linux-stable.git/Documentation/devicetree/bindings/devfreq, branch v4.18

docs: Fix more broken references

2018-06-15T21:11:26+00:00

As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.

Acked-by: Matthias Brugger 
Acked-by: Takashi Iwai 
Acked-by: Jeff Kirsher 
Acked-by: Guenter Roeck 
Acked-by: Miguel Ojeda 
Signed-off-by: Mauro Carvalho Chehab 
Acked-by: Jonathan Corbet

dt-bindings: Use lower case hex in unit-addresses

2017-12-26T16:37:05+00:00

DT unit addresses should be lower case hex. Fix all the
binding examples.

Converted with the following command from Krzysztof Kozlowski:

sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt')

Signed-off-by: Rob Herring

dt-bindings: Remove leading 0x from bindings notation

2017-12-06T20:56:33+00:00

Improve the binding example by removing all the leading 0x to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

Converted using the following command:

find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} +

This is a follow up to commit 48c926cd3414

Signed-off-by: Mathieu Malaterre 
Signed-off-by: Rob Herring

dt-bindings: Remove "status" from examples

2017-09-05T15:03:06+00:00

Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland 
Signed-off-by: Rob Herring

ARM: dts: exynos: Use - instead of @ for DT OPP entries

2017-04-20T16:06:03+00:00

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski 
Reported-by: Masahiro Yamada 
Suggested-by: Mark Rutland 
Signed-off-by: Viresh Kumar 
Reviewed-by: Chanwoo Choi 
Reviewed-by: Krzysztof Kozlowski 
Acked-by: Rob Herring 
[k.kozlowski: Split patch per ARM and ARM64]
Signed-off-by: Krzysztof Kozlowski

PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433

2017-01-31T05:12:18+00:00

This patch adds the detailed corrleation between sub-blocks and VDD_INT power
line for Exynos5433. VDD_INT provided the power source to INT (Internal) block.

Signed-off-by: Chanwoo Choi 
Signed-off-by: MyungJoo Ham

Documentation: bindings: add dt documentation for rk3399 dmc

2016-09-06T04:25:36+00:00

This patch adds the documentation for rockchip rk3399 dmc driver.

Signed-off-by: Lin Huang 
Reviewed-by: Chanwoo Choi 
Signed-off-by: MyungJoo Ham

Documentation: bindings: add dt documentation for dfi controller

2016-09-06T04:25:23+00:00

This patch adds the documentation for rockchip dfi devfreq-event driver.

Signed-off-by: Lin Huang 
Acked-by: Chanwoo Choi 
Signed-off-by: MyungJoo Ham

PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus

2016-05-03T02:22:06+00:00

This patch adds the detailed corrleation between sub-blocks and power line
for Exynos5422.

Signed-off-by: Chanwoo Choi 
Acked-by: MyungJoo Ham

PM / devfreq: event: Add new Exynos NoC probe driver

2016-05-03T02:21:07+00:00

This patch adds NoC (Network on Chip) Probe driver which provides
the primitive values to get the performance data. The packets that the Network
on Chip (NoC) probes detects are transported over the network infrastructure.
Exynos542x bus has multiple NoC probes to provide bandwidth information about
behavior of the SoC that you can use while analyzing system performance.

Signed-off-by: Chanwoo Choi 
Tested-by: Markus Reichl 
Tested-by: Anand Moon 
Reviewed-by: Krzysztof Kozlowski