan driver to use the keypad hw a subset of ST
boards provide. Specific board setup will be put in the given dt.

Signed-off-by: Gabriel Fernandez 
Signed-off-by: Giuseppe Condorelli 
Signed-off-by: Dmitry Torokhov

Input: pm8xxx-vibrator - add DT match table

2014-03-30T20:25:20+00:00

The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.

Signed-off-by: Stephen Boyd 
Signed-off-by: Dmitry Torokhov

Input: pmic8xxx-pwrkey - migrate to DT

2014-03-30T20:25:19+00:00

The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.

Signed-off-by: Stephen Boyd 
Signed-off-by: Dmitry Torokhov

Input: pmic8xxx-keypad - migrate to DT

2014-03-30T20:25:19+00:00

The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.

Signed-off-by: Stephen Boyd 
Signed-off-by: Dmitry Torokhov

Input: add new driver for ARM CLPS711X keypad

2014-03-30T20:24:55+00:00

This patch adds a new driver for keypad for Cirrus Logic CLPS711X CPUs.
Target CPU contain keyboard interface which can scan 8 column lines,
so we can read row GPIOs to read status and determine asserted state.

Signed-off-by: Alexander Shiyan 
Signed-off-by: Dmitry Torokhov