Pull input updates from Dmitry Torokhov: - a new driver for Goodix Berlin I2C and SPI touch controllers - support for IQS7222D v1.1 and v1.2 in iqs7222 driver - support for IST3032C and IST3038B parts in Imagis touchscreen driver - support for touch keys for Imagis touchscreen controllers - support for Snakebyte GAMEPADs in xpad driver - various cleanups and conversions to yaml for device tree bindings - assorted fixes and cleanups - old Synaptics navpoint driver has been removed since the only board that used it (HP iPAQ hx4700) was removed a while ago. * tag 'input-for-v6.9-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (37 commits) Input: xpad - add support for Snakebyte GAMEPADs dt-bindings: input: samsung,s3c6410-keypad: convert to DT Schema Input: imagis - add touch key support dt-bindings: input: imagis: Document touch keys Input: imagis - use FIELD_GET where applicable Input: make input_class constant dt-bindings: input: atmel,captouch: convert bindings to YAML Input: iqs7222 - add support for IQS7222D v1.1 and v1.2 dt-bindings: input: allwinner,sun4i-a10-lrad: drop redundant type from label Input: serio - make serio_bus const Input: synaptics-rmi4 - make rmi_bus_type const Input: xilinx_ps2 - fix kernel-doc for xps2_of_probe function input/touchscreen: imagis: add support for IST3032C dt-bindings: input/touchscreen: imagis: add compatible for IST3032C input/touchscreen: imagis: Add support for Imagis IST3038B dt-bindings: input/touchscreen: Add compatible for IST3038B input/touchscreen: imagis: Correct the maximum touch area value Input: leds - change config symbol dependency for audio mute trigger Input: ti_am335x_tsc - remove redundant assignment to variable config Input: xpad - sort xpad_device by vendor and product ID ...
IST3032C (and possibly some other models) has touch keys. Document this. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240306-b4-imagis-keys-v3-2-2c429afa8420@skole.hr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert the i.MX6UL touchscreen DT binding to YAML. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20240226212740.2019837-3-sre@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
IST3032C is a touchscreen IC which seems mostly compatible with IST3038C except that it reports a different chip ID value. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-5-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Imagis IST3038B is a variant (firmware?) of Imagis IST3038 IC differing from IST3038C in its register interface. Add the compatible for it to the IST3038C bindings. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> [balejk@matfyz.cz: elaborate chip differences in the commit message] Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-3-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Document the Goodix GT9916 wich is part of the "Berlin" serie of Touchscreen controllers IC from Goodix. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240129-topic-goodix-berlin-upstream-initial-v15-1-6f7d096c0a0a@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a compatible for MMS252 touchscreen which appears to work fine with the MMS114 driver. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bryant Mairs <bryant@mai.rs> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231105204759.37107-2-bryant@mai.rs Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The irq-gpios description misleading, apparently saying that driving the IRQ GPIO resets the device, which is even more puzzling as there is a reset GPIO as well. In reality the IRQ pin can be driven during the reset sequence to configure the client address, as it becomes clear after checking both the datasheet and the driver code. Improve the text to clarify that. Also rephrase to remove reference to the driver, which is not appropriate in the bindings. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20240102081934.11293-1-luca.ceresoli@bootlin.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
dtschema package defines firmware-name as string-array, so individual bindings should not make it a string but instead just narrow the number of expected firmware file names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240115182057.1610195-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov: - a new driver for Adafruit Seesaw gamepad device - Zforce touchscreen will handle standard device properties for axis swap/inversion - handling of advanced sensitivity settings in Microchip CAP11xx capacitive sensor driver - more drivers have been converted to use newer gpiod API - support for dedicated wakeup IRQs in gpio-keys dirver - support for slider gestures and OTP variants in iqs269a driver - atkbd will report keyboard version as 0xab83 in cases when GET ID command was skipped (to deal with problematic firmware on newer laptops), restoring the previous behavior - other assorted cleanups and changes * tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: atkbd - use ab83 as id when skipping the getid command Input: driver for Adafruit Seesaw Gamepad dt-bindings: input: bindings for Adafruit Seesaw Gamepad Input: da9063_onkey - avoid explicitly setting input's parent Input: da9063_onkey - avoid using OF-specific APIs Input: iqs269a - add support for OTP variants dt-bindings: input: iqs269a: Add bindings for OTP variants Input: iqs269a - add support for slider gestures dt-bindings: input: iqs269a: Add bindings for slider gestures Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages Input: zforce_ts - accept standard touchscreen properties dt-bindings: touchscreen: neonode,zforce: Use standard properties dt-bindings: touchscreen: convert neonode,zforce to json-schema dt-bindings: input: convert drv266x to json-schema Input: da9063 - use dev_err_probe() Input: da9063 - drop redundant prints in probe() Input: da9063 - simplify obtaining OF match data Input: as5011 - convert to GPIO descriptor Input: omap-keypad - drop optional GPIO support Input: tca6416-keypad - drop unused include ...